Direct measurement of fugitive emissions of hydrocarbons from a refinery

Refineries are a source of emissions of volatile hydrocarbons that contribute to the formation of smog and ozone. Fugitive emissions of hydrocarbons are difficult to measure and quantify. Currently these emissions are estimated based on standard emission factors for the type and use of equipment installed. Differential absorption light detection and ranging (DIAL) can remotely measure concentration profiles of hydrocarbons in the atmosphere up to several hundred meters from the instrument. When combined with wind speed and direction, downwind vertical DIAL scans can be used to calculate mass fluxes of the measured gas leaving the site. Using a mobile DIAL unit, a survey was completed at a Canadian refinery to quantify fugitive emissions of methane, C2+ hydrocarbons, and benzene and to apportion the hydrocarbon emissions to the various areas of the refinery. Refinery fugitive emissions as measured with DIAL during this demonstration study were 1240 kg/hr of C2+ hydrocarbons, 300 kg/hr of methane, and 5 kg/hr of benzene. Storage tanks accounted for over 50% of the total emissions of C2+ hydrocarbons and benzene. The coker area and cooling towers were also significant sources. The C2+ hydrocarbons emissions measured during the demonstration amounted to 0.17% of the mass of the refinery hydrocarbon throughput for that period. If the same loss were repeated throughout the year, the lost product would represent a value of US$3.1 million/yr (assuming US$40/bbl). The DIAL-measured hourly emissions of C2+ hydrocarbons were 15 times higher than the emission factor estimates and gave a different perspective on which areas of the refinery were the main source of emissions. Methods, such as DIAL, that can directly measure fugitive emissions would improve the effectiveness of efforts to reduce emissions, quantify the reduction in emissions, and improve the accuracy of emissions data that are reported to regulators and the public.     

The potential for aeration of MSW landfills to accelerate completion

Landfilling is a popular waste disposal method, but, as it is practised currently, it is fundamentally unsustainable. The low short-term financial costs belie the potential long-term environmental costs, and traditional landfill sites require long-term management in order to mitigate any possible environmental damage. Old landfill sites might require aftercare for decades or even centuries, and in some cases remediation may be necessary. Biological stabilisation of a landfill is the key issue; completion criteria provide a yardstick by which the success of any new technology may be measured. In order for a site to achieve completion it must pose no risk to human health or the environment, meaning that attenuation of any emissions from the site must occur within the local environment without causing harm. Remediation of old landfill sites by aerating the waste has been undertaken in Germany, the United States, Italy and The Netherlands, with considerable success. At a pilot scale, aeration has also been used in newly emplaced waste to accelerate stabilisation. This paper reviews the use of aerobic landfill worldwide, and assesses the ways in which the use of aerobic landfill techniques can decrease the risks associated with current landfill practices, making landfill a more sustainable waste disposal option. It focuses on assessing ways to utilise aeration to enhance stabilisation. The results demonstrated that aeration of old landfill sites may be an efficient and cost-effective method of remediation and allow the date of completion to be brought forward by decades. Similarly, aeration of newly emplaced waste can be effective in enhancing degradation, assisting with completion and reducing environmental risks. However, further research is required to establish what procedure for adding air to a landfill would be most suitable for the UK and to investigate new risks that may arise, such as the possible emission of non-methane organic compounds.     

多氯联苯降解菌Pcb6所含质粒的某些特性的研究

研究证明,某些土壤微生物可以分解多氯联苯(PCBs)。笔者也曾报道过几株能够降解PCBs的细菌。细菌降解质粒可赋予细菌分解代谢各种复杂有机化合物的能力。Kamp和Furukawa等曾分别发现了能够将4-氯联苯和3,5-二氯联苯转化成对应的氯苯甲酸的质粒。 Pseudo monas.sp.Pcb6是一株含有质粒的PCBs降解菌,它对4-PCB、PCB-42、PCB-48和Aroclor1254降解效果显著,并具有明显的脱氯作用。本实验对该质粒的某些生物学特性进行了研究。     

Proposal for a Transatlantic Platform for Consumer Concerns and International Trade

Consumer concerns pop up. They are relatedto the safety of agrifood products for people, foranimals, and for the environment as well as the socialand ethical implications of certain agrifoodproduction methods. At first sight, the WTO agreementand the SPS and TBT agreements appear to offersufficient legal scope to deal with these concerns andresolve trade conflicts. The events of recent years,however, have shown the limitations of theseagreements in dealing with cultural differencesbetween nations and in dealing with the social andpolitical pressure on national governments to lay downrestrictive, trade distorting measures. It is vitalthat we consider the dynamic relationship betweennational governments, civil society, and the market.In the United States, Canada, and Europe, thisrealization is growing. We propose that these issuesshould be studied by experts in several disciplines:technical experts, hygiene experts and veterinarians,public administration experts, lawyers, philosophers,ethicists, sociologists, and, of course, economists.To unite these disciplines and provide a platform fordiscussion in the light of international tradeliberalisation, the cultural identity of distinctcommunities, and the functioning of the democraticnation state an international network is needed. Wetherefore propose establishing a network to explorethe issues and dynamics described above. The networkshould be international and interdisciplinary withparticipants, initially, from science and government.The purpose of the network would be to present newperspectives to the negotiating parties in the nextWTO round. The first steps to development of thisnetwork have since been taken and an initial group hasbeen established.     

Seasonal density dependence, timing of mortality, and sustainable harvesting

Birth-pulse populations are often characterized with discrete-time models, that use a single function to relate the post-breeding population size to the post-breeding size of the previous year. Recently, models of seasonal density dependence have been constructed that emphasize interactions during shorter time periods also. Here, we study two very simple forms of density-dependent mortality, that lead to Ricker and Beverton-Holt type population dynamics when viewed over the whole year. We explore the consequences of harvest timing to equilibrium population sizes under such density dependence. Whether or not individual mortality compensates for the harvested quota, the timing of harvesting has a strong impact on the sustainability of a harvesting quota. Further, we show that careless discretization of a continuous mortality scheme may seriously underestimate the reduction in population size caused by hunting and overestimate the sustainable yield. We also introduce the concept of the demographic value of an individual, which reflects the expected contribution to population size over time in the presence of density dependence. Finally, we discuss the possibility of calculating demographic values as means of optimizing harvest strategies. Here, a Pareto optimal harvest strategy will minimize the loss of demographic value from the population for a given yield.     

Developmental dental defects in children exposed to PCBs in eastern Slovakia

The effects of long-term exposure to polychlorinated biphenyls (PCBs) on developmental dental defects of deciduous and permanent teeth in children in eastern Slovakia, where PCBs from a chemical plant manufacturing Delors contaminated the surrounding district were evaluated. Four hundred and thirtytwo children, lifelong residents, aged 8-9 years were examined. Children's caries susceptibility and gingival health was assessed by standard dental indices, and developmental enamel defects by the FDI index. Data from the PCBRISK project data set and questionnaires completed by the parents provided information on exposure and various confounding factors. The proportion of teeth with different types and extensions of developmental enamel defects correlated with serum PCB concentration. The proportion of deciduous teeth affected with enamel defects was significantly higher in higher exposed children (chi(2)=8.35; p=0.03) according to their serum PCB concentration (group 0: <200; group 1: 200-600; group 2: >600 ng PCBs g(-1) serum lipids). The proportion of permanent teeth affected with any enamel defect was significantly higher in higher exposed children (chi2=7.237; p=0.027). Furthermore, the extent of the enamel defects was also greater (chi2=10.714; p=0.005). In multivariate linear regression analysis PCB exposure was significantly related to developmental enamel defects of permanent teeth only. No associations between PCB exposure and caries susceptibility, gingival health or number of teeth were observed. This study demonstrated a dose-response relationship between PCB exposure and developmental enamel defects of permanent teeth in children, the evidence for deciduous teeth was not conclusive.     

Microbial degradation pathways of the herbicide dichlobenil in soils with different history of dichlobenil-exposure

This is the first detailed study of metabolite production during degradation of the herbicide 2,6-dichlorobenzonitrile (dichlobenil). Degradation of dichlobenil and three potential metabolites: 2,6-dichlorobenzamide (BAM), 2,6-dichlorobenzoic acid (2,6-DCBA) and ortho-chlorobenzamide (OBAM) was studied in soils either previously exposed or not exposed to dichlobenil using a newly developed HPLC method. Dichlobenil was degraded in all four soils; BAM and 2,6-DCBA were only degraded in soils previously exposed to dichlobenil (100% within 35-56 days and 85-100% in 56 days, respectively), and OBAM in all four soils (25-33% removal in 48 days). BAM produced from dichlobenil was either hydrolyzed to 2,6-DCBA or dechlorinated to OBAM, which was further hydrolyzed to ortho-chlorobenzoic acid. BAM was rapidly mineralized in previously exposed soils only. All potential metabolites and the finding that BAM was a dead-end metabolite of dichlobenil in soils not previously exposed to dichlobenil needs to be included in risk assessments of the use of dichlobenil.     

Bendiocarbamate induced structural alterations in rabbit thymus after experimental peroral administration

In this study histological structure of rabbit thymus after bendiocarbamate (2,3-isopropyledene-dioxyphenyl methylcarbamate) administration was studied. Bendiocarbamate was perorally administered for 90 days. At Day 3, 10, 20, 30, 60, 90 morphometric analysis was realized. Quantitative evaluation showed that in the control group thymus cortex forms 57.94 +/- 7.10% and medulla 35.94+/- 7.38%. In almost all experimental groups significantly higher relative volume of cortex and lower relative volume of medulla was detected. Detail morphometric analysis found that the number of thymocytes per constant area and the diameter of tymocytes was decresed after bendiocarbamate administration. The number and diameter of reticular cells was not affected. Results of this study suggest negative effect of bendiocarbamate on the formation of thymus structures.     

Impacts of eutrophication on diatom life forms and species richness in coastal waters of the Baltic Sea

Increased nutrient and sediment loading can affect the functioning and biodiversity of coastal ecosystems. Lacking long-term monitoring data, paleolimnological techniques enable the estimation of habitat and diversity change through time. Using these methods we assessed the effects of eutrophication on diatom community structure and species richness over the past ca. 200 years in coastal waters of the Gulf of Finland. The abundance of planktonic diatoms has increased markedly because of increased eutrophication and turbidity. The loss of benthic habitats resulted in a clear decrease in diatom species richness after a threshold of 400-600 microg L(-1) total dissolved nitrogen; no unimodal pattern between diversity and productivity was observed in our data. The urban sites displayed a marked decrease in species richness starting in the late 19th century with increased urbanization. A clear recovery was visible after the cessation of point source loading by the mid-1980s at two sites, whereas at the third site no recovery was detected because of diffuse loading from the large catchment. Changes in the rural sites were minor and did not start until the 1940s.     

Geochemical position of Pb,Zn and Cd in soils near the Olkusz mine/smelter,South Poland: effects of land use,type of contamination and distance from pollution source

The soils adjacent to an area of historical mining, ore processing and smelting activities reflects the historical background and a mixing of recent contamination sources. The main anthropogenic sources of metals can be connected with historical and recent mine wastes, direct atmospheric deposition from mining and smelting processes and dust particles originating from open tailings ponds. Contaminated agriculture and forest soil samples with mining and smelting related pollutants were collected at different distances from the source of emission in the Pb–Zn–Ag mining area near Olkusz, Upper Silesia to (a) compare the chemical speciation of metals in agriculture and forest soils situated at the same distance from the point source of pollution (paired sampling design), (b) to evaluate the relationship between the distance from the polluter and the retention of the metals in the soil, (c) to describe mineralogy transformation of anthropogenic soil particles in the soils, and (d) to assess the effect of deposited fly ash vs. dumped mining/smelting waste on the mobility and bioavailability of metals in the soil. Forest soils are much more affected with smelting processes than agriculture soils. However, agriculture soils suffer from the downward metal migration more than the forest soils. The maximum concentrations of Pb, Zn, and Cd were detected in a forest soil profile near the smelter and reached about 25 g kg^− 1, 20 g kg^− 1 and 200 mg kg^− 1 for Pb, Zn and Cd, respectively. The metal pollutants from smelting processes are less stable under slightly alkaline soil pH then acidic due to the metal carbonates precipitation. Metal mobility ranges in the studied forest soils are as follows: Pb > Zn ≈ Cd for relatively circum-neutral soil pH (near the smelter), Cd > Zn > Pb for acidic soils (further from the smelter). Under relatively comparable pH conditions, the main soil properties influencing metal migration are total organic carbon and cation exchange capacity. The mobilization of Pb, Zn and Cd in soils depends on the persistence of the metal-containing particles in the atmosphere; the longer the time, the more abundant the stable forms. The dumped mining/smelting waste is less risk of easily mobilizable metal forms, however, downward metal migration especially due to the periodical leaching of the waste was observed.