Thermal,Rheological, Mechanical and Morphological Behavior of High Density Polyethylene and Carboxymethyl Cellulose Blend

In this study water soluble sodium carboxymethyl cellulose (CMC) was blended with high density polyethylene (HDPE) by peroxide-initiated melt compounding technique. The compatibility of the blended polymers were carried out by silane crosslinking agent. A series of blends were prepared by varying the CMC contents up to a maximum of 50 phr. The physical properties of non-crosslinked and crosslinked blends were investigated in detail. FTIR analysis of crosslinked blend confirmed the presence of Si–O–Si and Si–O–C absorption peaks at 1050 and 1159 cm^?1. Thermal stability of crosslinked blends improved as compared to its non-crosslinked congener. Rheological study of crosslinked blends illustrated high complex viscosity and dynamic shear storage modulus. The tensile strength of virgin polyethylene was 8.1 MPa whereas the maximum tensile strength of 19.6 MPa was observed in crosslinked blend. Similarly lower deformation was observed in crosslinked blends under static load. Scanning electron microscopy of crosslinked formulations also showed strong adhesion between the polymers interface. The compatibility of HDPE and CMC is attributed to both free radical and condensation reactions.     

The occurrence of lithium in the environment of the Jordan Valley and its transfer into the food chain

Lithium is found in trace amounts in all soils. It is also found in plants and in nearly all the organs of the human body. Low Li intake can cause behavioral defects. Thus, this study was conducted to investigate the concentration and distribution of water-soluble Li in soils of the Jordan Valley and its concentration in citrus trees and some important food crops in view of the significant implications of Li for human health. The concentration of soluble Li was measured in 180 soil samples collected at two depths (0–20 and 20–40 cm) whereas its content was determined in fully expanded leaves collected from citrus and different vegetable crops. Concentrations of soluble Li in soils vary from 0.95 to 1.04 mg l⁻¹ in topsoil and from 1.06 to 2.68 mg l⁻¹ in subsoil, while Li concentration in leaves ranged from 2 to 27 mg kg⁻¹ DM. Lithium concentrations in leaves of crops of the same family or different families vary with location in the valley; i.e., they decreased from north to south. It is concluded that soluble Li in soils and the plant family did not solely affect Li transfer in the food chain. In addition, soil EC, Ca, Mg, and Cl, which increased from north to south, might adversely affect plant Li uptake. The current study also showed that consuming 250–300 g FW of spinach day⁻¹ per person is recommended to provide consumers with their daily Li requirement necessary for significant health and societal benefits.     

A study on the environmental and economic aspects of aircraft emissions at the Antalya International Airport

Environmental Science and Pollution Research - In the last decade, aircraft-induced environmental issues have attracted much research interest. In addition to studies on performance related...     

Exploring the energy-environment growth nexus in francophone Africa in presence of institutions

Environment, Development and Sustainability - This paper analyses the role of renewable energy, ecological footprint and institutions on economic growth (measured by per capita GDP) in Francophone...     

Effect of shape of nanoparticle on heat transfer and entropy generation of nanofluid-jet impingement cooling

ABSTRACT

Al₂O₃/water nanofluid has been numerically examined for the first time with different nanoparticle shapes including, cylindrical, blade, brick, platelet and spherical, on the flat and triangular-corrugated impinging surfaces. The volume fractions of 1.0%, 2.0% and 3.0% nanoparticles have been used. The Reynolds number is between 100–500 depending on the slot diameter. The finite volume method is utilized to determine the governing equations. The study is analyzed to determine how the flow features, heat transfer features and entropy production were affected by the diversity of nanoparticle shape, nanoparticle volume fraction, and shape of impinging surface. Darcy friction factor and Nusselt number are studied in detail for different conditions. The temperature contours are presented in the case of different nanoparticle volume fractions, nanoparticle shapes and both impinging surfaces. The results of the study suggest that the nanoparticle shape of the platelet shows the highest heat transfer development due to the thinner thermal boundary layer. Heat transfer augments with increasing volume fraction of nanoparticles. In addition, the study is consistent with the results of the literature on heat transfer and flow properties.     

Comparison of heavy metal levels of farmed and escaped farmed rainbow trout and health risk assessment associated with their consumption

Environmental Science and Pollution Research - In this study, levels of ten metals (arsenic, cadmium, cobalt, chromium, copper, iron, manganese, nickel, lead, and zinc) in muscles of farmed and...     

Detecting micronuclei frequency in some aquatic organisms for monitoring pollution of Izmir Bay (Western Turkey)

Micronuclei tests is a system of mutagenicity testing used for determining the pollution and chemicals causing changes in DNA fragments such as micronuclei in the cytoplasm of interphase cells. Damage caused on the DNA by genotoxic pollutants is the first consequence occurring in the aquatic organisms. Thus, it was attempted to determine whether pollution affected the erythrocytes and gills of fish Gobius niger and haemolymph and gills of mussels Mytilus galloprovincialis living in Izmir Bay at the level of DNA by the means of micronuclei (MN) test. Organisms used in the MN test were collected from seven locations (Alsancak, Alaybey Shipyard, Karsiyaka, Bostanli, Göztepe, Konak and Pasaport) which are known as the most polluted part of inner Bay of Izmir (Western Coast of Turkey). According to the results of the present study, frequency of MN was found at high level in Alaybey Shipyard and Pasaport where wastes from existing dockyard contributed to high level of pollution. In conclusion, this study indicates that the micronuclei test gives sensitive results in monitoring the pollution, especially the pollution of harbor, and thus it might be used as standard method in regular monitoring of pollution of coastal ecosystem.     

Re-usage of waste foundry sand in high-strength concrete

In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is directly related to waste foundry inclusion in concrete. Nevertheless the concrete with 10% waste foundry sand exhibits almost similar results to that of the control one. The slump and the workability of the fresh concrete decreases with the increase of the waste foundry sand ratio. Although the freezing and thawing significantly reduces the mechanical and physical properties of the concrete. The obtained results satisfies the acceptable limits set by the American Concrete Institute (ACI).     

Levels of heavy metals in blue whiting caught from the eastern Black Sea area of Turkey

This paper presents data on the concentrations of 5 metals, copper (Cu), cadmium (Cd), iron (Fe), zinc (Zn) and lead (Pb) in Blue Whiting sampled from the Eastern Black Sea coast of Turkey. The highest metal concentrations of Cu, Cd, Fe, Zn and Pb were recorded in Blue Whiting with the values of 2.71, 0.601, 14.137, 15.322 and 1.078 μg g^‐1 dry weight, respectively. On average the metal concentrations in Blue Whiting followed the order of Zn > Fe > Cu > Pb > Cd. Temporal differences of concentrations of these metals were significant (p < 0.05). Spatial fluctuations of Cu, Cd, Fe, Zn and Pb concentrations in Blue Whiting were also significant (p < 0.01). It was found that the concentrations of Cu, Cd, Fe, Zn and Pb in the muscle in Blue Whiting were below the limit of Public Health Regulation in Turkey.     

Seasonal variation of some heavy metal pollution with environmental and microbiological parameters in sub-basin of Kocabas Stream (Biga, Canakkale, Turkey) by ICP-AES

Waste water pollution in industrial areas is one of the most important environmental problems. Heavy metal pollution, especially chromium species in waste water sources from tannery affects our lives. Kocabas Stream is located in south-west Marmara region and Biga town is positioned in the sub basin on the stream. This water source functions as the water for irrigation in agriculture, drinking water for animals and for human use. Thus, this study is of great importance. Waste water pollution can affect all ecosystems and human health by directly or indirectly as in food chain. The concentration of heavy metals (Pb, Cd, Cu, Zn and Cr) were pre-analysed by ICP-AES method in water samples taken from sub-basin of Kocabas stream. In the results of these analyses, concentrations of the metals except chromium were founded at the limit value. But the total concentration of the Cr was found at high levels of between 0.0082 +/- 0.0001 and 5.7231 +/- 0.0921 mg l(-1) over the limit value (0.05 mg l(-1); WHO, EPA, TSE 266 and inland water quality classification) at sampling points very close to tannery factories. Also physicochemical and microbiological parameters of Kocabas Stream were determined. The effects of the experimental results on environment were investigated.