Energy Supply Potentials and Needs, and the Environmental Impact of their Use in Sudan

Sudan is an agricultural country with fertile land, plenty of water resources, livestock, forestry resources, and agricultural residues. An overview of the energy situation in Sudan is introduced with reference to the end uses and regional distribution. Energy sources are divided into two main types; conventional energy (biomass, petroleum products, and electricity); and non-conventional energy (solar, wind, hydro-electricity, etc.). Sudan possesses a relatively high abundance of solar radiation, and moderate wind speeds, hydro, and biomass energy resources. The application of the new and renewable sources of energy available in Sudan is now a major issue in future energy strategic planning and for an alternative to fossil conventional energy. Sudan is an important case study in the context of renewable energy. It has a long history of meeting its energy needs through renewables. Sudan's renewables' portfolio is broad and diverse, due in part to the country's wide range of climates and landscapes. Like many of the African leaders in renewable energy utilization, Sudan has a well-defined commitment to continue research, development, and implementation of new technologies. Sustainable low-carbon energy scenarios for the new century emphasize the untapped potential of renewable resources. Rural areas of Sudan can benefit from this transition. The increased availability of reliable and efficient energy services stimulates new development alternatives. It is concluded that renewable, environmentally friendly, energy must be encouraged, promoted, invested, implemented, and demonstrated by full-scale plants, especially for use in the remote rural areas of Sudan.     

Quantitative Assessment of the Intertidal Environment of Kuwait II: Controlling Factors

Multivariate analysis of variance, canonical correlation and canonical discriminate analysis were performed on environmental data collected from the Kuwaiti intertidal zone to determine the statistical relationships between the sediment, chemical, biological, spatial and temporal variables. The quantitative analysis showed that the sediment type was the paramount factor influencing the distribution and composition of the intertidal benthic fauna. The muddy, sandy and rocky shores support three distinct faunal communities. The seasonal variation in the benthic fauna community was not statistically significant but variation in biological data due to differences in transect location and tidal level were significant. This spatial variation has been attributed to differences in sediment and substrate types. The physico-chemical parameters were found to correlate positively with the mud content of the sediments but were unimportant in the overall composition of the intertidal fauna. This paper complements the results reported in Al Bakriet al. (1997–Part I) in establishing a valuable benchmark for assessing environmental impacts and for developing sustainable coastal zone management in Kuwait. The integrated approach outlined here could be adopted to develop a sound basis for the protection and management of coastal environments and resources in similar areas.     

FLOOD CONTROL RESERVOIR OPERATIONS UNDER ENVIRONMENTAL RESTRAINTS1

ABSTRACT: A flood control reservoir protects valuable developments on the downstream flood plain by storing flood waters and releasing them at a rate that will reduce the downstream damage. The water surface level of the flood pool behind the dam can fluctuate considerably during the occurrence of a large magnitude flood causing the inundation of trees, low vegetation, and water based recreation facilities located in those areas of the flood pool area that are normally well above the water level. The amount of damage that will occur in the upper levels of the flood storage area will depend on the depth and duration of the inundation that occurs. This, in turn, is directly related to the operating policy for the reservoir. A dynamic programming optimization model of flood control reservoir operation is presented. This model determines the reservoir operating schedule that minimizes downstream flood damages. Various constraints are added to the model to account for the environmental impacts of long periods of flood storage.     

UTILIZATION OF MODELS IN WATER RESOURCES1

ABSTRACT: A 1984 survey of water resources personnel was conducted to determine the current and future uses of mathematical models in planning, design and operations of water resources systems. Eighty-six percent of those responding indicated they have used mathematical models in the last year. Lack of appropriate data, inadequate time and funding to do the modeling and lack of models that represent the “real world” situation were the most frequently mentioned constraints to model use. Microcomputers were seen as having a positive influence on mathematical model use in water resources.     

Prevalence and characteristics of road traffic injuries among young drivers in Oman, 2009–2011

Objectives: Studies from different parts of the world have indicated that the impact of road traffic incidents disproportionally affects young adults. Few known studies have been forthcoming from Arabian Gulf countries. Within Oman, a high proportion of the population is under the age of 20. Coupled with the drastic increase in motorization in recent years, there is a need to understand the state of road safety among young people in Oman. The current research aimed to explore the prevalence and characteristics of road traffic injuries among young drivers aged 17–25 years.

Methods: Crash data from 2009 to 2011 were extracted from the Directorate General of Traffic, Royal Oman Police (ROP) database in Oman. The data were analyzed to explore the impact of road crashes on young people (17–25 years), the characteristics of young driver crashes, and how these differ from older drivers and to identify key predictors of fatalities in young driver crashes.

Results: Overall, young people were overrepresented in injuries and fatalities within the sample time period. Though it is true that many young people in crashes were driving at the time, it was also evident that young people were often victims in a crash caused by someone else. Thus, to reduce the impact of road crashes on young people, there is a need to generally address road safety within Oman. When young drivers were involved in crashes they were predominantly male. The types of crashes these drivers have can be broadly attributed to risk taking and inexperience. Speeding and nighttime driving were the key risk factors for fatalities.

Conclusion: The results highlight the need to address young driver safety in Oman. From these findings, the introduction of a graduated driver licensing system with nighttime driving restrictions could significantly improve young driver safety.     

An economic and environmental framework for analyzing globally sourced auto parts packaging system

Competitive forces are driving US domestic manufacturers to source parts globally, which significantly extends their supply chain and introduces new sustainability concerns. This paper addresses the situation from an operating division manager's perspective. We present an approach to packaging system assessment which considers the division manager's span of control, addresses the design of packaging and the corresponding logistics processes, and incorporates both cost and environmental impacts. A construct familiar to operations managers, the value stream map, is adapted to model material flow of both parts and packages, and an integrated material flow analysis is used as the common basis for cost analysis, a modified life cycle environmental impact analysis, and an energy consumption analysis. The framework is illustrated using a case study of a major US automaker.     

Solute Transport in Open-Channel Networks in Unsteady Flow Regime

In this paper we propose a robust algorithm to evaluate solute transport in open-channel networks with transient storage under an unsteady flow regime. In the proposed approach, through the integration of junction equations into the model and solving them explicitly, the analysis of solute transport problems in open-channel networks is simplified significantly. Furthermore, when coupled with a transient hydrodynamic open-channel network model for flow simulation, the proposed model can be utilized in the solution of solute transport problems under unsteady flow regimes. In the proposed model, the governing equations are written in a conservative form and are solved using a fractional-step algorithm, which is based on a relaxation and central difference scheme. The proposed algorithm is robust and accurate even for advection dominant cases. A pure advection with discontinuities, a field application and solute transport in an open-channel network in an unsteady flow regime are included, to demonstrate the performance of the proposed algorithm.     

Concentrations and gas/particle partitioning of PCBs in Chicago

Thirty seven air samples were collected in Chicago, IL from June to October 1995 and analyzed for gas and particle concentrations of polychlorinated biphenyls (PCBs). Lower molecular weight (MW) PCBs dominated the samples and on average 95% of the Sigma50PCB concentration (gas+particulate) was in the vapor phase. Sigma50PCB concentrations were classified based on prevailing winds (lake and land). The Sigma50PCB concentration varied between 0.42 and 5.21 ng/m3 (1.80+/-1.70 ng/m3) for lake and 0.53 and 8.31 ng/m3 (2.41+/-2.15 ng/m3) for land wind directions. Back trajectory analyses suggested that SW of Chicago can be an important local or regional source sector for PCBs. Partitioning between gas and particulate phases was modeled using the Junge-Pankow model. The measured particle phase concentrations for low MW PCBs were lower than those predicted by the model while the opposite was observed for high MW PCBs. Plots of gas/particle partition coefficient (log Kp) vs. subcooled liquid vapor pressure (log pL(0)) had reasonable correlations for individual samples but the slope varied among the samples. Samples that originated from over the lake had higher slopes than samples that originated from over the land.     

Determining particle size distributions in the inhalable size range for wood dust collected by air samplers

In the absence of methods for determining particle size distributions in the inhalable size range with good discrimination, the samples collected by personal air sampling devices can only be characterized by their total mass. This parameter gives no information regarding the size distribution of the aerosol or the size-selection characteristics of different samplers in field use conditions. A method is described where the particles collected by a sampler are removed, suspended, and re-deposited on a mixed cellulose-ester filter, and examined by optical microscopy to determine particle aerodynamic diameters. This method is particularly appropriate to wood dust particles which are generally large and close to rectangular prisms in shape. Over 200 wood dust samples have been collected in three different wood-products industries, using the traditional closed-face polystyrene/acrylonitrile cassette, the Institute of Occupational Medicine inhalable sampler, and the Button sampler developed by the University of Cincinnati. A portion of these samples has been analyzed to determine the limitations of this method. Extensive quality control measures are being developed to improve the robustness of the procedure, and preliminary results suggest the method has an accuracy similar to that required of National Institute for Occupational Safety and Health (NIOSH) methods. The results should provide valuable insights into the collection characteristics of the samplers and the impact of these characteristics on comparison of sampler results to present and potential future limit values. The NIOSH Deep South Education and Research Center has a focus on research into hazards of the forestry and associated wood-products industry, and it is hoped to expand this activity in the future.     

Nickel and Cadmium Concentrations in Plasma and Na+/K+ATPase Activities in Erythrocyte Membranes of the People Exposed to Cement Dust Emissions

The aim of this study was to determine the concentrations of nickel and cadmium in blood plasma of the people exposed to cement dust emissions and to investigate the effects of exposure period on the activities of Na⁺/K⁺ ATPase enzymes in their erythrocyte membranes. The study was carried out on people living in Eskiehir Çukurhisar rural area, located near a cement factory. Blood samples of the individuals residing in this area were taken from 80subjects (30 for control) following a physical examination. The analysis of plasma samples showed that nickel concentrations in subject group were found to be significantly higher than those of the control group (p < 0.001). Cadmium concentrations were found to be within the reference values for both group and no difference was found between the subjects and controls (p > 0.05). Furthermore, no correlation was observed between the levels of Na⁺/K⁺ ATPase activity in erythrocyte membranes of the subject group and the ages of people living in the region (p > 0.05, r = 0.133). It was also observed that nickel concentrations increased by age (p < 0.001, r = 0.646) while no effect was observed in means of cadmium. Na⁺/K⁺ ATPase activities in the erythrocyte membranes were not affected.In conclusion although there was no difference between the Na⁺/K⁺ ATPase activity in means of age, there was an environmental pollution and may be it was due to the industrial plant.