Variation in responses of late-seral herbs to disturbance and environmental stress

Clonal herbs that attain maximum development in late-seral forest are often assumed to have similar responses to disturbance and to be functionally equivalent. However, little is known about the demographic or physiological responses of these plants to disturbance or to the altered conditions of the post-disturbance environment. Following harvest of a mature coniferous forest, we compared abundance, demographic changes, and physiological acclimation of three clonal herbs (Asarum caudatum, Clintonia uniflora, and Pyrola picta) that differ in belowground morphology and leaf longevity. We measured ramet density, leaf area, and demographic variables (survival, clonal growth, flowering, and seedling establishment) before and for two years after harvest, and in adjacent undisturbed forest. Acclimation to increased solar radiation was assessed two years after harvest by measuring leaf mass per unit area (LMA) and chlorophyll a:b ratios of leaves produced in the current year. Although initial declines in abundance were similar, demographic responses indicate that patterns of recovery varied greatly among species. Two years after logging, ramet survival and clonal growth (production of new ramets) of Clintonia were greater in the harvest area than in the forest. Asarum had lower survival in the harvest area, but greater clonal growth, and Pyrola showed no difference in either survival or growth between environments. Only Asarum produced seedlings, although their survival was low in the harvest area. All species had higher LMA in the harvest area, but only Clintonia (with annual leaves) had a higher chlorophyll a:b ratio, suggesting the greatest potential for acclimation to increased light. Our results demonstrate that forest herbs with greater rhizome plasticity and shorter leaf duration have greater potential to acclimate after disturbance than those with rigid architectures and persistent leaves. Thus, species with comparable successional roles can vary substantially in their demographic and physiological responses to disturbance, with potential consequences for long-term recovery.     

Sustainability of the dimension stone industry in Zimbabwe—challenges and opportunities

The rapid expansion of the dimension stone and black granite industry in Zimbabwe in the 1990s, a result of increasing domestic and international demand for black granite, has ushered in new challenges and opportunities for producers and beneficiaries alike. This article investigates the social, environmental and economic challenges emanating from the export boom, the economic opportunities presented by the expanding market and the potential role the robust industry could play in regional economic development and poverty alleviation. The article evaluates the long-term sustainability of the dimension stone industry and recommends the reinvestment of revenues into diversification of the regional economic base, upgrading of local infrastructure, further processing of rough stone before export and encouragement of micro-businesses to enhance sustainability. The author argues for modification of economic incentives to incorporate environmental and social objectives in order to enhance sustainability. The need for a holistic approach to policies affecting the exploitation, processing and marketing of granite resources and their products is recognized. More research on the operations of the industry is called for.     

Control of Biofouling: Lessons Learned From a Decade of Carbon Injection System Operation and Maintenance

Over the past decade, we have learned a number of critical lessons surrounding carbon substrate handling while operating and maintaining hundreds of enhanced in situ biological remedies. The same qualities that make these substrates effective can also cause biofouling of the mixing system, piping infrastructure, and remediation wells. Managing biofouling is a key piece of a successful remedy and requires a unique set of design principles. Small decreases in injection rates can have considerable impacts to life‐cycle costs and performance caused by decreased substrate distribution and longer injection time frames, resulting in the need for system cleaning, well rehabilitation, and even well replacement. Biofouling can impair performance in any size system, but effects are often magnified by large injection volumes and extended time frames. Design should be considered in all stages of the anaerobic enhanced in situ bioremediation life cycle, particularly related to reagent mixing, storage, and residence time within the system. By understanding the fundamental mechanisms of biofouling, practitioners can make operational adjustments to enhance remedy performance by considering potential biofouling controls in the design; balancing site‐specific strategy and diagnostics; and proactively adjusting and fine tuning control/prevention technology and methodology. Ultimately, a combination of chemical and physical methods may be required to operate a carbon handling system over the long term; however, the operational costs can be greatly reduced and delivery efficiency increased if these methods are understood during the design phase. © 2013 Wiley Periodicals, Inc.     

Monitoring Inter-Annual Variability Reveals Sources of Mercury Contamination in Clear Lake, California

Mercury (Hg) in the aquatic ecosystem of Clear Lake has been documented since the 1970s when fishes were found to have elevated levels of toxic methyl mercury (meHg). Mining practices at the Sulphur Bank Mercury Mine (active intermittently from 1872–1957) along the shoreline of Clear Lake included the bulldozing of waste rock and overburden ore into the shallow nearshore regions of the lake and the creation of steeply sloped piles of waste rock at the water's edge. This process, plus erosion of the waste rock piles, resulted in the accumulation of an estimated 100 metric tons of Hg in Clear Lake. A monitoring program to assess Hg in Clear Lake was established in 1992, and conducted continuously from 1994. Drought conditions in California had persisted for ca. 6 yrs prior to 1992, when the U.S. Environmental Protection Agency (USEPA) remediated the steeply sloped eroding waste rock piles, which appeared to reduce sediment Hg concentrations significantly. In April 1995, a white flocculent material was observed in Clear Lake adjacent to the mine and has been observed every year since, leading to the discovery of ongoing acid mine drainage (AMD), low pH fluids high in Hg and extremely high in sulfate. AMD is now believed to be the most likely cause of elevated meHg in Clear Lake. The discovery of this source of meHg production in Clear Lake, which will significantly influence remedial options, was only made possible by implementation of a diligent monitoring program.     

Plutonium in the WIPP environment: its detection, distribution and behavior

The Waste Isolation Pilot Plant (WIPP) is the only operating deep underground geologic nuclear repository in the United States. It is located in southeastern New Mexico, approximately 655 m (2150 ft) below the surface of the Earth in a bedded Permian evaporite salt formation. This mined geologic repository is designed for the safe disposal of transuranic (TRU) wastes generated from the US defense program. Aerosol and soil samples have been collected near the WIPP site to investigate the sources of plutonium in the WIPP environment since the late 1990s, well before WIPP received its first shipment. Activities of (238)Pu, (239+240)Pu and (241)Am were determined by alpha spectrometry following a series of chemical separations. The concentrations of Al and U were determined in a separate set of samples by inductively coupled plasma mass spectrometry. The annual airborne concentrations of (239+240)Pu during the period from 1998 to 2010 show no systematic interannual variations. However, monthly (239+240)Pu particulate concentrations show a typical seasonal variation with a maximum in spring, the time when strong and gusty winds frequently give rise to blowing dust. Resuspension of soil particles containing weapons fallout is considered to be the predominant source of plutonium in the WIPP area. Further, this work characterizes the source, temporal variation and its distribution with depth in a soil profile to evaluate the importance of transport mechanisms affecting the fate of these radionuclides in the WIPP environment. The mean (137)Cs/(239+240)Pu, (241)Am/(239+240)Pu activity ratio and (240)Pu/(239)Pu atom ratio observed in the WIPP samples are consistent with the source being largely global fallout. There is no evidence of any release from the WIPP contributing to radionuclide concentrations in the environment.     

Speciation/fractionation of nickel in airborne particulate matter: improvements in the Zatka sequential leaching procedure

Modifications are reported to the sequential leaching analytical method for nickel speciation/fractionation specified by Zatka so that larger sample masses can be analyzed. Improvements have been made in the completeness of the sulfide/metallic separation during the peroxide-citrate leach step by use of a larger volume of leachant, a longer leach duration and an orbital shaker. Minimal extraction of metallic nickel in this prolonged sulfidic nickel extraction has been confirmed. An increase in the number of samples analyzed simultaneously using these modifications has resulted in substantial productivity improvements and concomitant lower costs. It is critical for practitioners of sequential leaching techniques to recognize potential limitations and to use professional judgment when interpreting results. For example, results obtained may not be biologically relevant in assessing health risks; the acts of sampling and storage may result in changes in fractionation with time; surface coatings/films may alter the ability of a leachant to react with the target compound; and leaching behaviours may be different for samples differing only in particle size distributions.     

Relationships among nekton assemblage structure and abiotic conditions in three Texas tidal streams

The objective of this study was to assess the effects of spatially and temporally varying abiotic conditions on the nekton residing in tidally influenced streams and determine the comparability of the assemblage response across the various gears needed to fully characterize the biota. Three tidal streams were sampled seasonally for 2 years for chemical (physiochemical profiles), physical (in-stream and riparian habitat classification), and biological (nekton sampled with bag seines, trawls, and gill nets) components of ecosystem integrity. Multiple sampling stations on each stream encompassed the transitional character of the tidally influenced ecosystem, from the freshwater of the river to the saltwater of the bay. Instead of characterizing the biota with traditional fish-based indexes of biotic integrity, analysis methodologies relying heavily on multivariate ordination techniques were used. This study showed that the temporal and spatial relationships among nekton assemblages and abiotic environmental conditions were quite gear dependent. The greatest degree of difference in indicators of ecosystem health all involved upstream–downstream gradients that appear to be driven by salinity structure. Based on the results of this study, dissolved oxygen concentration does not appear to be a major structuring factor in the physical, chemical, or biological component of ecosystem integrity.     

Mapping trees outside forests using high-resolution aerial imagery: a comparison of pixel- and object-based classification approaches

Discrete trees and small groups of trees in nonforest settings are considered an essential resource around the world and are collectively referred to as trees outside forests (ToF). ToF provide important functions across the landscape, such as protecting soil and water resources, providing wildlife habitat, and improving farmstead energy efficiency and aesthetics. Despite the significance of ToF, forest and other natural resource inventory programs and geospatial land cover datasets that are available at a national scale do not include comprehensive information regarding ToF in the United States. Additional ground-based data collection and acquisition of specialized imagery to inventory these resources are expensive alternatives. As a potential solution, we identified two remote sensing-based approaches that use free high-resolution aerial imagery from the National Agriculture Imagery Program (NAIP) to map all tree cover in an agriculturally dominant landscape. We compared the results obtained using an unsupervised per-pixel classifier (independent component analysis—[ICA]) and an object-based image analysis (OBIA) procedure in Steele County, Minnesota, USA. Three types of accuracy assessments were used to evaluate how each method performed in terms of: (1) producing a county-level estimate of total tree-covered area, (2) correctly locating tree cover on the ground, and (3) how tree cover patch metrics computed from the classified outputs compared to those delineated by a human photo interpreter. Both approaches were found to be viable for mapping tree cover over a broad spatial extent and could serve to supplement ground-based inventory data. The ICA approach produced an estimate of total tree cover more similar to the photo-interpreted result, but the output from the OBIA method was more realistic in terms of describing the actual observed spatial pattern of tree cover.     

Studies on degradation of glyphosate by several oxidative chemical processes: Ozonation,photolysis and heterogeneous photocatalysis

Several different Advanced Oxidation Processes (AOPs) including ozonation at pH 6.5 and 10, photolysis and heterogeneous photocatalysis using TiO₂ as semiconductor and dissolved oxygen as electron acceptor were applied to study the degradation of glyphosate (N-phosphonomethyl glycine) in water. The degree of glyphosate degradation, the reactions kinetic and the formation of the major metabolite, aminomethyl phosphonic acid (AMPA), were evaluated. Ozonation at pH 10 resulted in the maximum mineralization of glyphosate. It was observed that under the experimental conditions used in this study the degradation of glyphosate followed the first-order kinetics. The half-life obtained for glyphosate degradation in the O₃/pH 10 process was 1.8 minutes.     

Point-of-use water disinfection using UV light-emitting diodes to reduce bacterial contamination

The treatment process described in this research explores the impact of exposing water samples containing fecal coliforms to the radiation produced by single ultraviolet (UV) light-emitting diodes (LEDs) operating at 265 nm. UV LEDs are long lasting, compact in size and produce more efficient light output than traditional mercury-vapour bulbs, making them ideal for application in point-of-use disinfection systems, such as in remote areas. In this study, contaminated water samples containing either a pure culture of Escherichia coli or tertiary effluent from the City of Regina Wastewater Treatment Plant were used to study the application and efficiency of using UV LEDs for water disinfection. The results indicate that bacterial inactivation was achieved in a time-dependent manner, with 1- and 2.5-log E. coli reductions in water following 20 and 50 min of UV LED exposure, respectively. Ultraviolet radiation was less effective in reducing coliform bacteria in wastewater samples due to the elevated turbidity levels. Further work remains to be completed to optimize the application of UV LEDs for point-of-use disinfection systems; however, the results from this study support that bacterial inactivation using UV LEDs is possible, meriting further future technological development of the LEDs.