The Ratio between Chronographic and Geographic Variation in the Morphofunctional Features of Bank Vole (Clethrionomys glareolus Shreb.) in the South of Its Range

Russian Journal of Ecology - A simultaneous analysis of the chronographic variation of the mandible of bank vole (Clethrionomys glareolus Shreb.) in three longitudinally distant populations that...     

Temporal and Spatial Variations of Phytoplankton Community Structure in Lake Erhai,a Chinese Plateau Lake,with Reference to Environmental Factors

Russian Journal of Ecology - Temporal and spatial variations of phytoplankton community in Lake Erhai were investigated from May 2010 to April 2011. A total of 124 species belonging to 8 phyla and...     

崇明东滩湿地沉积物重金属污染的磁诊断

对取自崇明东滩的高潮滩、中潮滩和低潮滩的沉积物柱样进行了磁学、粒度、重金属含量等指标的分析、比较与综合研究. 结果表明:在以粉砂为主的崇明东滩,通过污染负荷指数法进行评价,除低潮滩无污染外,中潮滩和高潮滩均有中度的重金属污染. 选取中度重金属污染的高潮滩沉积物柱样进行粒度、重金属含量以及磁性参数的相关性分析显示,χ_fd,χ_ARM/SIRM与重金属含量和粘土(粒径<4 μm)之间有较高的相关性,并以此建立了磁诊断线性回归模型;χ_fd和χ_ARM/SIRM可作为重金属含量的替代指标.      

玉米浸泡液制备苏云金杆菌生物杀虫剂的影响因素研究

以玉米淀粉生产过程中的浸泡液为培养基,摇瓶发酵培养苏云金杆菌生物杀虫剂,通过一系列单因子试验,考察了不同培养条件(种子液的种龄、接种量、浸泡液的含固率、初始pH值、摇床转速、发酵温度及发酵时间)对苏云金杆菌在玉米浸泡液中的生长(菌数增长与芽孢形成)以及发酵液的生物毒效的影响.研究表明,在最佳摇瓶培养条件(种子液种龄10 h,接种量2%,浸泡液含固量3%,初始pH值7.0～7.5,摇床转速200 r/min,发酵温度30℃)下发酵48 h,活菌数和活芽孢数分别可达到7.9×108 CFU/mL和5.5×108 CFU/mL,毒力效价为698.0 IU/μL.本试验可为生物农药的工业化生产提供实用参数.     

Distributions of heavy metals in the surface sediments of the Gulf of Saros, NE Aegean Sea

The Gulf of Saros in the northeastern Aegean Sea (Turkey) is a relatively unpolluted marine environment. There is almost no industry and only small settlements in the surrounding region. The main sources of fresh water and sediment to the Gulf are the Meric River in the northwest and the Kavak Creek in the east. It has an asymmetric bathymetry with a 10-km-wide shelf to the north and up to 15-km-wide, 700-m-deep trough in the south. Water circulation in the Gulf is characterized by longshore currents and anticyclonic eddies. The Black Sea waters, leaving the Sea of Marmara through the Canakkale Strait, are known to enter the southern Gulf during the summer. The surface sediments on the northern shelf consist mainly of sand, whereas those on the slope and the deep trough are mainly silt and clay. The ranges of Fe, Mn, Cu, Zn, Pb, Ni, and Hg contents of the surface sediments from the Gulf of Saros are 0.25 4.60%, 114 1740 ppm, 6-44 ppm, 23-154 ppm, 2-80 ppm, 14-145 ppm, and 10-130 ppb, respectively. These values are low compared to those from the other neighboring marine environments, indicating the pristine nature of the Gulf in terms of metal pollution. However, most metal and organic carbon (Corg) distributions in the Gulf sediments show the effect of anthropogenic and natural inputs to the northwestern and eastern shelf areas from the Meric River and the Kavak Creek and to the deep trough from the Black Sea waters.     

Distribution and possible source of trace elements in the sediment cores of a tropical macrotidal estuary and their ecotoxicological significance

The paper presents the first document regarding concentration, distribution and possible sources of selected trace elements (Cu, Fe, Mn, Zn, Cr, Co, Ni, Pb, Al, B and Ba) in core sediments (<63 micro particle size) from the lower stretch of Hugli (Ganges) estuary, northeast coast of Bay of Bengal by ICP-AES and EDXRF to evaluate geochemical processes influencing their distribution and possible environmental consequences. The levels of elements showed a wide range of variations in different core depths, in upper and lower intertidal zones as well as among three sampling stations. The most interesting feature of the study is the downward increase of concentrations of majority of the elements reaching overall maximum values at a depth of 20-28 cm in upper littoral zone of the site located in the extreme downstream stretch of the estuary. Values of organic carbon showed very strong positive correlations with most of the elements as revealed by correlation matrix (r) values. The interelemental relationship revealed the identical behavior of element during its transport in the estuarine environment. The overall variation in concentration can be attributed to differential discharge of untreated effluents originating from industrial, agricultural, and aquacultural sources as well as from domestic sewage along with the fishing and boating activities. The resulting compositional dataset was tested by principal component analyses and cluster analyses. Pollution load index (PLI) and index of Geoaccumulation (Igeo) revealed overall low values but the enrichment factors (EFs) for Pb were typically high for all the stations. The mean concentrations of Zn and to some extent Cu exceeded the Effects Range-Low (ER-L) values in the majority of the cases indicating that there may be some ecotoxicological risk to organisms living in sediments. The concentration of the trace elements reported in this work is useful as baselines for comparison in future sediment quality studies.     

The Use of Natural Taraxacum officinale Wigg. Populations for Assessing the State of Technogenically Disturbed Areas

Russian Journal of Ecology -     

Carbon Emission from the Surface of Coarse Woody Debris in Korean Pine Forests of Southern Primorye

Carbon dioxide fluxes from the surface of coarse woody debris (CWD) have been measured in Korean pine forests of the southern Sikhote-Alin mountain range. The seasonal dynamics of oxidative conversion of CWD carbon have been evaluated, and average values of the CO₂ emission rate have been determined for CWD fragments of three tree species at different stages of decomposition. The degree of decomposition is an important factor of spatial variation in CO₂ emission rate, and temporal variation in this parameter is adequately described by an exponential function of both CWD temperature and air temperature (R² = 0.65–0.75).     

Energy use,blue water footprint,and greenhouse gas emissions for current food consumption patterns and dietary recommendations in the US

This article measures the changes in energy use, blue water footprint, and greenhouse gas (GHG) emissions associated with shifting from current US food consumption patterns to three dietary scenarios, which are based, in part, on the 2010 USDA Dietary Guidelines (US Department of Agriculture and US Department of Health and Human Services in Dietary Guidelines for Americans, 2010, 7th edn, US Government Printing Office, Washington, 2010). Amidst the current overweight and obesity epidemic in the USA, the Dietary Guidelines provide food and beverage recommendations that are intended to help individuals achieve and maintain healthy weight. The three dietary scenarios we examine include (1) reducing Caloric intake levels to achieve “normal” weight without shifting food mix, (2) switching current food mix to USDA recommended food patterns, without reducing Caloric intake, and (3) reducing Caloric intake levels and shifting current food mix to USDA recommended food patterns, which support healthy weight. This study finds that shifting from the current US diet to dietary Scenario 1 decreases energy use, blue water footprint, and GHG emissions by around 9 %, while shifting to dietary Scenario 2 increases energy use by 43 %, blue water footprint by 16 %, and GHG emissions by 11 %. Shifting to dietary Scenario 3, which accounts for both reduced Caloric intake and a shift to the USDA recommended food mix, increases energy use by 38 %, blue water footprint by 10 %, and GHG emissions by 6 %. These perhaps counterintuitive results are primarily due to USDA recommendations for greater Caloric intake of fruits, vegetables, dairy, and fish/seafood, which have relatively high resource use and emissions per Calorie.     

An improvement selection methodology for key performance indicators

Key performance indicators (KPIs) are critical measures for determining the health of a manufacturing plant in relationship to the plant’s goals. In today’s competitive environment, manufacturers cannot be careless about their business; in fact, they must ensure that their KPIs are effective and use them to make improvements when necessary. This paper describes a method for suggesting improvements to a manufacturer’s KPIs, based on the results achieved from a workshop to score the KPI on a number of predefined criteria. The approach uses a prospect theory approach to weight the scoring. Different problem formulations were derived that allow for both recommendations for improvements and the recommendations for disinvestments to over-performing KPIs. The authors applied the developed approach to two workshop outputs, each from independent manufacturers, and the results highlighted the significant difference between the two manufacturers in terms of improvement priorities and KPI assessment. The optimal improvement suggestions were compared to those found through a fast heuristic. It was determined that given the underlying assumptions of the approach that the heuristic solutions were just as adequate as the optimal ones.