Discrepancies in the acute versus chronic toxicity of compounds with a designated narcotic mechanism

In this study, it was illustrated that even for certain simple organic compounds with a designated mode of action (MOA) (i.e. narcotic toxicity) unexpected differences in acute and chronic toxicity can be observed. In a first part of the study, species sensitivity distributions (SSDs) based on either acute or chronic toxicity data of three narcotic test compounds (methanol, ethanol and 2-propanol) were constructed. The results of the acute SSDs were as expected for narcotic compounds: rather similar sensitivity and small differences in toxicity were observed among different species. On the contrary, the chronic SSDs of methanol and ethanol indicated larger interspecies variation in sensitivity. Furthermore, the chronic toxicity trend (ethanol > methanol > 2-propanol) was unexpectedly different from the acute toxicity trend (2-propanol > ethanol > methanol) and acute versus chronic extrapolation could not be successfully described for methanol and ethanol using an ACR of 10 (as suggested for narcotic compounds). In contrast to the interspecies approach in the first part of this study, the second part of the study was focused on the assessment of acute and chronic toxicity of the three test compounds in Daphnia magna, which was identified as one of the most sensitive organisms to methanol and ethanol. Here, the differences in acute and chronic toxicity trend were in accordance to the results of the SSDs. The enhancement of membrane penetration due to the small molecular size of methanol and ethanol, in combination with the higher toxicity of their respective biotransformation products were suggested as potential causes of the increased chronic toxicity. Furthermore, it was stressed that larger awareness of these irregularities in acute to chronic extrapolations of narcotic compounds is required and should receive additional attention in further environmental risk assessment procedure.     

Chemcatcher and DGT passive sampling devices for regulatory monitoring of trace metals in surface water

This work aimed to evaluate whether the performance of passive sampling devices in measuring time-weighted average (TWA) concentrations supports their application in regulatory monitoring of trace metals in surface waters, such as for the European Union's Water Framework Directive (WFD). The ability of the Chemcatcher and the diffusive gradient in thin film (DGT) device sampler to provide comparable TWA concentrations of Cd, Cu, Ni, Pb and Zn was tested through consecutive and overlapping deployments (7-28 days) in the River Meuse (The Netherlands). In order to evaluate the consistency of these TWA labile metal concentrations, these were assessed against total and filtered concentrations measured at relatively high frequencies by two teams using standard monitoring procedures, and metal species predicted by equilibrium speciation modeling using Visual MINTEQ. For Cd and Zn, the concentrations obtained with filtered water samples and the passive sampling devices were generally similar. The samplers consistently underestimated filtered concentrations of Cu and Ni, in agreement with their respective predicted speciation. For Pb, a small labile fraction was mainly responsible for low sampler accumulation and hence high measurement uncertainty. While only the high frequency of spot sampling procedures enabled the observation of higher Cd concentrations during the first 14 days, consecutive DGT deployments were able to detect it and provide a reasonable estimate of ambient concentrations. The range of concentrations measured by spot and passive sampling, for exposures up to 28 days, demonstrated that both modes of monitoring were equally reliable. Passive sampling provides information that cannot be obtained by a realistic spot sampling frequency and this may impact on the ability to detect trends and assess monitoring data against environmental quality standards when concentrations fluctuate.     

Mineralization and Transfer Processes of <Superscript>14</Superscript>C-labeled Pesticides in Outdoor Lysimeters

A recently designed two-chamber-lysimeter-test-system allows the detailed investigation of degradation, transport and transfer processes of ¹⁴C-labeled substances in soil–plant–atmosphere-systems under outdoor conditions. With this test system it is feasible to distinguish between ¹⁴C-emissions from soil surfaces and ¹⁴C-emissions from plant surfaces in soil monoliths under real environmental conditions. Special soil humidity sensors allow the measurement of soil water content near to the soil surface, in 1 and 5 cm depth. The behavior of organic chemicals can be followed for a whole vegetation period and a mass balance for the applied chemical can be established. Some selected results of the herbicides isoproturon and glyphosate – using the two-chamber-lysimeter-test-system – are presented to demonstrate its applicability for the identification and quantification of the processes that govern pesticide behavior in soil–plant-systems. Mineralization of ¹⁴C-isoproturon was very different in four different soils; the mineralization capacity of the soils ranged from 2 to 60%. Leaching of isoproturon in general was very low, but depending on the soil type and environmental conditions isoproturon and its metabolites could be leached via preferential flow, especially shortly after application. For the herbicide ¹⁴C-glyphosate no accumulation of residues in the soil and no leaching of the residues to deeper soil layers could be observed after three applications. Glyphosate was rapidly degraded to AMPA in the soil. Glyphosate and AMPA were accumulated in soy bean nodules.     

Dilution-based emissions sampling from stationary sources: Part 1--Compact sampler methodology and performance

This paper presents the design and performance of a compact dilution sampler (CDS) for characterizing fine particle emissions from stationary sources. The sampler is described, along with the methodology adopted for its use. Dilution sampling has a number of advantages, including source emissions that are measured under conditions simulating stack gas entry and mixing in the ambient atmosphere. This is particularly important for characterizing the semivolatile species in effluents as a part of particulate emissions. The CDS characteristics and performance are given, along with sampling methodology. The CDS was compared with a reference dilution sampler. The results indicate that the two designs are comparable for tests on gas-fired units and a diesel electrical generator. The performance data indicate that lower detection limits can be achieved relative to current regulatory methods for particulate emissions. Test data for the fine particulate matter (PM2.5) emissions are provided for comparison with U.S. Environment Protection Agency (EPA) Conditional Test Method 040 for filterable particulate matter (FPM) and the EPA Method 202 for condensable particulate matter. This comparison showed important differences between methods, depending on whether a comparison is done between in situ FPM determinations or the sum of such values with condensable PM from liquid filled impingers chilled in an ice bath. These differences are interpretable in the light of semivolatile material present in the stack effluent and, in some cases, differences in detection and quantification limits. Determination of emissions from combustors using liquid fuels can be readily achieved using 1-hr sampling with the CDS. Emissions from gasfired combustors are very low, requiring careful attention to sample volumes. Sampling volumes corresponding with 6-hr operation were used for the combined mass and broad chemical speciation. Particular attention to dilution sampler operation with clean dilution air also is essential for gas-fired sources.     

Biomonitoring with Gammarus pulex at the Meuse (NL), Aller (GER) and Rhine (F) rivers with the online Multispecies Freshwater Biomonitor

Biological early warning systems represent a set of tools that may be able to respond to certain chemical monitoring requirements of recent European legislation, the Water Framework Directive (WFD2000/60/EC), that aims to improve and protect water quality across Europe. In situ biomonitoring was performed along the rivers Meuse (NL), Aller (GER) and Rhine (F) within the frame of the European Union-funded Project SWIFT-WFD. Gammarus pulex was used as a test organism during the evaluation of the Multispecies Freshwater Biomonitor(R) (MFB), an online biomonitor to quantitatively record different behaviour patterns of animals. At the river Meuse G. pulex reacted to pulse exposure of either a mixture of trace metals or of several organic xenobiotics, by showing up to 20% decreased locomotory activity (already at the 1st pulse) and increased mortality (at 2nd or 3rd pulse only). G. pulex deployed within the MFB system were observed to survive well at the monitoring station on the Aller (100%) and monitoring did not result in the measurement of chemical irregularities. In contrast, deployment at the monitoring station on the Rhine river demonstrated that the test organism was able to detect chemical irregularities by up to 20% decreased locomotory activity in the animals. The MFB proved to be an alert system for water quality monitoring at sensitive sites and sites with accidental pollution.     

Mapping Cumulative Environmental Risks: Examples from the EU NoMiracle Project

We present examples of cumulative chemical risk mapping methods developed within the NoMiracle project. The different examples illustrate the application of the concentration addition (CA) approach to pesticides at different scale, the integration in space of cumulative risks to individual organisms under the CA assumption, and two techniques to (1) integrate risks using data-driven, parametric statistical methods, and (2) cluster together areas with similar occurrence of different risk factors, respectively. The examples are used to discuss some general issues, particularly on the conventional nature of cumulative risk maps, and may provide some suggestions for the practice of cumulative risk mapping.     

Second trimester two-step trisomy 18 screening using maternal serum markers

Trisomy 21 maternal serum marker screening has led to screening for other anomalies, including trisomy 18. Trisomy 18 is generally prenatally diagnosed because of major morphological defects. However, in up to 30% of cases ultrasound signs are unclear, and in most cases diagnosis is performed late in pregnancy. Of the different maternal serum markers, PAPP-A is now considered as the best for trisomy 18 screening. However, pregnancy-associated plasma protein A (PAPP-A) is of value in first trimester screening for trisomy 21, but not in the second trimester. We therefore propose a two-step screening strategy. Based on 45 trisomy 18 cases, we confirm the values of alpha-fetoprotein (AFP) (median 0.61 MoM), free β-human chorionic gonadotrophin (β-hCG) (median 0.24 MoM) and of PAPP-A (median 0.08 MoM). In the first step, a 0.5 MoM cut-off for AFP or for free β-hCG resulted in detection of 37/45 trisomy 18 cases (82%) with a 10% false-positive rate. The second step consisted of the measurement of PAPP-A for all these false-positive cases. Using a PAPP-A cut-off of 0.5 MoM, all the 37 trisomy 18 cases were detected, but now with a 0.1–0.2% false-positive rate. Amniocentesis was only offered to these few patients. This two-step second trimester screening will be of value for patients who have not been included in first trimester screening based on nuchal translucency (NT) measurement combined with the first trimester markers, PAPP-A and free β-hCG. Copyright © 2002 John Wiley & Sons, Ltd.     

Evaluation of the Effect of Chemical or Enzymatic Synthesis Methods on Biodegradability of Polyesters

This work compares the biodegradability of polyesters produced by an esterification reaction between glycerol and oleic di-acid (D 18:1) issued from green chemical pathways, via either classical thermo-chemical methods, or an enzymatic method using the immobilized lipase of Candida antartica B (Novozym 435). An elastomeric polymer synthesized by enzymatic catalysis is more biodegradable than an elastomeric thermo-chemical polyester synthesized by a standard chemical procedure. This difference lies in percentage of the dendritic motifs, in values of the degree of substitution, and certainly in cross-links inducing an hyper-branched structure less accessible to the lipolytic enzymes in a waste treatment plant. However, when the elastomeric polymer synthesized by enzymatic catalysis is processed at high temperature as required for certain industrial applications, it presents an identical rate of biodegradation than the chemical polyester. The advantages of the thermo-chemical methods are greater speed and lower cost. Enzymatic synthesis appears be suited to producing polyesters, devoid of metallic catalysts, which must be used without processing at high temperature to keep a high biodegradability.