An assessment of the chronic toxicity of the synthetic pyrethroid, fenvalerate, to Daphnia galeata mendotae, using life tables

The effects of chronic exposure to fenvalerate, a synthetic pyrethroid insecticide, on the cladoceran Daphnia galeata mendotae were evaluated under laboratory conditions. The daphnids were exposed for their entire life cycle to concentrations ranging from 0.005 to 0.1 microg fenvalerate litre(-1). The parameters used to determined toxicity were survival, time to first reproduction, reproductive frequency, number of young per brood, cumulative brood size, intrinsic rate of natural increase (r(m)), generation time (T) and net reproductive rate (R(0)). A concentration of 0.005 microg fenvalerate litre(-1) resulted in an increase in longevity but a decrease in production of young. Higher concentrations caused a decrease in survival. Studies of shorter duration than the complete life cycle of the organisms would not have detected toxicity at such low levels. The intrinsic rate of natural increase, r(m), was not affected by fenvalerate until concentration reached 0.05 microg litre(-1) and r(m) decreased to 0.113 from 0.238. A concentration of 0.01 microg litre(-1) caused the net reproductive rate, R(0), and the generation time, T, to decrease to 73.2 offspring per female and 17.3 days from 125.9 offspring per female and 20.3 days, respectively.     

Pt/Mg-Ce-O catalyst for NO/H<Subscript>2</Subscript>/O<Subscript>2</Subscript> lean de-No<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reaction

The NO/H₂/O₂ reaction was studied under oxidizing conditions in the 100-400 °C range over 0.1 wt% Pt supported on various metal oxides such as MgO, CeO₂, SiO₂, La₂O₃, CaO, Y₂O₃ and TiO₂. The Pt/MgO and Pt/CeO₂ catalysts showed good catalytic behaviours. Here, we find that the Pt/Mg-Ce-O catalyst, prepared from MgO and CeO₂ by the sol-gel method, is a very active and selective catalyst towards N₂ formation in the whole 100–400 °C range. This catalyst appears to be the most active, selective and stable one ever reported in the literature for the NO/H₂/O₂ reaction, even in the presence of 5%v H₂O or 20 ppmv of SO₂ in the feed stream.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organised by Dr. Branimir Jovancicevic.     

Deriving freshwater quality criteria for copper,cadmium, aluminum and manganese for protection of aquatic life in Malaysia

Freshwater quality criteria for copper (Cu), cadmium (Cd), aluminum (Al), and manganese (Mn) were developed with particular reference to aquatic biota in Malaysia, and based on USEPA’s guidelines. Acute toxicity tests were performed on eight different freshwater domestic species in Malaysia, which were Macrobrachium lanchesteri (prawn), two fish – Poecilia reticulata and Rasbora sumatrana, Melanoides tuberculata (snail), Stenocypris major (ostracod), Chironomus javanus (midge larvae), Nais elinguis (annelid), and Duttaphrynus melanostictus (tadpole), to determine 96-h LC50 values for Cu, Cd, Al, and Mn. The final acute values (FAVs) for Cu, Cd, Al, and Mn were 2.5, 3.0, 977.8, and 78.3 μg L^?1, respectively. Using an estimated acute-to-chronic ratio (ACR) of 8.3, the value for final chronic value (FCV) was derived. Based on FAV and FCV, a Criterion Maximum Concentration (CMC) and a criterion Continuous Concentration (CCC) for Cu, Cd, Al, and Mn of 1.3, 1.5, 488.9, and 39.1 μg L^?1 and 0.3, 0.36, 117.8, and 9.4 μg L^?1, respectively, were derived. The results of this study provide useful data for deriving national or local water quality criteria for Cu, Cd, Al, and Mn based on aquatic biota in Malaysia. Based on LC50 values, this study indicated that R. sumatrana, M. lanchesteri, C. javanus, and N. elinguis were the most sensitive to Cu, Cd, Al, and Mn, respectively.     

The effects of leachate recirculation with supplemental water addition on methane production and waste decomposition in a simulated tropical landfill

In order to increase methane production efficiency, leachate recirculation is applied in landfills to increase moisture content and circulate organic matter back into the landfill cell. In the case of tropical landfills, where high temperature and evaporation occurs, leachate recirculation may not be enough to maintain the moisture content, therefore supplemental water addition into the cell is an option that could help stabilize moisture levels as well as stimulate biological activity. The objectives of this study were to determine the effects of leachate recirculation and supplemental water addition on municipal solid waste decomposition and methane production in three anaerobic digestion reactors. Anaerobic digestion with leachate recirculation and supplemental water addition showed the highest performance in terms of cumulative methane production and the stabilization period time required. It produced an accumulated methane production of 54.87 l/kg dry weight of MSW at an average rate of 0.58 l/kg dry weight/d and reached the stabilization phase on day 180. The leachate recirculation reactor provided 17.04 l/kg dry weight at a rate of 0.14l/kg dry weight/d and reached the stabilization phase on day 290. The control reactor provided 9.02 l/kg dry weight at a rate of 0.10 l/kg dry weight/d, and reached the stabilization phase on day 270. Increasing the organic loading rate (OLR) after the waste had reached the stabilization phase made it possible to increase the methane content of the gas, the methane production rate, and the COD removal. Comparison of the reactors' efficiencies at maximum OLR (5 kgCOD/m(3)/d) in terms of the methane production rate showed that the reactor using leachate recirculation with supplemental water addition still gave the highest performance (1.56 l/kg dry weight/d), whereas the leachate recirculation reactor and the control reactor provided 0.69 l/kg dry weight/d and 0.43 l/kg dry weight/d, respectively. However, when considering methane composition (average 63.09%) and COD removal (average 90.60%), slight differences were found among these three reactors.     

LEAST COST SOLUTIONS TO THE PROBLEM OF EFFLUENT ABATEMENT IN URBAN SYSTEMS1

ABSTRACT: There is a significant misallocation of resources in the construction and operation of municipal sewage treatment systems in North America. Central to this misallocation is the inadequate evaluation of alternative treatment technologies, alternative distributions of responsibility for waste treatment, and alternative mechanisms for inducing compliance with treatment system requirements. Perverse incentives in the current institutional structure limit the scope of alternatives examined by decisionmakers. Determination of the least cost solution to the problem of urban effluent abatement requires mathematical modeling for the delineation of optimal treatment strategies on a system wide basis. The adoption of modern methods of systems analysis can identify significant opportunities for the reduction of economic waste in the treatment of municipal sewage.     

Treatment of organic aqueous wastes: Wet air oxidation and Wet Peroxide Oxidation

There is growing concern about the problems of waste elimination. We should consider our environment as being borrowed from future generations and refrain from leaving a legacy of problems we are not able to solve. Various oxidation techniques are suited for the elimination of organic aqueous wastes, but because of the environmental drawbacks of incineration, enclosed processes, like liquid phase oxidation should be preferred. Wet air oxidation (WAO) under high temperature (200-325 degrees C) and pressure (50-150 bar) is suited to such liquid wastes and various catalysts, including hydrogen peroxide, can be used in order to increase the efficiency without increasing temperature and pressure. Wet Peroxide Oxidation (WPO) is a similar process. A comparable oxidation efficiency is obtained when using hydrogen peroxide as the oxidising agent instead of oxygen, at a temperature of only 100-120 degrees C. As opposed to WAO, which is capital intensive, WPO needs limited capital but generates higher running costs. The paper reviews the major results obtained for both processes and assesses the field of possible application of each of them. TOC removal efficiencies typically obtained range from 65 to 90% or more for most of the pollutants.     

Processing and Properties of Biopolymer/Polyhydroxyalkanoates Blends

In this paper, the processability and the performance of a biodegradable polymer, Mater-Bi, and of its blends with either a sample of poly (hydroxy alkanoates) (PHA) or with bacterial biomass containing PHAs were compared. Adding PHA or directly the biomass containing it allows improving the processability of the matrix. Moreover, the mechanical behaviour of the systems was compared considering two different preparation methods, namely compression and injection moulding. The injection moulded samples show poorer mechanical performances than those of the compression moulded systems. The impact strength significantly improves when PHA is added while it reduces when bacterial biomass is used instead. In this latter case this was likely due to the easier propagation of micro-cracks during the impact tests.     

Conceptualizing and communicating management effects on forest water quality

We present a framework for evaluating and communicating effects of human activity on water quality in managed forests. The framework is based on the following processes: atmospheric deposition, weathering, accumulation, recirculation and flux. Impairments to water quality are characterized in terms of their extent, longevity and frequency. Impacts are communicated using a “traffic lights” metaphor for characterizing severity of water quality impairments arising from forestry and other anthropogenic pressures. The most serious impairments to water quality in managed boreal forests include (i) forestry activities causing excessive sediment mobilization and extirpation of aquatic species and (ii) other anthropogenic pressures caused by long-range transport of mercury and acidifying pollutants. The framework and tool presented here can help evaluate, summarize and communicate the most important issues in circumstances where land management and other anthropogenic pressures combine to impair water quality and may also assist in implementing the “polluter pays” principle.