Influence of burning of fireworks on particle size distribution of PM<Subscript>10</Subscript> and associated Barium at Nagpur

Influence of burning of fireworks on particle size distribution of PM₁₀ and associated barium (Ba) were studied at a congested residential cum commercial area of Nagpur city, India. Sampling was carried out by cascade impactor having 50% cut-off aerodynamic diameters of <10, 9, 5.8, 4.7, 3.3, 2.1, 1.1, 0.7, and <0.4 μm, 2 days before diwali, during diwali, celebrations of marriage functions, and New Year’s Eve. Noticeably, increased levels of PM₁₀ and Ba were observed during diwali as compared to days before diwali and other activities. PM₁₀ levels were increased by four to nine times whereas Ba levels were increased by eight to 20 times higher in alveolar region, when compared with the levels observed before diwali. Probability of deposition of Ba mass in alveolar region varied between 14 and 27 ng/h with higher deposition when the burning of fireworks activity was lower near the site. Trimodal distribution of Ba was observed on the first 2 days of diwali at 0.4–2.1, 2.1–4.7, and 4.7 to less than PM₁₀ micrometer range. While on the third day, it appeared bimodal with 70% contribution in coarse fraction whereas on the fourth day, distribution appeared unimodal with 66% contribution in alveolar region (<0.4–1.1 μm). Distribution of Ba varied with respect to particle size, in accordance with the intensity of the fireworks used on different days and distance between the burning of firecrackers from the monitoring site.     

Iron content in groundwaters of Visakhapatnam environs, Andhra Pradesh, India

Trace elements are essential for human health. However, excess concentrations of these elements cause health disorders. A study has been carried out in Visakhapatnam environs, Andhra Pradesh, India to ascertain the causes for the origin and distribution of iron content in the groundwaters. Fifty groundwater samples are collected and analyzed for iron. The content of iron ranges from 400 to 780 μg/l. A comparison of groundwater data with rock and soil chemistry suggests that the concentration of iron (400–530 μg/l) in the groundwaters is derived from the rocks and soils due to geogenic processes. This concentration is taken as a natural occurrence of iron in the groundwaters of the study area for assessing the causes for its next higher content (>530 μg/l). Relatively higher concentration of iron (540–550 μg/l) is observed at some well waters, where the wells are located nearby municipal wastewaters, while the very high concentration of iron (610–780 μg/l) is observed in the industrially polluted groundwater zones, indicating the impact of anthropogenic activities on the groundwater system. These activities mask the concentration of iron caused by geogenic origin. Hence, both the geogenic and anthropogenic activities degrade the groundwater quality. Drinking water standards indicate that the iron content in all the groundwater samples exceeds the permissible limit (300 μg/l) recommended for drinking purpose, causing the health disorders. Necessity of close monitoring of groundwater quality for assessing the impact of geogenic and anthropogenic sources with reference to land use/land cover activities is emphasized in the present study area to protect the groundwater resources from the pollution.     

用SOS/Umu生物测试评价北方某自来水厂对遗传毒性物质的去除效果

大量研究表明,饮用水中存在着能导致遗传毒性的物质,在我国许多水厂水质检测能力有限的前提下,生物毒性指标作为反映有毒物质综合指标具有重要的现实意义.本研究应用SOS/Umu生物毒性测试评价了北方某市一自来水厂的A、B、C、D 4套试验工艺在不同的季节(冬春两季)各工艺段出水的遗传毒性效应.结果显示,冬春两季地表水加氯后遗传毒性效应均显著增加,冬季间接遗传毒性效应高于春季;活性炭吸附对去除遗传毒性物质效果显著,但后期加氯使遗传毒性效应增加;冬春两季比较,以及地下水和地表水比较,各工艺出水的遗传毒性效应差别很大.通过研究表明,本研究所应用的生物毒性测试SOS/Umu能够快速、准确地对水厂工艺过程中致突变物质的处理效果进行评价,能对工艺改进提出指导,是自来水质安全性评价的重要补充手段.     

Diethanolamides of Castor Oil as Polyols for the Development of Water-Blown Polyurethane Foam

Castor oil was chemically modified into a diethanolamide by a two step process. The first step was the hydroxylation of double bonds in castor oil and second step was the transamidation using diethanolamine to increase the hydroxyl value. Water blown polyurethane foams were developed with this castor oil based polyol using polypropylene glycol of molecular weight 1,000 as the copolyol and polymeric MDI. The density and mechanical properties namely compression and flexural strength depended on the composition of the foam formulation. The hydroxyamide content and molecular weight of commercial polyol had significant effect on the micro structure as observed by optical microscopy.     

Analysis and characterization of cultivable heavy metal-resistant bacterial endophytes isolated from Cd-hyperaccumulator Solanum nigrum L. and their potential use for phytoremediation

This study investigates the heavy metal-resistant bacterial endophytes of Cd-hyperaccumulator Solanum nigrum L. grown on a mine tailing by using cultivation-dependent technique. Thirty Cd-tolerant bacterial endophytes were isolated from roots, stems, and leaves of S. nigrum L. and classified by amplified ribosomal DNA-restriction analysis into 18 different types. Phylogenetic analysis based on 16S rDNA sequences showed that these isolates belonged to four groups: Actinobacteria (43%), Proteobacteria (23%), Bacteroidetes (27%) and Firmicutes (7%). All the isolates were then characterized for their plant growth promoting traits as well as their resistances to different heavy metals; and the actual plant growth promotion and colonization ability were also assessed. Four isolates were re-introduced into S. nigrum L. under Cd stress and resulted in Cd phytotoxicity decrease, as dry weights of roots increased from 55% to 143% and dry weights of above-ground from 64% to 100% compared to the uninoculated ones. The total Cd accumulation of inoculated plants increased from 66% to 135% (roots) and from 22% to 64% (above-ground) compared to the uninoculated ones. Our research suggests that bacterial endophytes are a most promising resource and may be the excellent candidates of bio-inoculants for enhancing the phytoremediation efficiency.     

Evaluation and assessment of 25 years of environmental radioactivity monitoring data at Tarapur (India) nuclear site

The evaluation and assessment of monitoring data generated over a period of 1983-2007 (25 years) of a nuclear facility is presented. Time trends of particulate radioactivity, correlation between ¹³⁷Cs in discharge canal seawater and station discharged activity and correlation of ¹³⁷Cs, ⁶⁰Co, and ¹³¹I in marine species such as sponge and Nerita (gastropod) and corresponding discharged activity are discussed. The concentration of ¹³⁷Cs and ¹³¹I in seawater versus biota are discussed. A good correlation between ¹³⁷Cs in seawater and ¹³⁷Cs in liquid waste discharged was observed (R² = 0.8, p < 0.001). Similarly, correlation was good for Nerita and discharged concentration of ¹³⁷Cs, ¹³¹I and ⁶⁰Co (R² = 0.55-0.73 and p < 0.001). The measurements over the years indicated that there is no accumulation of radionuclides in either the terrestrial or aquatic environments. The mean ¹³⁷Cs decreased from the pre-operational levels: 7.0-3.6 Bq kg⁻¹ in soil, 0.91-0.016 Bq L⁻¹ in milk and 0.28-0.036 Bq kg⁻¹ in vegetation. Similarly, the mean ⁹⁰Sr in these matrixes decreased from 3.9 to 0.26 Bq kg⁻¹; 0.37-0.011 Bq L⁻¹ and 0.34-0.022 Bq kg⁻¹ respectively. Cesium-137 of about 700 μBq m⁻³ was measured in the air filter disks during 1986 and there was a decrease of three orders of magnitude in concentration over the 25 years. The evaluation of environmental data indicated that the radionuclide concentrations and potential impacts, in terms of effective dose to the members of public, have significantly reduced since 1969.     

Detecting and Tracking Changes in Ozone Air Quality

This paper presents a statistical method for filtering out or moderating the influence of meteorological fluctuations on ozone concentrations. Use of this technique in examining trends in ambient ozone air quality is demonstrated with ozone data from a monitoring location in New Jersey. The results indicate that this method can detect changes in ozone air quality due to changes in emissions in the presence of meteorological fluctuations. This method can be useful in examining the effectiveness of regulatory initiatives in improving ozone air quality.     

Stabilization and Solidification of Metal-Laden Wastes by Compaction and Magnesium Phosphate-Based Binder

ABSTRACT

Bench-scale and full-scale investigations of waste stabilization and volume reduction were conducted using spiked soil and ash wastes containing heavy metals such as Cd, Cr, Pb, Ni, and Hg. The waste streams were stabilized and solidified using chemically bonded phosphate ceramic (CBPC) binder, and then compacted by either uniaxial or harmonic press for volume reduction. The physical properties of the final waste forms were determined by measuring volume reduction, density, porosity, and compressive strength. The leachability of heavy metals in the final waste forms was determined by a toxicity characteristic leaching procedure (TCLP) test and a 90-day immersion test (ANS 16.1). The structural composition and nature of waste forms were determined by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively.

CBPC binder and compaction can achieve 80-wt % waste loading and 39-47% reduction in waste volume. Compressive strength of final waste forms ranged from 1500 to 2000 psi. TCLP testing of waste forms showed that all heavy metals except Hg passed the TCLP limits using the phosphate-based binder. When Na₂S was added to the binder, the waste forms also passed TCLP limits for Hg. Long-term leachability resistance of the final waste forms was achieved for all metals in both soil and ash wastes, and the leachability index was ~14. XRD patterns of waste forms indicated vermiculite in the ash waste was chemically incorporated into the CBPC matrix. SEM showed that waste forms are layered when compacted by uniaxial press and are homogeneous when compacted by harmonic press.     

Washing of Marine Coastal Sand in a Batch Reactor: Sorption and Desorption of BTEX

ABSTRACT

This study addresses the issues related to decontamination of marine beach sand accidentally contaminated by petroleum products. Sorption and desorption of BTEX (i.e., benzene, toluene, ethylbenzene, and xylene) onto the sand from Uran Beach, located near the city of Mumbai, India, were studied, and isotherms were determined using the bottle point method to estimate sorption coefficients. Alternatively, QSARs (i.e., quantitative structure activity relationships) were developed and used to estimate the sorption coefficients. Experiments for kinetics of volatilization as well as for kinetics of sorption and desorption in the presence of volatilization were conducted in a fabricated laboratory batch reactor. A mathematical model describing the fate of volatile hydrophobic organic pollutants like BTEX (via sorption and desorption in presence of volatilization) in a batch sediment-washing reactor was proposed. The experimental kinetic data were compared with the values predicted using the proposed models for sorption and desorption, and the optimum values of overall mass transfer coefficients for sorption (K_sa_s) and desorption (K_da_d) were estimated.This was achieved by minimization of errors while using the sorption coefficients (K_p) obtained from either laboratory isotherm studies or the QSARs developed in the present study. Independent experimental data were also collected and used for calibration of the model for volatilization,and the values of the overall mass transfer coefficient for volatilization (K_ga_g) were estimated for BTEX. In these exercises of minimization of errors, comparable cumulative errors were obtained from the use of K_p values derived from experimental isotherms and QSARs.