Assessment of aquatic experimental versus predicted and extrapolated chronic toxicity data of four structural analogues

The present study was developed to assess the chronic toxicity predictions and extrapolations for a set of chlorinated anilines (aniline (AN), 4-chloroaniline (CA), 3,5-dichloroaniline (DCA) and 2,3,4-trichloroaniline (TCA)). Daphnia magna 21 d chronic experimental data was compared to the chronic toxicity predictions made by the US EPA ECOSAR QSAR tools and to acute-to-chronic extrapolations. Additionally, Species Sensitivity Distributions (SSDs) were constructed to assess the chronic toxicity variability among different species and to investigate the acute versus chronic toxicity in a multi-species context.Since chlorinated anilines are structural analogues with a designated polar narcotic mode of action, similar toxicity responses were assumed. However, rather large interchemical and interspecies differences in toxicity were observed. Compared to the other three test compounds, TCA exposure had a significantly larger impact on growth and reproduction of D. magna. Furthermore, this study illustrated that QSARs or a fixed ACR are not able to account for these interchemical and interspecies differences. Consequently, ECOSAR was found to be inadequate to predict the chronic toxicity of the anilines and the use of a fixed ACR (of 10) led to under of certain species. The experimental ACRs determined in D. magna were substantially different among the four aromatic amines (ACR of 32 for AN, 16.9 for CA, 5.7 for DCA and 60.8 for TCA). Furthermore, the SSDs illustrated that Danio rerio was rather insensitive to AN in comparison to another fish species, Phimphales promelas. It was therefore suggested that available toxicity data should be used in an integrative multi-species way, rather than using individual-based toxicity extrapolations. In this way, a relevant overview of the differences in species sensitivity is given, which in turn can serve as the basis for acute to chronic extrapolations.     

Effects of long exposure to low temperatures on nitrifying biofilm and biomass in wastewater treatment

Attached growth biological treatment systems are a promising solution to ammonia removal in cold-temperature climates. Environmental scanning electron microscopy (ESEM) and confocal laser scanning microscopy in combination with fluorescent in situ hybridization (FISH) was used to investigate the effects of 4 months of exposure to 4 degrees C on nitrifying biofilm and biomass. These molecular and microscopic methods were modified to minimize loss of mass and distortion of in situ perspectives. Environmental scanning electron microscopy revealed that nitrifying biofilm did not exhibit significant changes in volume with exposure to 4 degrees C. Confocal laser scanning microscopy in combination with FISH showed that the number of ammonia-oxidizing bacteria (AOB) cells present in the biofilm was statistically consistent during exposure to 4 degrees C. The RNA content of AOB cells remained sufficient for FISH enumeration. The number of nitrite-oxidizing bacteria cells remained steady during exposure to 4 degrees C; however, the RNA content of the cells appeared to decrease with exposure to 4 degrees C, thereby preventing their enumeration using FISH.     

Extractability of water-soluble soil organic matter as monitored by spectroscopic and chromatographic analyses

Purpose

Cold and hot water processes have been intensively used to recover soil organic matter, but the effect of extraction conditions on the composition of the extracts were not well investigated. Our objective was to optimize the extraction conditions (time and temperature) to increase the extracted carbon efficiency while minimizing the possible alteration of water extractable organic matter of soil (WEOM).

Method

WEOM were extracted at 20°C, 60°C, or 80°C for 24?h, 10?C60?min, and 20?min, respectively. The different processes were compared in terms of pH of suspensions, yield of organic carbon, spectroscopic properties (ultraviolet?Cvisible absorption and fluorescence), and by chromatographic analyses.

Results

For extraction at 60°C, the time 30?min was optimal in terms of yield of organic carbon extracted and concentration of absorbing and fluorescent species. The comparison of WEOM 20°C, 24?h; 60°C, 30?min; and 80°C, 20?min highlighted significant differences. The content of total organic carbon, the value of specific ultraviolet absorbance (SUVA₂₅₄), the absorbance ratio at 254 and 365?nm (E ₂/E ₃), and the humification index varied in the order: WEOM (20°C, 24?h)?Conclusions For the soil chosen, extraction at 60°C for 30?min is the best procedure for enrichment in organic chemicals and minimal alteration of the organic matter.     

Profiling the spatial concentration of allethrin and piperonyl butoxide using passive sorptive sampling and thermal desorption capillary GC-MS

Spatial concentration distribution of a chemical in an indoor environment is an important factor in the evaluation of chemical nuisances. However, straightforward techniques for the determination of this distribution are not very common and usually limited in their application. Sorptive sampling using polydimethylsiloxane-coated stir bars and the combination of active and diffusive sampling were shown to allow uncomplicated spatial concentration profiling of multiple compounds in an indoor environment. The validity of the approach was demonstrated in the analysis of the spatial concentration distribution of a pyrethroid insecticide in a common bedroom. The relative concentrations of allethrin and piperonyl butoxide were profiled throughout the room upon the application of an insecticide vaporizer.     

Cost-effective experimental design to support modeling of concentration-response functions

Modeling concentration-response function became extremely popular in ecotoxicology during the last decade. Indeed, modeling allows determining the total response pattern of a given substance. However, reliable modeling is consuming in term of data, which is in contradiction with the current trend in ecotoxicology, which aims to reduce, for cost and ethical reasons, the number of data produced during an experiment. It is therefore crucial to determine experimental design in a cost-effective manner. In this paper, we propose to use the theory of locally D-optimal designs to determine the set of concentrations to be tested so that the parameters of the concentration-response function can be estimated with high precision. We illustrated this approach by determining the locally D-optimal designs to estimate the toxicity of the herbicide dinoseb on daphnids and algae. The results show that the number of concentrations to be tested is often equal to the number of parameters and often related to the their meaning, i.e. they are located close to the parameters. Furthermore, the results show that the locally D-optimal design often has the minimal number of support points and is not much sensitive to small changes in nominal values of the parameters. In order to reduce the experimental cost and the use of test organisms, especially in case of long-term studies, reliable nominal values may therefore be fixed based on prior knowledge and literature research instead of on preliminary experiments.     

Flow cytometric measurement of the clearance rate in the blue mussel Mytilus edulis and the development of a new individual exposure system for aquatic immunotoxicological studies

Animals in poor health condition are not relevant biological models. The current study focused on the use of the clearance rate of Mytilus edulis to assess the gross physiological condition of individuals maintained in stressful experimental conditions. This approach was developed in a new, highly controlled experimental exposure device designed to investigate individual responses in aquatic ecotoxicological studies. Both clearance rate values and immune parameters analysis indicated that the health condition of mussels kept in 50ml tubes for 24h or 48h was not altered compared to controls, while most parameters were depressed after 72h. Moreover, this study confirms the relevance of flow cytometric for the measurement of clearance rate compared to techniques utilizing microscopy. Current results prompted us to perform further 24h chemical exposure using this "in tubo" device.     

PCDD/F levels in plasma of a belgian population before and after the 1999 belgian PCB/DIOXIN incident

We evaluated the impact of the 1999 Belgian dioxin incident on the blood plasma polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) levels among 232 Belgian blood donors (74% men, mean age 47 years). The Red Cross made plasma samples from before the incident of these donors available. A second plasma sample was collected during the second half of 2000. The sum of the 17 PCDD/F congeners was significantly lower in 2000 compared to 1998 (417 pg/g fat versus 445 pg/g fat, respectively). This could be completely attributed to the significant decrease of OctaCDD (301 pg/g fat in 2000 versus 277 pg/g fat in 1998). Moreover a slight but significant decrease was observed for 2,3,7,8-TetraCDF and for 1,2,3,4,6,7,8-HeptaCDF. 1,2,3,7,8-PentaCDF and 2,3,4,7,8-PentaCDF however showed a slight but significant increase (respective levels in 1998 were 0.004 and 14.5 pg/g fat compared to 0.006 and 17.9 pg/g fat in 2000). Given their significantly higher presence in incident related food samples this increase can be attributed to the food contamination episode. However, the total toxicity remained unchanged (22.9 in 1998 versus 23.1 pg WHO-TEQ/g fat, p>0.05). Moreover the observed congener profiles and the total PCDD/F levels were similar to those of other European non-occupationally exposed populations. In conclusion, the 1999 PCB/dioxin incident was traceable in the plasma profiles (rise of the two specific PCDF congeners), but comparison of the results for both years indicates that the changes were too small to cause an adverse public health effect.     

Using a fire propagation model to assess the efficiency of prescribed burning in reducing the fire hazard

We examined how fire hazard was affected by prescribed burning and fuel recovery over the first six years following treatment. Eight common Mediterranean fuel complexes managed by means of prescribed burning in limestone Provence (South-Eastern France) were studied, illustrating forest and woodland, garrigue and grassland situations. The coupled atmosphere-wildfire behaviour model FIRETEC was used to simulate fire behaviour (ROS, intensity) in these complex vegetations. The temporal threshold related to the effectiveness of prescribed burning in reducing the fire hazard was assessed from derivated fuel dynamics after treatment. The study showed that prescribed burning treatment was effective for the first two years in most of the Mediterranean plant communities analysed. Thereafter, all forests and shrublands were highly combustible with a fire line intensity of more than 5000 kW/m except for pine stands with or without oak (medium intensity of 2000 kW m⁻¹ 3 years after treatment). Low fire line intensity (900 kW m⁻¹) was obtained for grassland which was entirely treatment-independent since the resprouter hemicryptophyte, Brachypodium retusum, is highly resilient to fire. Fire behaviour was greatly affected by fuel load accumulation of Quercus ilex in woodland, and by standing necromass of Rosmarinus officinalis in treated garrigue. Pure pine stands with shrub strata similar to garrigue showed a lower fire intensity due to wind speed decrease at ground level under tree canopy, underlining the advantage of maintaining a proportion of canopy cover in strategic fuel-break zones.