Slip safety risk analysis of surface properties using the coefficients of friction of rocks

This study was conducted to determine the most appropriate surface processing techniques (SPT), environmental conditions (EC) and surface roughness (SR) to minimize the risk of slipping when pedestrians walk on a floor covering of rocks barefoot and with shoes. Coefficients of friction (COFs) and values of SR were found using five different types of rocks, four SPT and two (ramp and pendulum) tests. Results indicate that the parameters which affect the COF values of rocks include SR, EC and SPT. Simple linear regression was performed to examine the relationship between the values of the COF and the SR. The value of the COF was identified as R²?≥?0.864. Statistical results, which are based on experimental measurements, show that rocks are classified according to their safe use areas depending on their COF and SR values.     

Combined steam-dry reforming of toluene in syngas over CaNiRu/Al2O3 catalysts

Cracking, steam reforming, dry reforming, and combined steam and dry reforming of toluene in model syngas were performed using catalysts to simulate tar removal produced during biomass gasification. The catalysts were prepared by adding Ru, Ca, and Mn to Ni-based catalysts, and their properties were measured using BET, pulse CO chemisorption, XRD and TG. In steam and dry reforming of toluene, a high toluene conversion was observed with increasing Ca content in the catalyst and catalysts containing Ca showed a higher activity than those containing Mn. In combined steam-dry reforming with syngas, 1%CaNiRu/Al₂O₃ indicated a conversion of 93.9% at 800°C.     

Stack gas dispersion measurements with Large Scale-PIV,Aspiration Probes and Light Scattering Techniques and comparison with CFD

The main purpose of this research is to manage simultaneous measurement of velocity and concentration in large cross-sections by recording and processing images of cloud structures to provide more detailed information for e.g. validation of CFD simulations. Dispersion from an isolated stack in an Atmospheric Boundary Layer (ABL) was chosen as the test case and investigated both experimentally and numerically in a wind tunnel. Large Scale-Particle Image Velocimetry (LS-PIV), which records cloud structures instead of individual particles, was used to obtain the velocity field in a vertical plane. The concentration field was determined by two methods: Aspiration Probe (AP) measurements and Light Scattering Technique (LST). In the latter approach, the same set of images used in the LS-PIV was employed. The test case was also simulated using the CFD solver FLUENT 6.3. Comparison between AP measurements and CFD revealed that there is good agreement when using a turbulent Schmidt number of 0.4. For the LST measurements, a non-linear relation between concentration and light intensity was observed and a hyperbolic-based function is proposed as correction function. After applying this correction function, a close agreement between CFD and LST measurements is obtained.     

Developing Alternative Forest Management Planning Strategies Incorporating Timber, Water and Carbon Values: An Examination of their Interactions

Currently, the integration of carbon and water values of forest ecosystems into forest management planning models has become increasingly important in sustainable forest management. This study focuses on developing a multiple-use forest management planning model to examine the interactions of timber and water production as well as net carbon sequestration in a forest ecosystem. Each forest value is functionally linked to stand structure and quantified economically. A number of forest management planning strategies varying in the amount of water, carbon, and timber targets and flows as constraints are developed and implemented in a linear programming (LP) environment. The outputs of each strategy are evaluated with a number of performance indicators such as standing timber volume, ending forest inventory, area harvested, and net present value (NPV) of water, timber, and carbon over time. Results showed that the cycling time of forest stands for renewal has important implications for timber, water, and carbon values. The management strategies indicated that net carbon sequestration can be attained at a significant cost in terms of foregone timber harvest and financial returns. The standing timber volumes and ending forest inventories were among the most important factors determining whether the forest constitutes a net carbon sink or source. Finally, the interactions among the forest values were generally found to be complementary, yet sometimes contradictory (i.e., negatively affecting each other), depending on the assumed relationship between forest values and stand structure.     

<Emphasis Type="Italic">Mesorhizobium</Emphasis> bacterial strains isolated from the legume <Emphasis Type="Italic">Lotus corniculatus</Emphasis> are an alternative source for the production of polyhydroxyalkanoates (PHAs) to obtain bioplastics

Polyhydroxyalkanoic acids (PHAs) are natural polyesters that can be used to produce bioplastics which are biodegradable. Numerous microorganisms accumulate PHAs as energy reserves. Combinations of different PHAs monomers lead to the production of bioplastics with very different properties. In the present work, we show the capability of strains belonging to various phylogenetic lineages within the genus Mesorhizobium, isolated from Lotus corniculatus nodules, to produce different PHA monomers. Among our strains, we found the production of 3-hydroxybutyrate, 3-hydroxyvalerate, 3-hydroxydodecanoate, and 3-hydroxyhexadecanoate. Most of the PHA-positive strains were phylogenetically related to the species M. jarvisii. However, our findings suggest that the ability to produce different monomers forming PHAs is strain-dependent.     

Performance of mixed algae for treatment of slaughterhouse wastewater and microbial community analysis

This study investigated organic matter (OM) and nutrient removal efficiency of mixed algal species from slaughterhouse wastewater (SWW) by using photo-bioreactor. For this purpose, different dilution multiples of 10, 4, and 2 were applied to the SWW, and pure wastewater was finally used for algal cultivation. OM and nutrient removal performance in an algal photo-bioreactor were severely affected by the dilution ratio. After 7 days of cultivation, the highest removal percentages of total organic carbon (TOC), total nitrogen (TN), and total phosphorus (TP) were 89.6, 70.2, and 96.2 %, respectively. Furthermore, the changes in eukaryotic algae and cyanobacterial species in the algal photo-bioreactors were investigated using polymerase chain reaction (PCR) and denaturing gradient gel electrophoresis (DGGE) techniques. The results indicated that cyanobacterial species were more efficient than eukaryotic species in removing nutrients from the SWW. This study suggests that mixed algal photo-bioreactors could be used efficiently in the treatment of SWW.

     

Carbon mineralization,microbial activity and metal dynamics in tailing ponds amended with pig slurry and marble waste

A field experiment was set up in Cartagena-La Unión Mining District, SE Spain, aimed at evaluating the short-term effects of pig slurry (PS) amendment alone and together with marble waste (MW) on organic matter mineralization, microbial activity and stabilization of heavy metals in two tailing ponds. These structures pose environmental risk owing to high metals contents, low organic matter and nutrients, and null vegetation. Carbon mineralization, exchangeable metals and microbiological properties were monitored during 67 d. The application of amendments led to a rapid decrease of exchangeable metals concentrations, except for Cu, with decreases up to 98%, 75% and 97% for Cd, Pb and Zn, respectively. The combined addition of MW + PS was the treatment with greater reduction in metals concentrations. The addition of PS caused a significant increase in respiration rates, although in MW + PS plots respiration was lower than in PS plots. The mineralized C from the pig slurry was low, approximately 25–30% and 4–12% for PS and MW + PS treatments, respectively. Soluble carbon (Csol), microbial biomass carbon (MBC) and β-galactosidase and β-glucosidase activities increased after the application of the organic amendment. However, after 3 d these parameters started a decreasing trend reaching similar values than control from approximately day 25 for Csol and MBC. The PS treatment promoted highest values in enzyme activities, which remained high upon time. Arylesterase activity increased in the MW + PS treatment. Thus, the remediation techniques used improved soil microbiological status and reduced metal availability. The combined application of PS + MW reduced the degradability of the organic compounds.     

Estimation and uncertainty analysis of groundwater quality parameters in a coastal aquifer under seawater intrusion: a comparative study of deep learning and classic machine learning methods

Environmental Science and Pollution Research - Excessive withdrawal of groundwater for agricultural irrigation can cause seawater intrusion into coastal aquifers. Such a case will in turn results...     

Validation of a questionnaire about the perception of occupational biohazard in Spanish companies

Objectives. The aim of this work was to develop, validate and test a new questionnaire to assess the biological risk in workers with intentional or unintentional exposure to biological agents. Methods. A questionnaire including 34 questions was developed to study the perception of workers against occupational biohazard. Content Validity Index (CVI) and Content Validity Ratio (CVR) were calculated for the analysis of content validity. A pilot study was carried out with 60 workers from 17 companies performing analysis of Cronbach's α to assess the internal consistency or reliability. Results. A total of 518 workers from 51 Spanish companies in which there is exposure to biological agents participated in the study yielding a response rate of 90%. The final questionnaire obtained a Cronbach's α > 0.759 with a stable test–retest result. The questionnaire validation demonstrates that it could be used to evaluate the biological risks and help the prevention of occupational accidents and diseases. Discussion. This study has validated the need to evaluate worker's perception against occupational risks, as well as the application of prevention methods and protective equipment. It is a first step towards developing an occupational biohazards assessment method including all the requirements set by the European Health and Safety Strategy 2013–2020.