Is the degrowth debate relevant to China?

In industrialized countries, the idea of degrowth has emerged as a response to environmental, social, and economic crises. Realizing environmental limits to and failures of more than half a century of continual economic growth in terms of social progress and environmental sustainability, the degrowth paradigm calls for a downscaling of consumption and production for social equity and ecological sustainability. The call for economic degrowth is generally considered to be delimited to rich countries, where reduced consumption can save “ecological space” enabling people in poor countries to enjoy the benefits of economic growth. China, as one of the economically most expanding countries in the world, has dramatically improved its living standards, particularly along the Eastern coast, over the latest 30 years. However, China is absent from the international debates on growth. This article discusses the implications of the Western degrowth debates for China. Given the distinctive features of China’s development, the paper aims to enrich the degrowth debates, which have hitherto been dominated by Western perspectives. Based upon reflections on social, environmental, and moral dimensions of economic growth, the paper argues that limited natural resources may not continuously support universal affluence at the current level of the rich countries, a level that China is likely to reach within a few decades. Priority for growth in China should therefore be given to the poor regions of the country, and future growth should be beneficial to social and environmental development.     

Effect of anthropogenic pollution on oxidative processes in the liver of fish from the Rybinsk Reservoir

The levels of total lipids, peroxidation products, and antioxidant activity in the liver were studied in fish species living in unequally polluted areas of the Rybinsk Reservoir and differing in their ecology and taxonomic position: the bream (Abramis brama L.), roach (Rutilus rutilus L.), burbot (Lota lota L.), and zander (Stizostedion lucioperca L.). The fish from polluted water areas were characterized by higher levels of total lipids and malonic dialdehyde and a deficiency of antioxidants. It is shown that the test parameters depend on the type of feeding and mode of life of the fish species.     

Nematode species at risk--a metric to assess pollution in soft sediments of freshwaters

Soft sediments are often highly polluted as many of the toxic chemicals introduced into surface waters bind to settling particles. The resulting accumulation of pollutants in the sediments poses a risk for benthic communities. However, pollution induced changes in benthic communities have been difficult to determine when using macro-invertebrates as bioindicators, as these organisms are often absent in soft sediment. The present study therefore examined the ability of meiofaunal organisms, specifically, nematodes, to assess the ecological status of soft sediments. Over a 9-year period, nematode communities present in sediments collected from large rivers and lake Constance in Germany were studied. These sediments showed a large range of physico-chemical properties and anthropogenic contamination. After the degree of metal and organic contamination was translated into ecotoxicologically more relevant toxic units (TUs), multivariate methods were used to classify nematode taxa in species at risk (NemaSPEAR) or not at risk (NemaSPE(not)AR). This approach clearly distinguished the influence of sediment texture from that of the toxic potential of the samples and thus allowed classification of the nematode species according to their sensitivity to or tolerance of toxic stress. Two indices, expressing the proportion of species at risk within a sample (NemaSPEAR[%](metal), NemaSPEAR[%](organic)), were calculated from independent data sets obtained in field and experimental studies and showed good correlations with the toxic potential (field data) or chemical concentrations (microcosm data). NemaSPEAR[%] indices for metal and organic pollution were therefore judged to be suitable for assessing the impact of chemical contamination of freshwater soft sediments.     

Estimating sediment and caesium-137 fluxes in the Ribble Estuary through time-series airborne remote sensing

High spatial and temporal resolution airborne imagery were acquired for the Ribble Estuary, North West England in 1997 and 2003, to assess the application of time-series airborne remote sensing to quantify total suspended sediment and radionuclide fluxes during a flood and ebb tide sequence. Concomitant measurements of suspended particulate matter (SPM) and water column turbidity were obtained during the time-series image acquisition for the flood and ebb tide sequence on the 17th July 2003 to verify the assumption of a vertically well mixed estuary and thus justifying the vertical extrapolation of spatially integrated estimate of surface SPM. The ¹³⁷Cs activity concentrations were calculated from a relatively stable relationship between SPM and ¹³⁷Cs for the Ribble Estuary. Total estuary wide budgets of sediment and ¹³⁷Cs were obtained by combining the image-derived estimates of surface SPM and ¹³⁷Cs with estimates of water volume from a two-dimensional hydrodynamic model (VERSE) developed for the Ribble Estuary. These indicate that around 10,000 tonnes of sediment and 2.72 GBq of ¹³⁷Cs were deposited over the tidal sequence monitored in July 2003. This compared favourably with bed height elevation change estimated from field work. An uncertainty analysis on the total sediment and ¹³⁷Cs flux yielded a total budget of the order of 40% on the final estimate. The results represent a novel approach to providing a spatially integrated estimate of the total net sediment and radionuclide flux in an intertidal environment over a flood and ebb tide sequence.     

Evaluating and reducing a model of radiocaesium soil-plant uptake

An existing model of radiocaesium transfer to grasses was extended to include wheat and barley and parameterised using data from a wide range of soils and contact times. The model structure was revised and evaluated using a subset of the available data which was not used for model parameterisation. The resulting model was then used as a basis for systematic model reduction to test the utility of the model components. This analysis suggested that the use of 4 model variables (relating to radiocaesium adsorption on organic matter and the pH sensitivity of soil solution potassium concentration) and 1 model input (pH) are not required. The results of this analysis were used to develop a reduced model which was further evaluated in terms of comparisons to observations. The reduced model had an improved empirical performance and fewer adjustable parameters and soil characteristic inputs.     

Radiological maps for Trabzon, Turkey

The activity concentrations and absorbed gamma dose rates due to primordial radionuclides and ¹³⁷Cs have been ascertained in 222 soil samples in 18 counties of the Trabzon province of Turkey using a HPGe detector. The mean activity concentrations of ²³⁸U, ²³²Th, ⁴⁰K and ¹³⁷Cs in soil samples were 41, 35, 437 and 21 Bq kg⁻¹, respectively. Based on the measured concentrations of these radionuclides, the mean absorbed gamma dose in air was calculated as 59 nGy h⁻¹ and hence, the mean annual effective dose due to terrestrial gamma radiation was calculated as 72 μSv y⁻¹. In addition, outdoor in situ gamma dose rate (D) measurements were performed in the same 222 locations using a portable NaI detector and the annual effective dose was calculated to be 66 μSv y⁻¹ from these results. The results presented in this study are compared with other parts of Turkey. Radiological maps of the Trabzon province were composed using the results obtained from the study.     

Effect of americium-241 on luminous bacteria. Role of peroxides

The effect of americium-241 (²⁴¹Am), an alpha-emitting radionuclide of high specific activity, on luminous bacteria Photobacterium phosphoreum was studied. Traces of ²⁴¹Am in nutrient media (0.16-6.67 kBq/L) suppressed the growth of bacteria, but enhanced luminescence intensity and quantum yield at room temperature. Lower temperature (4 °C) increased the time of bacterial luminescence and revealed a stage of bioluminescence inhibition after 150 h of bioluminescence registration start. The role of conditions of exposure the bacterial cells to the ²⁴¹Am is discussed. The effect of ²⁴¹Am on luminous bacteria was attributed to peroxide compounds generated in water solutions as secondary products of radioactive decay. Increase of peroxide concentration in ²⁴¹Am solutions was demonstrated; and the similarity of ²⁴¹Am and hydrogen peroxide effects on bacterial luminescence was revealed. The study provides a scientific basis for elaboration of bioluminescence-based assay to monitor radiotoxicity of alpha-emitting radionuclides in aquatic solutions.     

Sorption of selenate on soils and pure phases: kinetic parameters and stabilisation

This study was conducted to identify the principle selenate carrier phases for two selected soils, by comparing their reactivity with selenate to that of pure phases of the solids. Silica, calcium carbonate, aluminium hydroxide, goethite, bentonite and humic acid were selected as the main soil carrier phases. Comparisons were made first on the parameter values obtained with the best fit of a kinetic sorption model which can discriminate instantaneous sorption from kinetically limited sorption. Then comparisons were made of the ability for each solid to stabilise selenate by measuring the ratio of the partition coefficient for sorption (Kd_sorption) over that of the desorption (Kd_desorption). Kinetics and stabilisation were used to help elucidate the nature of interactions with the test solid phases for a large range of selenate concentrations. The experiments were conducted over 165 h in batch reactors, the solid being isolated from the solution by dialysis tubing, at two pH (5.4 and 8) and three selenate concentrations (1 × 10⁻³, 1 × 10⁻⁶ and 1 × 10⁻⁸ mol L⁻¹). The results obtained showed that only aluminium hydroxide can sorb selenate throughout the studied pH range (pH 5.4 to 8.0). The sorption capacity on this mineral was high (Kd_sorption > 100 to 1 × 10⁴ L kg⁻¹) and the selenate was mainly stabilized by the formation of inner sphere complexes. The sorption on goethite occurred at pH 5.4 (Kd_sorption 52 L kg⁻¹), mainly as outer sphere complexes, and was null at pH 8. On silica, a weak sorption was observed only at pH 5.4 and at 165 h (Kd_sorption 4 L kg⁻¹). On bentonite, calcium carbonate and humic acid no significant sorption was observed. Concerning the two soils studied, different behaviours were observed for selenate. For soil Ro (pH 5.4), Kd_sorption was low (8 L kg⁻¹) compared to soil Bu (pH 8) (70 L kg⁻¹). The sorption behaviour of selenate on soil Ro was mainly due to outer sphere complexes, as for goethite, whereas for soil Bu the sorption was mainly attributed to inner sphere complexes followed by reduction mechanisms, probably initiated by microorganisms, in which no steady state was reached at the end of the 165 h experiments. The sorption of selenate decreased when concentrations reached 1 × 10⁻³ mol L⁻¹, due to solid saturation, except for aluminium hydroxide. Reduction of selenate seemed also to occur on goethite and soil Ro, for the same concentration, but without preventing a decrease in sorption. Thus, this work shows that the comparison of selenate behaviour between soil and pure phases helps to elucidate the main carrier phases and sorption mechanisms in soil.     

Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.