Sorption of As(V) ions by akaganéite-type nanocrystals

A priority pollution problem, the removal of arsenate oxyanions from dilute aqueous solutions by sorption onto synthetic akaganéite (beta-FeO(OH)) was the aim of the present study. This is an innovative inorganic adsorbent material prepared in the laboratory, following a new method of preparation. The effect of akaganéite and arsenate concentration, the contact time, temperature, solution pH value, and ionic strength variation on the treatment process was mainly investigated during this study. Typical adsorption isotherms were determined, which were found to fit sufficiently the typical Langmuir equation. The mechanism of sorption was examined by electrokinetic, X-ray diffraction, Fourier transmission infrared and scanning electron microscopy measurements. Promising results were obtained, due to the favourite characteristics of the adsorbent applied.     

Metal ion removal from water by sorption on paper mill sludge

Chromatographic columns packed with paper mill sludge are employed for metal ion recovery from water. The breakthrough curves show that cadmium, copper, lead and silver are removed from acid solutions (pH 2, 4); the affinity series is Pb(II)>Cu(II)>Ag(I)>Cd(II). Both the amount of metal retained and the metal-matrix interaction are pH dependent; the sorptive capacity increases with increasing pH. When the metals are present together at the same initial concentrations a competition among the different ions occurs although the affinity order remains unchanged. In metal recovery from the paper mill sludge column, the total amount of the cadmium and copper is displaced by HCl 1.0 M, 65% of the lead by HCl 0.1 M and 75% of the silver by HNO(3) 0.1 M. More than 95% of copper and lead and less than 20% of cadmium were recovered with HCl 0.1 M when the metals were present at the same time.     

Geochemical evidences of the anthropogenic alteration of trace metal composition of the sediments of Chiricahueto marsh (SE Gulf of California)

Seven sediment cores (60-80 cm) were collected at Chiricahueto marsh, a salt marsh influenced by agrochemical, domestic and industrial effluents. The concentrations of Ag, Al, Cd, Co, Cu, Fe, Li, Mn, Pb, V and Zn were studied in the solid phase at each 1-cm section. The profiles of Ag, Cd, Cu, Mn, Ni, Pb and Zn showed a slight recent pollution in the site with enrichment and anthropogenic factors higher than unity; and correlation analysis indicated a direct association with organic carbon. Al, Co, Cr, Fe, Li, and V concentration profiles displayed a negative correlation with organic C and positive with mud content and no consistent enrichment at surface. Based on the principal component analysis and correlation analysis, two principal groups of metals were identified. The first group includes Al, Co, Cr, Fe and Li, that are derived predominantly from the weathering of parent materials in the local bedrock; and the second group include most of the metals, which were relatively enriched at surficial sediments, that are produced mainly by anthropogenic activities such as agriculture (Cd, Cu and Zn), sewage effluents (Ag, Cd, Cu, Ni, Pb and Zn) and in lesser extent atmospheric deposition (Cd and Pb).     

Removal of biocide pentachlorophenol in water system by the spent mushroom compost of Pleurotus pulmonarius

Pentachlorophenol (PCP) has been widely used as a wood preservative since 1980s. Although it has been banned worldwide, residues of PCP are still commonly found. The spent compost of oyster mushroom Pleurotus pulmonarius (SMC) which was a degraded paddy straw-based substrate, contained 25% chitin. Five percentage of the SMC could remove 89.0 +/- 0.4% of 100 mg PCPl(-1) within 2 days at room temperature predominantly by biodegradation. The maximum removal capacity was 15.5 +/- 1.0 mg g(-1) SMC. The sorption kinetics of PCP by SMC can be described by the Freundlich monolayer model with a theoretical sorption capacity similar to that found for chitin. A PCP-degradative bacterium was isolated from the SMC. Yet, biodegradation was predominantly contributed by the immobilized ligninolytic enzymes secreted by the mushroom to the SMC. Degradation of PCP involves dechlorination, methylation, carboxylation and ring cleavage as verified by GC-MSD and ion chromatography. Thus, the SMC has a potential for treating PCP-contaminated water.     

Negative effects of humic acid addition on phytoremediation of pyrene-contaminated sediments by mangrove seedlings

Vegetated (with Kandelia candel seedlings) and non-vegetated mangrove microcosms were employed to remove pyrene from contaminated sediments, and the effects of adding 6.7% humic acid (HA) on such removal were investigated. At the end of 6-month treatment, residual pyrene concentrations in surface sediments (0-2 cm) of the contaminated microcosms reduced from an initial 5.82 to 0.63 microg g(-1) dw, and the reduction was less in HA amended microcosms with the residual pyrene concentration remained at 3.12 microg g(-1) dw. The pyrene removal percentages in microcosms with HA amendment were 29% for surface aerobic sediments and 41% for bottom (anaerobic) sediments, while the respective removal percentages in microcosms without HA amendment were 89% (surface sediments) and 53% (bottom sediments). Microcosms planted with K. candel seedlings had a significantly higher pyrene removal when compared to the non-vegetated ones, and the average removal percentages were 70.9% and 61.4%, respectively. However, when humic acid was added, no significant difference was found between vegetated and non-vegetated microcosms in pyrene removal, both had less than 40% removal, probably because plant growth in humic acid amended contaminated microcosms, in terms of total biomass, was reduced by 50%. Roots of K. candel could accumulate pyrene from contaminated microcosms, and pyrene concentrations in roots harvested from microcosms with and without humic acid addition were 6.01 and 3.46 microg g(-1) dw, respectively. These results suggest that the addition of HA to contaminated sediments decreased the mangrove microcosm's ability to remove pyrene as pyrene was more tightly bound to the organic matter and plant growth was reduced.     

Determination of microbiological contamination,antibacterial and antioxidant activities of natural plant hazelnut (Corylus avellana L.) pollen

The aim of our study is to determine microbial contamination, antibacterial and antioxidant activities of 14 pollen samples of Corylus avellana collected from different locations in Slovakia. Microbiological analysis was carried out in two steps: microbiological assays and studies of antibacterial activity of pollen extracts. The antimicrobial properties of pollen extracts were carried out with the disc-diffusion method. Methanol (70%), ethanol (70%) and distilled water were used for pollen extracts. Five strains of bacteria such as gram-negative (Salmonella enterica subsp. enterica CCM 3807, Escherichia coli CCM 2024, and Yersinia enterocolitica CCM 5671) and gram-positive (Staphylococcus aureus CCM 2461 and Bacillus thuringiensis CCM 19T) were tested. Antioxidant activity of pollen extracts was determined by the DPPH method. Bacterial analysis includes the determination of the total bacterial count ranged from 4.08 to 4.61 log CFU g^?1, mesophilic aerobic bacteria ranged from 3.40 to 4.89 log CFU g^?1, mesophilic anaerobic bacteria ranged from 3.20 to 4.52 log CFU g^?1, coliform bacteria ranged from 3.30 to 4.55 log CFU g^?1, yeasts and filamentous fungi ranged from 3.00 to 3.56 log CFU g^?1. Microscopic filamentous fungi Aspergillus spp., Alternaria spp., Penicillium spp., Cladosporium spp., Rhizopus spp., and Paecylomyces spp. were isolated from hazelnut pollen. Yersinia enterocolitica was the most sensitive strain among ethanolic and methanolic pollen hazelnut extracts. Staphylococcus aureus was the most sensitive strain against aqueous hazelnut pollen extracts. We determined the following sensitivity against ethanol pollen extracts respectively: Yersinia enterocolitica?>?Salmonella enterica?>?Staphylococcus aureus?>?Bacillus thuringiensis?>?Escherichia coli. Methanol pollen extracts had shown following sensitivity: Yersinia enterocolitica?>?Salmonella enterica?>?Escherichia coli?>?Staphylococcus aureus?>?Bacillus thuringiensis. Aqueous extracts had shown the following sensitivity: Staphylococcus aureus?>?Salmonella enterica?>?Escherichia coli?>?Bacillus thuringiensis?>?Yersinia enterocolitica. Hazelnut pollen extracts have over 82% antioxidant capacity in samples from non-urban zones. An elevated level of antioxidant potential in the pollen is determined by its biological properties conditioned by biologically active substances. DPPH method allowed characterizing pollen as a source of antioxidants.     

Forecasting model to assess the potential of secondary lead production from lead acid battery scrap

Environmental Science and Pollution Research - Lead acid battery (LAB) scrap management is an important issue both environmentally and economically. The recovery of lead from battery scrap leads to...     

Ovariectomy predisposes female rats to fine particulate matter exposure’s effects by altering metabolic,oxidative, pro-inflammatory,and heat-shock protein levels

Environmental Science and Pollution Research - The reduction of estrogen levels, as a result of menopause, is associated with the development of metabolic diseases caused by alterations in...     

Guarana improves behavior and inflammatory alterations triggered by methylmercury exposure: an in vivo fruit fly and in vitro neural cells study

Environmental Science and Pollution Research - Methylmercury (MeHg) is a well-known environmental pollutant associated with neurological and developmental deficits in animals and humans. However,...     

Predicting logP of pesticides using different software

We compared experimental and calculated logP values using a data set of 235 pesticides and experimental values from four different sources: The Pesticide Manual, Hansch Manual, ANPA and KowWin databases. LogP were calculated with four softwares: HyperChem, Pallas, KowWin and TOPKAT. Crossed comparison of the experimental and calculated values proved useful, especially for pesticides. These are harder to study than simpler organic compounds. Structurally they are complex, heterogeneous and similar to drugs from a chemical point of view. They offer an interesting way to verify the goodness of the different methods. Other studies compared several logP predictors using a single set of experimental values taken as a reference. Here we discuss the utility of the different logP predictors, with reference to experimental data found in different databases. This offers three advantages: (1) it avoids bias due to the assumption that one single data set is correct; (2) a given predictor can be developed on the same data set used for evaluation; (3) it takes account of experimental variability and can compare it with the predictor's variability. In our study Pallas and KowWin gave the best results for prediction, followed by TOPKAT.