Reducing sediment and phosphorus in tributary waters with alum and polyacrylamide

The Salton Sea is the largest inland water body in California, covering an area of 980 km(2). Inflow to the Salton Sea (1.6 km(3) yr(-1)) is predominately nutrient-rich agricultural wastewater, which has led to eutrophication. Because internal phosphorus release from the bottom sediments is comparatively low and external phosphorus loading to the Salton Sea is high, reduction of tributary phosphorus is expected to reduce algal blooms, increase dissolved oxygen, and reduce odors. Removing both dissolved phosphorus and phosphorus-laden sediment from agricultural drainage water (ADW) should decrease eutrophication. Both alum and polyacrylamide (PAM) are commonly used in wastewater treatment to remove phosphorus and sediment and were tested for use in tributary waters. Laboratory jar tests determined PAM effectiveness (2 mg L(-1)) for turbidity reduction as cationic > anionic = nonionic. Although cationic PAM was the most effective at reducing turbidity at higher speeds, there was no observed difference between the neutral and anionic PAMs at velocity gradients of 18 to 45 s(-1). Alum (4 mg L(-1) Al) reduced turbidity in low energy systems (velocity gradients < 10 s(-1)) by 95% and was necessary to reduce soluble phosphorus, which comprises 47 to 100% of the total P concentration in the tributaries. When PAM was added with alum, the anionic PAM became ineffective in aiding flocculation. The nonionic PAM (2 mg L(-1)) + alum (4 mg L(-1) Al) is recommended to reduce suspended solids in higher energy systems and reduce soluble P by 93%.     

Effects of Nitrogen Supply on the Sensitivity to O3 of Growth and Photosynthesis of Japanese Beech (Fagus crenata) Seedlings

To obtain basic information for evaluating critical levels of O₃ under different nitrogen loads for protecting Japanese beech forests, two-year-old seedlings of Fagus crenata Blume were grown in potted andisol supplied with N as NH₄NO₃ solution at 0, 20 or 50 kg ha⁻¹ year⁻¹ and exposed to charcoal-filtered air or O₃ at 1.0, 1.5 and 2.0 times the ambient concentration from 16 April to 22 September 2004. The O₃ induced significant reductions in the whole-plant dry mass, net photosynthetic rate at 380 μmol mol⁻¹ CO₂ (A ₃₈₀), carboxylation efficiency (CE) and concentrations of ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) and total soluble protein (TSP) in the leaves. The concentrations of Rubisco and TSP were negatively correlated with the concentration of leaf acidic amino acid, suggesting that O₃ enhanced the degradation of protein such as Rubisco. The N supply to the soil did not significantly change the whole-plant dry mass and A ₃₈₀, whereas it significantly increased the CE and concentrations of Rubisco and total amino acid. No significant interactive effects of O₃ and N supply to the soil were detected on the growth, photosynthetic parameters and concentrations of protein and amino acid in the leaves. In conclusion, N supply to the soil at ≤50 kg ha⁻¹ year⁻¹ does not significantly change the sensitivity to O₃ of growth and net photosynthesis of Fagus crenata seedlings.     

Business frameworks for sustainable society: a case study on reuse industries in Japan

This paper presents a new perspective on the reuse businesses of independent reuse business companies (IRBCs) in Japan. A majority of previous studies on reuse and remanufacturing have focused on the businesses of original equipment manufacturers (OEMs). During the past twenty years, however, in Japan, IRBCs have grown rapidly, especially those that launched new types of secondhand shops. The author proposes that the reuse businesses of IRBCs can provide useful information for academics, OEMs, and policy makers. A key finding is the strategies developed by IRBCs to ensure the volume of used products collected and to stimulate demand for used products. This paper compares the features of IRBC reuse businesses with those of OEMs, and discussed the results and implications of an interview survey with select IRBCs.     

Regulation of non-point source pollution under n-firm Bertrand competition

Environmental Economics and Policy Studies - This study demonstrates the conditions under which an increase in the ambient charge positively or negatively affects the total level of non-point...     

Partitioning between soluble and insoluble fractions of major and trace elements in size-classified airborne particulate matter collected in Tokyo

Airborne particulate matter (APM) is a major air pollutant, and the effect on human health of fine APM (PM2.5) deposited deep inside the lungs has recently become a serious concern. Moreover, soluble constituents may leach from APM, and intensify some health disorders. To identify the soluble chemical constituents of APM, size-classified APM was sampled in central Tokyo, and the elemental compositions of the water-soluble, acid-soluble and insoluble fractions were investigated. The extraction procedure was validated by calculating the mass balance of soluble and insoluble fractions of a standard APM reference material (NIST SRM 1648). Among the major elements, Fe and Ti in APM of all size classes and K in coarse APM were distributed primarily in the insoluble fraction and were inferred to be present as oxides or silicates, whereas Na and Mg in all size classes and K in fine APM were primarily in the water-soluble fraction and were inferred to be have originated mainly from sea salt. Among the trace elements, Zn and Cd in the fine APM (d < 2 microm) had large enrichment factors, indicating an anthropogenic origin, and were distributed primarily in the water-soluble fraction. When fine anthropogenic APM enters into the lungs, leached toxic elements, such as Cd, may adversely affect health. The higher the bonding energy of the monoxide molecule of the element was, the higher its distribution ratio was in the water-soluble fraction. Therefore, many metallic elements in APM were inferred to be present as oxygen-bonded compounds.     

Physicochemical characteristics of carbonaceous adsorbent for dioxin-like polychlorinated biphenyl adsorption

It has been known that dioxin-like polychlorinated biphenyls (DL-PCBs) are present in almost all types of environments worldwide. Activated carbon treatment has been expected for the removal of DL-PCBs because it is a simple and low-cost removal technology. In the present study, the physicochemical properties of activated carbon were investigated to identify the characteristics of 16 different types of activated carbon on adsorption properties for DL-PCBs. To accomplish this, micropore volume, and pore diameter were calculated by t-plot analysis and the mesopore volume was analyzed by the Barrett-Joyner-Halenda (BJH) method. In addition, the Brunauer-Emmett-Teller (BET) surface area, pH, metal elements, and surface acid functional groups were analyzed. Then, adsorption experiments using DL-PCB in hexane solution were conducted, and the relationship between adsorption and physicochemical properties of activated carbon was investigated. The results showed that activated carbons having a surface area of 700-1200 m² g⁻¹ and micropores with diameters of about 0.7-0.8 nm exhibited high activity for the adsorption of PCBs. The results also clearly showed that the mesopore volume of activated carbon influenced the adsorption rate and the equilibrium adsorption.     

Inundation Analysis in the Coastal Area Considering Climate Change Due to Global Warming

This paper describes the possible inundation scenarios under sea level rise conditions due to global climate change with particular reference to Nagoya, Japan. The study was carried out by using a two-dimensional sea model integrated with one-dimensional river flow model and two-dimensional overland flow model. For the connections of models, the upstream discharge or downstream water level in each grid is considered as the boundary conditions. The governing equations used for the analysis have been solved by finite volume method. The analysis results implicate that some parts of densely populated coastal area of Nagoya city will be vulnerable to inundation if the sea level rise due to global warming by 1 m. Moreover, the performances of existing sewer system and inundation scenario under various conditions have been analyzed.     

The Fukushima Nuclear Power Plant accident and exposures in the environment

The Great East Japan Earthquake has occurred on March 11, 2011, in the Tohoku District of Japan. Due to the earthquake, big tsunamis were induced, and they rushed to the Fukushima Nuclear Power Stations, causing severe accidents. Radioactive materials including I-131, Cs-137 and so on were emitted from the plant to the environment. The Japanese government, Fukushima prefectural government and other local governments have struggled against the accidents. The restricted area and deliberate evacuation area are set by the government, and the residents are evacuated. The dose rates in and around Fukushima Prefecture have been monitored by the governments and other involved organizations. Fukushima government has started the health management survey for all residents in Fukushima Prefecture including the questions on their activities for the estimations of their external doses.