Further studies using X-ray fluorescence to sample lead contaminated carpeted surfaces

The sampling of carpeted surfaces to test for lead contamination primarily focuses upon vacuum techniques. Vacuum sampling techniques, however, require time-consuming, expensive laboratory analysis of the dusts obtained and are unable to determine total lead load on the carpet. X-ray fluorescence (XRF) analysis is an on-site, inexpensive, non-destructive, quick technique for predicting metals levels in a variety of media, such as water, soil, filter paper and painted surfaces. A 1992 study of the feasibility of XRF to analyze for lead and soil loadings on carpeted surfaces indicated that XRF can detect lead at a low enough level to warrant further study. This paper expands this earlier study and developes lead and soil loading calibration curves for three different carpet types based upon XRF lead L-beta peak areas and XRF iron and barium K-alpha peak and background areas. Results indicate that variation in the data can be reduced through modifications of the XRF analysis technique, thus reducing the statistically determined detection level, and that carpet type does affect the calibration. Detection levels of approximately 70 mg/m² for lead and 5 g/m² for soil were obtained. Overall, good agreement was found between results of this study and the earlier one. XRF shows excellent potential for quantitative analysis of lead on carpeted surfaces.     

SI-traceable certification of Cu, Cr, Cd and Pb in sediment and fly ash candidate reference materials

Many fields in environmental analytical chemistry deal with very low limits and thresholds as set by governmental legislations or transnational regulations. The need for the accuracy, comparability and traceability of analytical measurements in environmental analytical chemistry has significantly increased and total uncertainties are even asked for by accreditation bodies of environmental laboratories. This paper addresses achieving these goals to guarantee accuracy, quality control, quality assurance or validation of a method by means of certified reference materials. The assessment of analytical results in certified reference materials must be as accurate as possible and every single step has to be fully evaluated. This paper presents the SI-traceable certification of Cu, Cr, Cd and Pb contents in geological and environmentally relevant matrices (three sediments and one fly ash sample). Certification was achieved using isotope dilution (ID) ICPMS as a primary method of measurement. In order to reduce significantly the number of analytical steps and intermediate samples a multiple spiking approach was developed. The full methodology is documented and total uncertainty budgets are calculated for all certified values. A non-element specific sample digestion process was optimised. All wet chemical digestion methods examined resulted in a more or less pronounced amount of precipitate. It is demonstrated that these precipitates originate mainly from secondary formation of fluorides (essentially CaF2) and that their formation takes place after isotopic equilibration. The contribution to the total uncertainty of the final values resulting from the formation of such precipitates was in general < 0.1% for all investigated elements. Other sources of uncertainty scrutinised included the moisture content determination, procedural blank determination, cross-contamination from the different spike materials, correction for spectral interferences, instrumental background and deadtime effects, as well as the use of either certified values or IUPAC data in the IDMS equation. The average elemental content in the sediment samples was 30-130 micrograms g-1 for Pb, 0.5-3 micrograms g-1 for Cd and 50-70 micrograms g-1 for Cu. Cr was measured in one sample and was about 60 micrograms g-1. The concentrations in the fly ash sample were up to 2 orders of magnitude higher. Expanded uncertainty for the investigated elements was about 3% (coverae factor k = 2) except for Cr, (measured by high resolution ICPMS), for which the expanded uncertainty was about 7% (k = 2).     

Using environmental stressor information to predict the ecological status of Maryland non-tidal streams as measured by biological indicators

In Maryland, U.S., an interim framework has recentlybeen developed for using biologically based thresholds, or `biocriteria', to assess the health of nontidal streams statewide at watershed scales. The evaluation of impairment is based on indices of biological integrity from the Maryland Biological Stream Survey (MBSS). We applied logistic regression to quantify how the biotic integrity of streams at a local scale is affected by cumulative effects resulting from catchment land uses, point sources, and nearby transmission line rights-of-way. Indicators for land use were developed from the remote sensing National Land Cover Data and applied at different scales. We determined that the risk of local impairment in nontidal streams rapidly increases with increased urban land use in the catchment area. The average likelihood of failing biocriteria doubled with every 10% points increment in urban land, thus an increase in urban land use from 0 to 20% quadruples the risk of impairment. For the basins evaluated in this study, catchments with more than 40–50% urban land use had greater than 80% probability of failing biocriteria, on average. Inclusion of rights-of-way and point sources in the model did not significantly improve the fit for this data set, most likely because of their low numbers. The overall results indicate that our predictive modeling approach can help pinpoint stream ecosystems experiencing or vulnerable to degradation.     

Characterization of microbial communities from coastal waters using microarrays

Molecular methods, including DNA probes, were used to identify and enumerate pathogenic Vibrio species in the Chesapeake Bay; our data indicated that Vibrio vulnificus exhibits seasonal fluctuations in number. Our work included a characterization of total microbial communities from the Bay; development of microarrays that identify and quantify the diversity of those communities; and observation of temporal changes in those communities. To identify members of the microbial community, we amplified the 16S rDNA gene from community DNA isolated from a biofilm sample collected from the Chesapeake Bay in February, 2000. The resultant 75 sequences were 95% or more similar to 7 species including two recently described Shewanella species, baltica and frigidimarina, that have not been previously isolated from the Chesapeake. When the genera of bacteria from biofilm after culturing are compared to those detected by subcloning amplified 16S fragments from community DNA, the cultured sample exhibited a strong bias. In oysters collected in February, the most common bacteria were previously unknown. Based on our 16S findings, we are developing microarrays to detect these and other microbial species in these estuarine communities. The microarrays will detect each species using four distinct loci, with the multiple loci serving as an internal control. The accuracy of the microarray will be measured using sentinel species such as Aeromonas species, Escherichia coli, and Vibrio vulnificus. Using microarrays, it should be possible to determine the annual fluctuations of bacterial species (culturable and non-culturable, pathogenic and non-pathogenic). The data may be applied to understanding patterns of environmental change; assessing the health of the Bay; and evaluating the risk of human illness associated with exposure to and ingestion of water and shellfish.     

Flue gas treatability studies: a tool for techno-economic control of industrial air pollution

Air pollution problems in developing countries have gained larger fraction in the last decade especially due to non functioning and non implementation of effective air pollutioncontrol devices in industries. In industrial wastewater management, adequate treatability studies are conducted to arrive at a techno-economic treatment option. However no suchstudies were done for reducing air pollution or emission fromindustries until now in India. Little information was availableabout such studies in other countries. This article provides information about a novel technique known asflue gas treatability studies and to undertake such studies, a pilot scale system is installed in Air Pollution Control Divisionof M/s National Environmental Engineering research Institute, NEERI, Nagpur-20, India. This study is a tool for techno-economicselection of air pollution control systems specially for small/medium scale industrial emissions.     

IMPACTS OF VISITORS ON SOIL AND VEGETATION OF THE RECREATIONAL AREA “NACIMIENTO DEL RÍO MUNDO” (CASTILLA-LA MANCHA, SPAIN)

This study examines the effects of recreational use on the soil and vegetation at a site of ecological importance (Nacimiento del Río Mundo, Albacete, Spain). The most visited sites showed increased soil compaction of approximately 50%, bare ground increase to 61 ± 10% and a decrease in richness (from 25 ± 2 to 15 ± 2 species), diversity (from 4.0 ± 0.1 to 2.7 ± 0.4) and stratification of plant species (from 80 ± 11 to 21 ± 4%). The most visited sites had 90% less plant species as compared to the least visited. Intense use was associated with the presence of nitrophilous plant and vegetal species with a morphology adapted to heavy trampling. The recreational areas showed a distribution pattern of impact radiating outwards from the most used and degraded point. At the most visited point, Los Chorros (the spring of the river), the impact radiated outwards for about 20 m. A pilot experiment examining the effects of one-year restriction to visitors for access to a formerly impacted area showed a plant cover increase by anthropic and not by native species of 57 percent units.     

Land User Participation in Developing a Computerised Decision Support System for Combating Desertification

Combating desertification in natural rangelands has recently become a priority in large parts of southern Africa. Rangeland managers, farmers, scientists, conservationists and land users have been applying a variety of restoration technologies to address this problem. Bush encroachment, as part of the desertification process, involves the natural replacement of the herbaceous plant cover by undesirable problem woody species. The active and passive restoration technologies that are applied, are mainly based on indigenous knowledge and include the chemical, mechanical or manual reclamation of unproductive rangelands, as well as the combating of woody and alien species encroachment. Indigenous practices and knowledge play a major role in the effectiveness and success rate of these technologies. This project faces the challenge of bringing together both local and scientific knowledge in a single user-friendly, computerised Decision Support System (DSS) which is directly accessible by land users to support them in the process of decision making, concerning the combating of desertification. Case studies from central and northern Namibia were used to combine qualitative and quantitative data to develop this Decision Support System. The DSS currently consists of two databases and an expert system, which evaluates the results of land users’ management practices, and provides easily accessible information and advice for participants in the system, based on the incorporated data. The DSS is also linked to national and international web sites and databases to offer a wider range of information on technologies concerning agricultural and conservation practices.     

Numerical Analyses of Soft Bottom Macroinvertebrates to Diagnose the Pollution in Tropical Coastal Waters

Soft bottom benthic organisms especially polychaetes are known to adapt as r or k selected strategies to different gradients of pollution. This will result in changes of benthic community structure from that of normal structure. There are a number of techniques to assess the impact of pollution on benthic community structure. Hence, to test this hypotheses some of the univariate and multivariate techniques were applied to soft bottom macro-invertebrates data of coastal waters of Mangalore, central west coast of India, a hot-spot area. Univariate techniques such as Pearson Rosenberg Model (PRM), abundance biomass comparison curve (ABC), geometrical class distribution, dominance-diversity curve, benthic community structure indices and multivariate techniques such as cluster classification, multidimensional scaling (MDS) and principal component analysis (PCA) were used to discriminate and diagnose the disturbance among the sites. Effectiveness and applicability of some of the above techniques are highlighted and discussed with the present set of data for environmental impact assessment studies.     

Spatial properties of nutrient concentrations in the Baltic Sea

Using existing monitoring data, the present study attempts to characterize spatial patterns of surface water nutrients in the Baltic Sea. The analysis was made for two different spatial scales, differences between and within sub-basins.Non-parametric methods were chosen to reduce problems with the distributional properties of the data. By dividing the data into four seasons care was taken as to seasonality. To avoid bias due to different laboratory analysis, only data from Nordic countries were used, whose results did not apparently depart from each other. Bias due to different sampling frequency was another problem. This was reduced by using only the last observation in each season for every station and year.The results suggested differences in the nutrient concentrations between basins. The two northernmost basins (Bothnian Bay and Bothnian Sea) had lower phosphate concentrations and higher silicate concentrations compared to the rest of the Sea. Bothnian Bay and the Gulf of Finland had higher nitrate concentrations.The concentration structure within basins was studied using transects in both latitudinal and longitudinal direction. A gradient for phosphate and nitrate was found in the Gulf of Finland, with lower concentrations at the mouth. The Bothnian Sea showed lower concentrations in the middle of the basin compared to the coasts. The highest concentrations of phosphate were found close to the Finnish coast and for silicate the highest concentrations were located near the Swedish coast. It was not possible to study variation in the west-east direction within the Baltic proper, due to data shortage. For the transects in the north-south direction no differences were detected for nitrate and silicate. Phosphate gave one significant result during autumn for the transect in the eastern part of the Baltic proper.This study revealed several problems associated with the data available. Uneven sampling in space and time put severe constraints on the study. A better design of the monitoring program is suggested, where spatial properties are considered explicitly. Revision of the program in this direction is needed for reasonable calculation of total amounts and concentrations representative for a basin.