Self‐efficacy changes in groups: effects of diversity,leadership, and group climate

Self‐efficacy belief is a significant predictor of behavioral choices in terms of goal setting, the amount of effort devoted to a particular task, and actual performance. This study conceives of formation and change of self‐efficacy as a social and context‐dependent process. We hypothesized that different group factors (discretionary and ambient group stimuli) influence changes in members' self‐efficacy through differing routes (individual‐level and cross‐level processes). We tested our hypotheses using data from individuals in 169 training groups who attended a 5‐day workshop designed to increase participants' job‐search skills and efficacy. Specifically, we examined the degree of change in participants' job‐search efficacy before and after the workshop. The results showed that (a) membership diversity in education was positively related to increases in job‐search efficacy, (b) supportive leadership contributed to job‐search efficacy at the individual level of analysis with no cross‐level effects, and (c) open group climate contributed to job‐search efficacy through both individual‐level and cross‐level processes. Limitations and directions for future research are discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Possible routes for lead accumulation in feral pigeons (Columba livia)

This study examined possible routes for lead (Pb) accumulation in resident pigeons collected from rural, urban, and four industrial sites in Korea. The accumulation pattern of Pb was comparable to the study sites. The highest Pb concentration was found in the bone, followed by kidney, liver, and lung of pigeons. Highest Pb residues in bones were found in urban (Seoul), and two industrial complex areas (Busan and Ulsan), which were about 15 times higher than rural area (Duckjuk island), and followed by Ansan and Yochon industrial areas. Regional Pb variations in liver, kidney, and lung tissues were also similar pattern with the bone Pb difference. These findings indicate that Pb accumulation in tissues of pigeons may be affected by the Pb exposure in their respective habitats. Crop contents and gizzard materials were investigated as representing the ingested items. No difference of Pb concentration was observed in major foods (maize and/or wheat) of crop contents in the study sites except Busan, whereas variations of Pb levels in gizzard materials were indicative of a similar pattern with tissue Pb differences. The Pb concentration in tissues of pigeons did not correspond well to the atmospheric Pb levels. With regard to possible Pb sources, ingested items especially materials present in the gizzard are important sources for Pb contamination to pigeons because Pb-containing sources may be expected to present in roadside particles, dusts, paint chips and building flakes. However, air Pb value being low may not affect significant as the regional variations in tissues of pigeons.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

Whole Effluent Toxicity (WET) Tests on Wastewater Treatment Plants with Daphnia magna and Selenastrum capricornutum

Whole effluent toxicity (WET) tests, with Daphnia magna and Selenastrum capricornutum, were introduced to evaluate the biological toxicities of effluents from the wastewater treatment plants (WWTPs) in Korea. In WET tests of WWTPs effluents, 33.3% (33/99) for D. magna and 92.6% (75/81) for S. capricornutum revealed greater than 1 toxic unit (TU), even though all the treatment plants investigated were operating in compliance with the regulations, as assessed using conventional monitoring methods (i.e., BOD and total concentration of N or P, etc). There were only minor differences in toxicities according to the types of influents (municipal and agro-industrial) in all treatment plants. However, the effluents treated by an activated sludge treatment process were found to exhibit significantly lower toxicity than those treated by rotating biological contactor (RBC) and extended aeration processes. The seasonal variations in the toxicity were lower in the summer compared to winter, which may have been due to the rainfall received to the sewage intake system during the former period. The impact of WET on river water was also investigated based on the discharge volume. At sites A and B, the total impact of toxicity to stream and river waters was observed to be 70.9% and 90.4% for D. magna and S. capricornutum, respectively. The other four small treatment plants (sites F, G, H and I), with relative discharging volumes between 0.001 and 0.002, contribute less than 1% to the total toxicity.     

Rapid in situ assessment for predicting soil quality using an algae-soaked disc seeding assay

The soil quality of remediated land is altered and this land consequently exerts unexpected biological effects on terrestrial organisms. Therefore, field evaluation of such land should be conducted using biological indicators. Algae are a promising new biological indicator since they are a food source for organisms in higher soil trophic levels and easily sampled from the soil. Field evaluation of soil characteristics is preferred to be testing in laboratory conditions because many biological effects cannot be duplicated during laboratory evaluations. Herein, we describe a convenient and rapid algae-soaked disc seeding assay for assessing soil quality in the field based on soil algae. The collection of algae is easy and rapid and the method predicts the short-term quality of contaminated, remediated, and amended farm and paddy soils. The algae-soaked disc seeding assay is yet to be extensively evaluated, and the method cannot be applied to loamy sand soil in in situ evaluations. The algae-soaked disc seeding assay is recommended for prediction of soil quality in in situ evaluations because it reflects all variations in the environment. The algae-soaked disc seeding assay will help to develop management strategies for in situ evaluation.     

Application of phosphate-solubilizing bacteria for enhancing bioavailability and phytoextraction of cadmium (Cd) from polluted soil

In this study, phosphate-solubilizing bacteria (PSB), Bacillus megaterium, were used to enhance Cd bioavailability and phytoextractability of Cd from contaminated soils. This strain showed a potential for directly solubilizing phosphorous from soils more than 10 folds greater than the control without inoculation. The results of pot experiments revealed that inoculation with B. megaterium significantly increased the extent of Cd accumulation in Brassica juncea and Abutilon theophrasti by two folds relative to the uninoculated control. The maximum Cd concentrations due to inoculation were 1.6 and 1.8 mg Cd g⁻¹ plant for B. juncea and A. theophrasti after 10 wk, respectively. The total biomass of A. theophrasti was not significantly promoted by the inoculation treatment, yet the total biomass of B. juncea increased from 0.087 to 0.448 g. It is also worth to mention that B. juncea predominantly accumulates Cd in its stems (39%) whereas A. theophrasti accumulates it in its leaves (68%) after 10 wk. The change of the Cd speciation indicated that inoculation of B. megaterium as PSB increased the bioavailabilty of Cd and consequently enhanced its uptake by plants. The present study may provide a new insight for improving phytoremediation using PSB in the Cd-contaminated soils.     

Passive air monitoring of PCBs and PCNs across East Asia: a comprehensive congener evaluation for source characterization

A comprehensive congener specific evaluation of polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) in the atmosphere was conducted across East Asia in spring 2008, applying polyurethane foam (PUF) disk passive air sampler (PAS) as monitoring device. Mean concentrations derived for Japan, China and Korea were 184 ± 24, 1100 ± 118, and 156 ± 20 pg m⁻³ for ∑₂₀₂ PCBs, and 9.5 ± 1.5, 61 ± 6, and 16 ± 2.4 pg m⁻³ for ∑₆₃ PCNs, respectively. Relative to reported data from 2004, the present results suggest that air PCBs concentrations have not changed much in Japan and Korea, while it has increased by one order of magnitude in China. From principal component analysis, combustion emerged highly culpable in contemporary emissions of both PCBs and PCNs across the East Asian sub-region. Another factor derived as important to air PCBs was re-emissions/volatilization. Signals from PCBs formulations were also picked, but their general importance was virtually consigned to the re-emissions/volatilization tendencies. On the contrary, counterpart PCNs formulations did not appear to contribute much to air PCNs.     

Influence of HCl on oxidation of gaseous elemental mercury by dielectric barrier discharge process

The influence of HCl on the oxidation of gaseous elemental mercury (Hg0) has been investigated using a dielectric barrier discharge (DBD) plasma process, where the temperature of the plasma reactor and the composition of gas mixtures of HCl, H2O, NO, and O2 in N2 balance have been varied. We observe that Cl atoms and Cl2 molecules, created by the DBD process, play important roles in the oxidation of Hg0 to HgCl2. The addition of H2O to the gas mixture of HCl in N2 accelerates the oxidation of Hg0, although no appreciable effect of H2O alone on the oxidation of Hg0 has been observed. The increase of the reaction temperature in the presence of HCl results in the reduction of Hg0 oxidation efficiency probably due to the deterioration of the heterogeneous chemical reaction of Hg0 with chlorinated species on the reactor wall. The presence of NO shows an inhibitory effect on the oxidation of Hg0 under DBD of 16% O2 in N2, indicating that NO acts as an O and O3 scavenger. At the composition of Hg0 (280 microg m(-3)), HCl (25 ppm), NO (204 ppm), O2 (16%) and N2 (balance) and temperature 90 degrees C, we obtain the nearly complete oxidation of Hg0 at a specific energy density of 8 J l(-1). These results lead us to suggest that the DBD process can be viable for the treatment of mercury released from coal-fired power plants.     

Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea

An end-of-life vehicle (ELV) is dismantled to recover and recycle any re-usable parts, then shipped to the shredding facility for further recovery of iron with any remaining Automobile Shredder Residue (ASR) to be considered as wastes and to be disposed of by either thermal treatment or landfill. Overall ELVs management status in Korea, including recycling resulting from the dismantling processes, was surveyed using some questionnaires given to dismantlers and other available information to provide some feasible means for future treatment. The averaged recycle rate in the dismantling stage showed a value of 44% and the rest of an ELV was then compressed and transported to shredding companies to recover mainly the iron content which averaged 38.7% of the mass of a new vehicle. The non-ferrous metals such as copper, antimony, zinc and aluminum accounted for only 1.5%. The Shredder dusts (SDs) were found to be composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. Dumping of fluff and inorganic residues into a landfill site, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car as done in European countries and Japan. The detailed characteristics of SDs were investigated to provide an idea of how to treat them in order to meet a future expected enforcement.     

Human health risk assessment of explosives and heavy metals at a military gunnery range

In this research, a risk assessment was undertaken in order to develop the remediation and management strategy of a contaminated gunnery site, where a nearby flood controlling reservoir is under construction. Six chemicals, including explosives and heavy metals, posing potential risk to environmental and human health, were targeted in this study. A site-specific conceptual site model was constructed, based on effective, reasonable exposure pathways, to avoid any overestimation of the risk. Also, conservative default values were adapted to prevent underestimation of the risk when site-specific values were not available. The risks posed by the six contaminants were calculated using the API’s Decision Support System for Exposure and Risk Assessment, with several assumptions. In the crater-formed-area (Ac), the non-carcinogenic risks (i.e., HI values) of tri-nitro-toluene (TNT) and Cd were slightly larger than 1, but for RDX (Royal Demolition Explosives) was over 50. The total non-carcinogenic risk of the whole gunnery range was calculated to be 62.5, which was a significantly high value. The carcinogenicity of Cd was estimated to be about 10⁻³, while that for Pb was about 5 × 10⁻⁴, which greatly exceeded the generally acceptable carcinogenic risk level of 10⁻⁴–10⁻⁶. It was concluded from the risk assessment that there is an immediate need for remediation of both carcinogens and non-carcinogens before construction of the reservoir. However, for a more accurate risk assessment, further specific estimations of the changes in environmental conditions due to the construction of the reservoir will be required; and more over, the effects of the pollutants to the ecosystem will also need to be evaluated.