Collaborative activity with business partners for improvement of product environmental performance using LCA

Collaborative activities with business partners have potential to improve environmental performance of product and life cycle assessment (LCA) is an essential technique to implement eco-design of product and production process. However, collection of LCA data from supply chain is a major issue for LCA practitioners. We propose a Supply Chain Collaboration Model (SCCM), which is a framework for collecting producer-specific LCA data from business partners and for promoting improvement activity of product environmental performance. We demonstrate the practicability of the SCCM using three case studies. In each case study, two or three partner companies organized a product improvement project and carried out process analysis techniques such as LCA and material flow cost accounting (MFCA). As a result, improvement activities from the economical standpoint could provide an incentive for business partners to collect LCA data, and thus the SCCM is an effective framework for eco-design.     

Amelioration effect of humic acid extracted from solubilized excess sludge on saline-alkali soil

In this study, the main characteristics and soil amendment effects on the saline–alkali soil of humic acid extracted from solubilized excess sludge (SS-HA) were investigated. The excess sludge was solubilized prior to extraction to improve the humic acid recovery rate. The structural features of SS-HA were characterized by an elemental analysis, Fourier transform infrared spectroscopy, and ¹H-nuclear magnetic resonance spectroscopy, and compared with those of HA extracted from non-solubilized excess sludge (ES-HA). The results showed that extraction efficiency of humic acid was enhanced by using solubilization, although structural properties of humic acid extracted from solubilized excess sludge were almost the same as those of ES-HA. To study a utilization method of SS-HA, the soil amendment effects on saline–alkali soil by mixture of SS-HA were investigated with a model soil-column experiment. SS-HA reduced the pH of the saline–alkali soil, and the effect was immediately observed or faster than the case in which only peat is added. Moreover, the cation exchangeable capacity of the saline–alkali soil was enhanced by addition of SS-HA.     

Environmental risk assessment and concentration trend of atmospheric volatile organic compounds in Hyogo Prefecture, Japan

Purpose  

The purpose of this study was to evaluate the influences of volatile organic compounds (VOCs) emissions on hazardousness and photochemical reactivity and to propose efficient VOCs abatement strategies.     

Trends in the enantiomeric composition of polychlorinated biphenyl atropisomers in human breast milk

For the precise estimation of the risk to human health caused by persistent organic pollutants (POPs), it is important to discuss enantiomer fraction value (EF value) because it is reported that behaviors such as stability and toxicity of enantiomers are quite different in human body. Among POPs, polychlorinated biphenyl (PCB) is known as one of the most persistent compounds in human breast milk samples. The main exposure source of PCB for human body is mostly from food especially in seafood. The contamination of fish and shellfish has been a serious problem for the Japanese, who consume a large amount of fish in their diet. PCBs have 19 congeners which are chlorine-substituted in 3- or 4- ortho positions are known to have enantiomers. In this study, we analyzed PCB 183 (2,2′,3,4,4′,5′,6-hepta CB) in human breast milk and fish samples enantioselectively and revealed the time trends of the EF value. Though EF value of PCB 183 in fish samples sustained close to racemate (EF?=?0.5) from 1982 to 2012, that in breast milk increased over time. This fact indicates that (+)-PCB-183 has greater bioaccumulation potential than (-)-PCB-183 in human body; therefore, the toxicity of (+)-PCB-183 should be emphasized.     

Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.     

Prenatal diagnosis for Epidermolysis bullosa: a study of 144 consecutive pregnancies at risk

Epidermolysis bullosa (EB) is a group of inherited disorders characterized by increased skin fragility, resulting in blisters and erosions after minor trauma. Mutations in 10 structural genes expressed in the cutaneous basement membrane zone have been reported. The DebRA Molecular Diagnostics Laboratory at Jefferson Medical College has performed 144 DNA-based prenatal diagnoses since 1993 in families at risk for recurrence of the most severe forms of EB, including the recessive dystrophic EB (RDEB), junctional EB (JEB), EB with pyloric atresia (EB-PA), and EB simplex (EBS). A mutation-detection strategy using either conformation-sensitive gel electrophoresis (CSGE) or denaturing high-performance liquid chromatography (dHPLC) scanning analysis, followed by nucleotide sequencing, was applied to most cases with DEB and to all JEB, EB-PA, and EBS families. For some RDEB families, linkage analysis was performed, either alone when the inheritance pattern was clear or in combination with one mutation. Among the 144 prenatal diagnoses, 63 were for RDEB, 69 for JEB, 6 for EB-PA, and 6 for EBS. Twenty-eight normal, 73 heterozygous carrier, and 28 affected RDEB, JEB, and EB-PA pregnancies were reported in these recessively inherited diseases. Two affected and four normal pregnancies were predicted in dominantly inherited EBS. Among the 144 pregnancies, 9 were terminated without confirmation, 13 cases were lost to follow-up, and 6 pregnancies are ongoing. There were 6 families with inconclusive results due either to recombination events between flanking markers, absence of informative markers for one allele, or lack of sample from the previously affected child. There were three discordant results, one that was explained by maternal contamination of the chorionic villus sample and two that were unresolved. Overall, the availability, relative ease, and over 98% success rate make molecular DNA-based prenatal diagnosis a viable option for EB families at risk. Copyright © 2003 John Wiley & Sons, Ltd.     

Adsorption capacity of powdered activated carbon for 3,5-dichlorophenol in activated sludge

The objectives of this study were to evaluate the performance of powdered activated carbon treatment (PACT) process based on the adsorption capacity of powdered activated carbon (PAC) in activated sludge and the effect of dissolved organic substances in activated sludge on the adsorption capacity of PAC. The DCP adsorption capacity of three PACs originated from different raw materials (coal, soft coal and sawdust) in activated sludge were 29%, 34% and 17% of that of new PAC, respectively. The performance of PACT process for shock loading of 3,5-dichlorophenol (3,5-DCP) was different among PACs in spite of the same adsorption capacity in new PAC. The performance of PACT process for removal of DCP is dependent not on the adsorption capacity of new PAC but on the adsorption capacity of PAC in the aeration tank. Dissolved organic matter (DOM) with molecular weight smaller than 50kDa did not affect the adsorption capacity of PAC for 3,5-DCP in the activated sludge reactor. DOM with molecular weight larger than 50kDa and biofilm developed on the surface of PAC seemed to be responsible for the decreased adsorption capacity of PAC for the DCP.     

Three-dimensional diffusion of non-sorbing species in porous sandstone: computer simulation based on X-ray microtomography using synchrotron radiation

The diffusion pathways of porous sandstone were examined by a three-dimensional (3-D) imaging technique based on X-ray computed tomography (CT) using the SPring-8 (Super Photon ring-8 GeV, Hyogo, Japan) synchrotron radiation facility. The analysis was undertaken to develop better understanding of the diffusion pathways in natural rock as a key factor in clarifying the detailed mechanism of the diffusion of radionuclides and water molecules through the pore spaces of natural barriers in underground nuclear waste disposal facilities. A cylindrical sample (diameter 4 mm, length 6 mm) of sandstone (porosity 0.14) was imaged to obtain a 3-D image set of 450(3) voxels=2.62(3) mm(3). Through cluster-labeling analysis of the 3-D image set, it was revealed that 89% of the pore space forms a single large pore-cluster responsible for macroscopic diffusive transport, while only 11% of the pore space is made up of isolated pores that are not involved in long-range diffusive transport. Computer simulations of the 3-D diffusion of non-sorbing random walkers in the largest pore cluster were performed to calculate the surface-to-volume ratio of the pore, tortuosity (diffusion coefficient in free space divided by that in porous rock). The results showed that (i) the simulated surface-to-volume ratio is about 60% of the results obtained by conventional pulsed-field-gradient proton nuclear magnetic resonance (NMR) laboratory experiments and (ii) the simulated tortuosity is five to seven times larger than the results of laboratory diffusion experiments using non-sorbing I(-) and Br(-). These discrepancies are probably attributed to the intrinsic sample heterogeneity and limited spatial resolution of the CT system. The permeability was also estimated based on the NMR diffusometry theory using the results of the random walk simulations via the Kozeny-Carman equation. The estimated permeability involved an error of about 20% compared with the permeability measured by the conventional method, suggesting that the diffusometry-based NMR well logging with gradient coils is applicable to the in-situ permeability measurement of strata. The present study demonstrated that X-ray CT using synchrotron radiation is a powerful tool for obtaining 3-D pore structure images without the beam-hardening artifacts inevitable in conventional CT using X-ray tubes.