Characteristics of electrolysis, ozonation, and their combination process on treatment of municipal wastewater.

The characteristics of municipal wastewater treatment by electrolysis, ozonation, and combination processes of electrolysis and aeration using three gaseous species (nitrogen [N2], oxygen [O2], and ozone [O3]) were discussed in this research using ruthenium oxide (RuO2)-coated titanium anodes and stainless-steel (SUS304) cathodes. Electrolysis and electrolysis with nitrogen aeration were characterized by a rapid decrease in 5-day biochemical oxygen demand (BODs) and total nitrogen and a slow decrease in chemical oxygen demand (COD). In contrast, ozonation, electrolysis with oxygen aeration, and electrolysis with ozone aeration were characterized by transformation of persistent organic matter to biodegradable matter and preservation of total nitrogen. The best energy efficiency in removing BOD5 and total nitrogen was demonstrated by electrolysis, as a result of direct anodic oxidation and indirect oxidation with free chlorine produced from the chloride ion (Cl-) at the anodes. However, electrolysis with ozone aeration was found to be superior to the other processes, in terms of its energy efficiency in removing COD and its ability to remove COD completely, as a result of hydroxyl radical (*OH) production via cathodic reduction of ozone.     

Factors affecting the degradation of amoxicillin in composting toilet

The biological and non-biological factors that affect the degradation of amoxicillin in the composting process of feces have been investigated. The effect of living bacteria and the enzyme (beta-lactamase) on amoxicillin decay was examined, and our results indicated that the biological effects are likely to be negligible. Consequently, the effect of phosphate, ammonia and pH level as non-biological factors was investigated by monitoring the reduction rate of amoxicillin in phosphate and ammonia buffer solutions with several pH levels. Each reduction rate constant was integrated by a simulation model, and the each calculated amoxicillin reduction profile was compared to the reduction profiles of amoxicillin in the composting process of feces. The calculated results corresponded almost exactly to the experimental profiles. We therefore concluded that the degradation of amoxicillin in a toilet matrix was dependent on the concentration of ammonia, phosphate and hydroxyl ion.     

Assessing the removal potential of soil-aquifer treatment system (soil column) for endotoxin

Soil-aquifer treatment (SAT) of wastewater is an increasingly valued practice for replenishing aquifers due to ease of operation and low maintenance needs and therefore low cost. In this study, we investigated the fate of endotoxins through laboratory-scale SAT soil columns over a four month period. The effluent of rapid sand filtration was run through the columns under gravity flow conditions. Four SAT columns were packed with four different filter materials (fine sand, medium sand, coarse sand and very coarse sand). The effluent of rapid sand filtration (average dissolved organic carbon (DOC) = 4 mg l(-1) and average endotoxin concentration = 4 EU ml(-1)) was collected from a domestic wastewater treatment plant in Sapporo, Japan. DOC removal ranged from 12.5% to greater than 22.5% during the study, with DOC levels averaging 3.1 and 3.5 mg l(-1) for the SAT columns packed with different soils. Endotoxin transformation exhibited different profiles, depending on the time and soil type. Reduction in endotoxin concentration averaged 64.3% and was as high as 86.7% across the soil columns 1, 2, 3 and 4, respectively. While DOC removal was gradual, the reductions in endotoxin levels were rather rapid and most of the removal was achieved in the top layers. Soil with a larger grain size had lower efficiency in removing endotoxin. Tests were performed to evaluate the transformation of organic matter showing endotoxicity and to determine the mechanisms responsible for changes in the structural and size properties of dissolved organic matter (OM) during SAT. Dissolved OM was fractionated using Sep-Pack C18 Cartridges into hydrophobic and hydrophilic fractions. Dialysis tubes with different molecular weight cut-offs were used to perform size fractions of OM showing endotoxicity. Evaluation of the transformation of organic matter showing endotoxicity during SAT indicated that both hydrophobic and large molecules were reduced. Moreover, experimental findings showed that adsorption test data fit to the Freundlich isotherm and were affected by the particle grain size with higher adsorption capacity for fine and medium sand.     

Adsorptive removal and photocatalytic decomposition of sulfamethazine in secondary effluent using TiO2–zeolite composites

We investigated the adsorption and decomposition of sulfamethazine (SMT), which is used as a synthetic antibacterial agent and discharged into environmental water, using high-silica Y-type zeolite (HSZ-385), titanium dioxide (TiO₂), and TiO₂–zeolite composites. By using ultrapure water and secondary effluent as solvents, we prepared SMT solutions (10 μg/L and 10 mg/L) and used them for adsorption and photocatalytic decomposition experiments. When HSZ-385 was used as an adsorbent, rapid adsorption of SMT in the secondary effluent was confirmed, and the adsorption reached equilibrium within 10 min. The photocatalytic decomposition rate using TiO₂ in the secondary effluent was lower than that in ultrapure water, and we clarified the inhibitory effect of ions and organic matter contained in the secondary effluent on the reaction. We synthesized TiO₂–zeolite composites and applied them to the removal of SMT. During the treatment of 10 μg/L SMT in the secondary effluent using the composites, 76 % and more than 99 % of the SMT were decomposed within 2 and 4 h by photocatalysis. The SMT was selectively adsorbed onto high-silica Y-type zeolite in the composites. Resultantly, the inhibitory effect of the coexisting materials was reduced, and the composites could remove SMT more effectively compared with TiO₂ alone in the secondary effluent.     

Voltammetric response of ferroceneboronic acid to diol and phenolic compounds as possible pollutants

A voltammetric determination of possible organic pollutants such as diol and phenolic compounds in water was studied using ferroceneboronic acid (FBA) as a redox-active marker. A cyclic voltammogram of FBA exhibited a pair of oxidation and reduction peaks at 230 and 170 mV at pH 7.0, respectively, while another pair of redox peaks was observed in the presence of diol or phenolic compounds tested. The results were rationalized based on the formation of boronate esters of FBA with the added compounds. The changes in the redox peak currents were dependent on the concentration of the additives, suggesting a usefulness of FBA in the electrochemical determination of these compounds in water.     

Bioelectrochemical conversion of urea to nitrogen using aminated carbon electrode

Urea decomposes to ammonia and carbon dioxide via carbamic acid, and amine groups can be introduced to the glassy carbon electrode surface during the electrode oxidation of carbamic acid. This modified carbon electrode has excellent catalytic activity of the oxidation of carbamic acid, and can be used to electrooxidize urea by combining urease reaction and electrode oxidation. We found that nitrogen gas is finally produced by the carbamic acid produced from urea. The production of nitrogen was confirmed by gas chromatography-mass spectrometry, and fragment pattern of hydrazine was also detected in the electrolyzed solution of urea. We intend to describe new electrochemical conversion system of urea to harmless nitrogen gas. The electrode oxidation current of urea was decreased by addition of radical trapping agent such as DMPO (5,5-dimethyl-1-pyrroline N-oxide), and this fact suggests that carbamic acid radical couples to form nitrogen-nitrogen bond, and this dimer is oxidized to nitrogen. The electrode oxidation current of urea became larger when oxygen was removed. This fact indicates that the intermediate species (probably hydrazine) produced by the electrolysis is oxidized by not only electrode reaction but also oxygen.     

Reproductive disturbance of Japanese bumblebees by the introduced European bumblebee Bombus terrestris

The European bumblebee, Bombus terrestris, is an invasive eusocial species whose distribution is expanding greatly beyond its native range because numerous colonies are imported to or locally produced in non-native countries for pollination of agricultural crops. Closely related species exist in Japan where the unrestricted import and use of B. terrestris has resulted in the establishment of wild colonies. Laboratory studies previously showed that B. terrestris and Japanese native species can copulate and produce fertilized eggs. Although these eggs do not hatch, the interspecific mating can cause a serious reproductive disturbance to native bumblebees. In this study, we determined the frequencies of interspecies mating between B. terrestris males and native bumblebee queens in the wild on the islands of Hokkaido and Honshu by analyzing the DNA sequences of spermatozoa stored in spermathecae of native queens. We found that 20.2% of B. hypocrita hypocrita queens and 30.2% of B. hypocrita sapporoensis queens had spermatozoa of B. terrestris males in their spermathecae. Given that a Bombus queen generally mates only once in her life, such high frequencies of interspecific mating with B. terrestris pose serious threats to the populations of native bumblebees in Japan.     

Jig separation of crushed automobile shredded residue and its evaluation by float and sink analysis

Automobile shredded residue is a potential solid fuel when its metal and chloride-containing components have been removed. The authors have investigated physical separation of automobile shredded residue to isolate components that may be used as solid fuel and reported that agglomerates of entangling fiber-like material are formed during crushing. These agglomerates make removal of metals and chloride-containing components difficult, and the paper proposes a treatment flowchart consisting of separate treatments of the coarse size fraction containing entangling fiber-like components and the smaller size fraction containing particulate matter. This paper reports the treatment of the smaller size fraction treated with jigging to obtain a low-ash and low-chloride-content product. A new washability curve was developed based on float and sink analysis test results, and it was applied to estimate the gravity separation performance of treatments such as jigging and dense medium separation. The estimated results show good agreement with the experimental results of jig separation.