Effect of Chlorella pyrenoidosa on fecal excretion and liver accumulation of polychlorinated dibenzo-p-dioxin in mice

The effect of Chlorella pyrenoidosa on fecal excretion and liver accumulation of polychlorinated dibenzo-p-dioxin in C57BL/6N mice administered dioxin was examined. Mice were administered 2.2 microg of 1,2,3,4,7,8-hexachlorodibenzo-p-dioxin (H6CDD) dissolved in corn oil once after a period of acclimatization, after which they were fed either a basal diet, a 10% C. pyrenoidosa diet, or a 10% Spinach diet, for five weeks. Among mice fed the 10% C. pyrenoidosa diet, cumulative fecal excretion of H6CDD over the first week following administration was significantly greater (9.2-fold) than that observed among mice fed the basal diet. Moreover, excretion during the fifth week following administration of H6CDD was still significantly greater (3.1-fold) among mice fed the 10% C. pyrenoidosa diet than among mice fed the basal diet. Five weeks after administration of H6CDD, liver accumulation of H6CDD in mice fed the 10% C. pyrenoidosa diet was significantly less than that observed among mice fed either the basal diet and the Spinach diet (by 27.9% and 34.8%, respectively). These findings suggest that C. pyrenoidosa may be useful in inhibiting the absorption of dioxins via food and the reabsorption of dioxins stored already in the body in the intestinal tract, thus preventing accumulation of dioxins within the body.     

Removal of lead from aqueous solutions by condensed tannin gel adsorbent

Lead has caused serious environmental pollution due to its toxicity, accumulation in food chains and persistence in nature.In this paper, lead removal from aqueous solutions was investigated using condensed tannin gel adsorbent synthesized from a natural tannin compound. It is found that the adsorption is strongly affected by pH values of aqueous solutions.Within pH range of 3.5-6,when initial lead concentration is 100 mg/L, removal efficiency is more than 90%.Adsorption equilibrium is reached within 150 minutes.The adsorption isotherm fits well with the Langmuir equation, by which the saturated adsorption uptake of 190 mg Pb^2 /g dry tannin gel adsorbent is obtained.By means of thermodynamics analysis,it is revealed that the process is exothermic and the adsorption heat is up to 38.4kJ/mol.With respect to high efficiency, moderate pH requirement and minimized second pollution, the tannin gel adsorbent exhibits a promising potential in the removal of lead from wastewater.     

Characteristic of organic aerosol in a remote area of Okinawa Island

A continuous investigation of aerosol pollutants in Cape Hedo, Japan was conducted from October 2005 to August 2006 by Aerodyne aerosol mass spectrometer (AMS). This article focused on the analysis of long-range transport of organic aerosol from continental origin to the remote island. Based on the transport distance and air mass origin, four main air mass origins were considered, including North China, South China, Japan and Korea. Although the mass concentration and air mass origin were quite different during study period, the mass spectrum and size distribution of organic matter and oxidized organics were similar, which showed uni-modal distribution with modal diameter of around 500 nm. The loss rate of organics was (5.15 ± 0.55) × 10-⁶ s-¹ obtained by plotting the concentration against the transport time. Conversion rate of SO₂ to sulfate and oxidation rate of organics were (1.07 ± 0.15) × 10-⁵ and (1.09 ± 0.52) × 10-⁶s-¹, respectively.     

A Mechanical Model for Sieving of Large Deposited Atmospheric Particulates in Surface Soil

A mechanical model for analyzing the sieving of large particulates in soil is proposed and a procedure for assessing soil contamination by airborne hazardous particulates is discussed. The model proposes that deposition of airborne particulates in soil is the results of transport processes of particulates in surface soil. The mechanical sieving of particulates is due to (a) trapping of particulates by the constricted necks of soil pores, (b) adhesion of particulates to pore walls, and (c) suspension in soil water. The probability of particulates being sieved is determined by the cumulative frequency of pore size distribution of the soil. The proposed model indicated that more than 95% of the falling particulates were sieved in the top 5 cm of the surface soil. Furthermore, the model estimated that the unrecorded initial fall of ¹³⁷Cs associated with contaminated particulates was in the range of 2229–2310 kBqm⁻² d⁻¹ and that the unrecorded initial depositions in the 1-cm surface layer were in the range from 129 to 135 kBqkg⁻¹ at a location of about 30 km from the Fukushima nuclear power plant.

     

Monitoring OH-PCBs in PCB transport worker’s urine as a non-invasive exposure assessment tool

In this study, we analyzed hydroxylated polychlorinated biphenyls (OH-PCBs) in urine of both PCB transport workers and PCB researchers. A method to monitor OH-PCB in urine was developed. Urine was solid-phase extracted with 0.1% ammonia/ methanol (v/v) and glucuronic acid/sulfate conjugates and then decomposed using β-glucuronidase/arylsulfatase. After alkaline digestion/derivatization, the concentration of OH-PCBs was determined by HRGC/HRMS-SIM. In the first sampling campaign, the worker’s OH-PCB levels increased several fold after the PCB waste transportation work, indicating exposure to PCBs. The concentration of OH-PCBs in PCB transport workers’ urine (0.55~11 μg/g creatinine (Cre)) was higher than in PCB researchers’ urine (< 0.20 μg/g Cre). However, also a slight increase of OH-PCBs was observed in the researchers doing the air sampling at PCB storage area. In the second sampling, after recommended PCB exposure reduction measures had been enacted, the worker’s PCB levels did not increase during handling of PCB equipment. This suggests that applied safety measures improved the situation. Hydroxylated trichlorobiphenyls (OH-TrCBs) were identified as a major homolog of OH-PCBs in urine. Also, hydroxylated tetrachlorobiphenyls (OH-TeCBs) to hydroxylated hexachlorobiphenyls (OH-HxCBs) were detected. For the sum of ten selected major indicators, a strong correlation to total OH-PCBs were found and these can possibly be used as non-invasive biomarkers of PCB exposure in workers managing PCB capacitors and transformer oils. We suggest that monitoring of OH-PCBs in PCB management projects could be considered a non-invasive way to detect exposure. It could also be used as a tool to assess and improve PCB management. This is highly relevant considering the fact that in the next 10 years, approx. 14 million tons of PCB waste need to be managed. Also, the selected populations could be screened to assess whether exposure at work, school, or home has taken place.     

Ultra-High Efficiency Photovoltaic Cells for Large Scale Solar Power Generation

The primary targets of our project are to drastically improve the photovoltaic conversion efficiency and to develop new energy storage and delivery technologies. Our approach to obtain an efficiency over 40% starts from the improvement of III–V multi-junction solar cells by introducing a novel material for each cell realizing an ideal combination of bandgaps and lattice-matching. Further improvement incorporates quantum structures such as stacked quantum wells and quantum dots, which allow higher degree of freedom in the design of the bandgap and the lattice strain. Highly controlled arrangement of either quantum dots or quantum wells permits the coupling of the wavefunctions, and thus forms intermediate bands in the bandgap of a host material, which allows multiple photon absorption theoretically leading to a conversion efficiency exceeding 50%. In addition to such improvements, microfabrication technology for the integrated high-efficiency cells and the development of novel material systems that realizes high efficiency and low cost at the same time are investigated.     

Sources, spatial variation, and speciation of heavy metals in sediments of the Tamagawa River in Central Japan

Sediments of the Tamagawa River in central Japan were studied to explain the spatial variation, to identify the sources of heavy metals, and to evaluate the anthropogenic influence on these pollutants in the river. Sediment samples were collected from 20 sites along the river (five upstream, four midstream, and 11 downstream). Heavy metal concentrations, viz. chromium, nickel, copper, zinc, lead, cadmium, and molybdenum, in the samples were measured using inductively coupled plasma-mass spectroscopy. The chemical speciations of heavy metals in the sediments were identified by the widely used five-step Hall method. Lead isotopes were analyzed to identify what portion is contributed by anthropogenic sources. The total heavy metal concentrations were compared with global averages for continental crust (shale) and average values for Japanese river sediments. The mean heavy metal concentrations were higher in downstream sediments than in upstream and midstream samples, and the concentrations in the silt samples were higher than those in the sand samples. Speciation results demonstrate that, for chromium and nickel, the residual fractions were dominant. These findings imply that the influence of anthropogenic chromium and nickel contamination is negligible, while copper, zinc, and lead were mostly extracted in the non-residual fraction (metals in adsorbed/exchangeable/carbonate forms or bound to amorphous Fe oxyhydroxides, crystalline Fe oxides, or organic matter), indicating that these elements have high chemical mobility. The proportion of lead (Pb) isotopes in the downstream silt samples indicates that Pb accumulation is primarily derived from anthropogenic sources.     

Concentration levels and congener profiles of polychlorinated biphenyls, pentachlorobenzene, and hexachlorobenzene in commercial pigments

The concentration levels and congener profiles of polychlorinated biphenyls (PCBs), pentachlorobenzene (PeCBz), and hexachlorobenzene (HxCBz) were assessed in commercially available organic pigments. Among the azo-type pigments tested, PCB-11, which is synthesized from 3,3′-dichlorobendizine, and PCB-52, which is synthesized from 2,2′,5,5′-tetrachlorobendizine, were the major congeners detected. It is speculated that these were byproducts of chlorobendizine, which has a very similar structure. The total PCB concentrations in this type of pigment ranged from 0.0070 to 740 mg/kg. Among the phthalocyanine-type pigments, highly chlorinated PCBs, mainly composed of PCB-209, PeCBz, and HxCBz were detected. Their concentration levels ranged from 0.011 to 2.5 mg/kg, 0.0035 to 8.4 mg/kg, and 0.027 to 75 mg/kg, respectively. It is suggested that PeCBz and HxCBz were formed as byproducts and converted into PCBs at the time of synthesizing the phthalocyanine green. For the polycyclic-type pigments that were assessed, a distinctive PCB congener profile was detected that suggested an impact of their raw materials and the organic solvent used in the pigment synthesis. PCB pollution from PCB-11, PCB-52, and PCB-209 pigments is of particular concern; therefore, the monthly variations in atmospheric concentrations of these pollutants were measured in an urban area (Sapporo city) and an industrial area (Muroran city). The study detected a certain level of PCB-11, which is not included in PCB technical mixtures, and revealed continuing PCB pollution originating from pigments in the ambient air.     

Ultra-high efficiency photovoltaic cells for large scale solar power generation

The primary targets of our project are to drastically improve the photovoltaic conversion efficiency and to develop new energy storage and delivery technologies. Our approach to obtain an efficiency over 40% starts from the improvement of III-V multi-junction solar cells by introducing a novel material for each cell realizing an ideal combination of bandgaps and lattice-matching. Further improvement incorporates quantum structures such as stacked quantum wells and quantum dots, which allow higher degree of freedom in the design of the bandgap and the lattice strain. Highly controlled arrangement of either quantum dots or quantum wells permits the coupling of the wavefunctions, and thus forms intermediate bands in the bandgap of a host material, which allows multiple photon absorption theoretically leading to a conversion efficiency exceeding 50%. In addition to such improvements, microfabrication technology for the integrated high-efficiency cells and the development of novel material systems that realizes high efficiency and low cost at the same time are investigated.     

Determination of the human cytochrome P450 monooxygenase catalyzing the enantioselective oxidation of 2,2′,3,5′,6-pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183)

2,2′,3,5′,6-Pentachlorobiphenyl (PCB 95) and 2,2′,3,4,4′,5′,6-heptachlorobiphenyl (PCB 183) possess axial chirality and form the aS and aR enantiomers. The enantiomers of these congeners have been reported to accumulate in the human body enantioselectively via unknown mechanisms. In this study, we determined the cytochrome P450 (CYP) monooxygenase responsible for the enantioselective oxidization of PCB 95 and PCB 183, using a recombinant human CYP monooxygenase. We evaluated 13 CYP monooxygenases, namely CYP1A1, CYP1A2, CYP1B1, CYP2A6, CYP2B6, CYP2C8, CYP2C19, CYP2E1, CYP2J2, CYP3A4, CYP3A5, CYP4F2, and aromatase (CYP19), and revealed that CYP2A6 preferably oxidizes aS-PCB 95 enantioselectively; however, it did not oxidize PCB 183. The enantiomer composition was elevated from 0.5 (racemate) to 0.54. In addition, following incubation with CYP2A6, the enantiomer fraction (EF) of PCB 95 demonstrated a time-dependent increase.