Woodchip-mixing porous mortar’s adsorption of cesium in aqueous media

Journal of Material Cycles and Waste Management - The radioactive cesium (radio-Cs) released following the Fukushima Daiichi Nuclear Power Plant accident was unevenly distributed in soil, sediment,...     

Three-dimensional diffusion of non-sorbing species in porous sandstone: computer simulation based on X-ray microtomography using synchrotron radiation

The diffusion pathways of porous sandstone were examined by a three-dimensional (3-D) imaging technique based on X-ray computed tomography (CT) using the SPring-8 (Super Photon ring-8 GeV, Hyogo, Japan) synchrotron radiation facility. The analysis was undertaken to develop better understanding of the diffusion pathways in natural rock as a key factor in clarifying the detailed mechanism of the diffusion of radionuclides and water molecules through the pore spaces of natural barriers in underground nuclear waste disposal facilities. A cylindrical sample (diameter 4 mm, length 6 mm) of sandstone (porosity 0.14) was imaged to obtain a 3-D image set of 450(3) voxels=2.62(3) mm(3). Through cluster-labeling analysis of the 3-D image set, it was revealed that 89% of the pore space forms a single large pore-cluster responsible for macroscopic diffusive transport, while only 11% of the pore space is made up of isolated pores that are not involved in long-range diffusive transport. Computer simulations of the 3-D diffusion of non-sorbing random walkers in the largest pore cluster were performed to calculate the surface-to-volume ratio of the pore, tortuosity (diffusion coefficient in free space divided by that in porous rock). The results showed that (i) the simulated surface-to-volume ratio is about 60% of the results obtained by conventional pulsed-field-gradient proton nuclear magnetic resonance (NMR) laboratory experiments and (ii) the simulated tortuosity is five to seven times larger than the results of laboratory diffusion experiments using non-sorbing I(-) and Br(-). These discrepancies are probably attributed to the intrinsic sample heterogeneity and limited spatial resolution of the CT system. The permeability was also estimated based on the NMR diffusometry theory using the results of the random walk simulations via the Kozeny-Carman equation. The estimated permeability involved an error of about 20% compared with the permeability measured by the conventional method, suggesting that the diffusometry-based NMR well logging with gradient coils is applicable to the in-situ permeability measurement of strata. The present study demonstrated that X-ray CT using synchrotron radiation is a powerful tool for obtaining 3-D pore structure images without the beam-hardening artifacts inevitable in conventional CT using X-ray tubes.     

Plasticity in size and age at maturity in a monogamous fish: effect of host coral size and frequency dependence

The number and maximum body size of the gobioid fish, Paragobiodon echinocephalus, increase with the size of its obligate host coral, Stylophora. Only the largest two individuals breed monogamously in each coral head, and the reproductive success of each spawning is positively correlated with body size. In this study, the plasticity in size and age at maturity in P. echinocephalus was examined. We analyzed life history data from gobies 15–20 mm TL (total length) at their initial marking. Gobies found in larger corals were of lower rank in size order and began to breed later at a larger size, usually upon moving to other corals. The size at maturity ranged widely from 17.2 to 36.0 mm TL. After maturation, growth rates decreased. Mortality, however, was not affected by the timing of maturation. The host coral size did not affect the growth and mortality of marked fish, but the mortality rate of juveniles prior to marking appeared to be higher in smaller corals. The estimated lifetime reproductive success did not differ between the gobies inhabiting corals of different size. Thus the plasticity in size and age at maturity in this species may be maintained by frequency-dependent selection in choosing a host coral size that affects an individual’s social status. Received: 5 April 1995/Accepted after revision: 18 February 1996     

Composting of food refuse from a student restaurant in Hokkaido University

Over a period of 21 months, we composted food refuse from a student restaurant in Hokkaido University using a commercially available composting machine. The machine had two reactors, each with a working volume of 250 l. The refuse was mixed with sawdust in a ratio of 5 l sawdust to 10 kg refuse, and this mixture was fed into the machine daily. We studied the characteristics of the refuse, the composting mixture, and the finished compost in an effort to optimize the operating parameters. We also evaluated the effectiveness of the composting process by determining the decomposition rates of the composting materials. The optimum moisture content of the composting mixture was between 30% wet basis (wb) and 40% wb in this machine. The composting machine worked well when the first reactor was filled with composting mixture and 0.5 kg lime was added once per week. The mass of the materials supplied was reduced by 84% over the study period. The decomposition rate of the volatile matter in all composting materials was 66%. The mass of the food refuse supplied was 14.8 kg/day on average, and the moisture content of the refuse was 77% wb on average. Received: October 4, 1999 / Accepted: April 4, 2000     

Total OH reactivity and VOC analyses for gasoline vehicular exhaust with a chassis dynamometer

Total OH reactivity for the exhaust gas of gasoline vehicles was measured for the first time under nine different driving conditions with a chassis dynamometer at the National Institute for Environmental Studies (NIES). Along with the total OH reactivity measurements, analysis of trace species such as CH₄, CO, NO, NO₂, and 56 kinds of volatile organic compounds (VOCs), including two aldehydes, was carried out. The ratio of alkanes to alkenes in the exhaust gas turned out to depend on the condition of the driving cycles. There were a considerable number of unidentified peaks obtained during GC analysis. About 15–30% of the total carbon was unidentified species. The chemical compositions of vehicular exhaust were found to depend on the temperature of the engine or catalysts. The contribution of OH reactivity to the species obtained depended on the temperature condition for the engine. The calculated total OH reactivity for VOCs was compared with ozone formation potential (OFP) and it turned out that there are in good correlation, while the correlation for “Cold” start deviates from that for “Hot” start. The measured and calculated OH reactivities were compared with each other. For all driving cycles, the calculated OH reactivity was confirmed to be an underestimation, implying the existence of unknown species in the exhaust gas. The percentage contribution of OH reactivity to the unknown species during “Cold” start was about 17.5%, which was almost the same as that for “Hot” start at 17.0%. However, the absolute value of OH reactivity for “Cold” start was about ten times higher than that for “Hot” start.     

Adsorption characteristics of carbonaceous adsorbents for organic pollutants in a model incineration exhaust gas

Adsorption characteristics of carbonaceous adsorbents were examined using 1,2,3,4-tetrachlorobenzene, naphthalene and 2,4,6-tribromophenol as adsorbates. The breakthrough and equilibrium adsorption characteristics were evaluated using laboratory-scale adsorption test equipment. A micropore volume of diameter less than 2 nm is the most important factor governing the adsorption capacity of all adsorbates. A kinetic analysis was performed and the adsorption behavior of the adsorbates was analyzed. Diffusion within porous particles controls the adsorption rate in this system, and the diffusion process is a function of pore diffusion. The operating conditions in working incineration facility adsorbers were reviewed and the breakthrough time of these adsorbents in actual adsorbers was estimated using the mass transfer zone method. Information on the optimal operating conditions of adsorbers was derived from the adsorption breakthrough characteristics.     

Sensor-based sorting of waste digital devices by CNN-based image recognition using composite images created from mass and 2D/3D appearances

Journal of Material Cycles and Waste Management - To improve the recycling process of waste from electrical products, we developed a sensor-based sorting system using convolutional neural network...     

The academic medical centre and nongovernmental organisation partnership following a natural disaster

The global response to the 12 January 2010 earthquake in Haiti revealed the ability to mobilise medical teams quickly and effectively when academic medical centres partner non-governmental organisations (NGO) that already have a presence in a zone of devastation. Most established NGOs based in a certain region are accustomed to managing the medical conditions that are common to that area and will need additional and specialised support to treat the flux of myriad injured persons. Furthermore, an NGO with an established presence in a region prior to a disaster appears better positioned to provide sustained recovery and rehabilitation relief. Academic medical centres can supply these essential specialised resources for a prolonged time. This relationship between NGOs and academic medical centres should be further developed prior to another disaster response. This model has great potential with regard to the rapid preparation and worldwide deployment of skilled medical and surgical teams when needed following a disaster, as well as to the subsequent critical recovery phase.