Advanced REACH Tool (ART): calibration of the mechanistic model

The mechanistic model of the Advanced Reach Tool (ART) provides a relative ranking of exposure levels from different scenarios. The objectives of the calibration described in this paper are threefold: to study whether the mechanistic model scores are accurately ranked in relation to exposure measurements; to enable the mechanistic model to estimate actual exposure levels rather than relative scores; and to provide a method of quantifying model uncertainty. Stringent data quality guidelines were applied to the collated data. Linear mixed effects models were used to evaluate the association between relative ART model scores and measurements. A random scenario and company component of variance were introduced to reflect the model uncertainty. Stratified analyses were conducted for different forms of exposure (abrasive dust, dust, vapours and mists). In total more than 2000 good quality measurements were available for the calibration of the mechanistic model. The calibration showed that after calibration the mechanistic model of ART was able to estimate geometric mean (GM) exposure levels with 90% confidence for a given scenario to lie within a factor between two and six of the measured GM depending upon the form of exposure.     

Monitoring fluvial water chemistry for trend detection: hydrological variability masks trends in datasets covering fewer than 12 years

This paper sub-samples four 35 year water quality time series to consider the potential influence of short-term hydrological variability on process inference derived from short-term monitoring data. The data comprise two time series for nitrate (NO(3)-N) and two for DOC (using water colour as a surrogate). The four catchments were selected not only because of their long records, but also because the four catchments are very different: upland and lowland, agricultural and non-agricultural. Multiple linear regression is used to identify the trend and effects of rainfall and hydrological 'memory effects' over the full 35 years, and then a moving-window technique is used to subsample the series, using window widths of between 6 and 20 years. The results suggest that analyses of periods between six and eleven years are more influenced by local hydrological variability and therefore provide misleading results about long-term trends, whereas periods of longer than twelve years tend to be more representative of underlying system behaviour. This is significant: if such methods for analysing monitoring data were used to validate changes in catchment management, a monitoring period of less than 12 years might be insufficient to demonstrate change in the underlying system.     

Sardine (Sardina pilchardus) spawning seasonality in European waters of the northeast Atlantic

Egg data from ichthyoplankton monitoring sites in the western English Channel (1988–2003) and northern Spain (1990–2000) and macroscopic maturity data from biological samples of purse seine landings in western and southern Iberia (1980–2004) are used to describe the spawning seasonality of sardine (Sardina pilchardus) in European waters of the northeast Atlantic using generalised additive models. The fitted models reveal a double peak in spawning activity during early summer and autumn in the western Channel, a wider spring peak off northern Spain and a broad winter season in the western and southern Iberian Peninsula. At all sites, a high probability of spawning activity was observed over at least 3 months of the year, with the duration of the season increasing with both decreasing latitude and increasing fish size. Off western and southern Iberia there are indications that the spawning season has been of longer duration in recent years for all size classes (reaching in some cases 8 months of the year for large fish). These patterns are in general agreement with existing literature and theoretical expectations of sardine spawning being driven locally by the seasonal cycle of water temperature, assuming preferences for spawning at 14 –15°C and avoidance for temperatures below 12°C and above 16°C. Regional quotient plots indicated that spawning tolerance to higher temperatures increases progressively with decreasing latitude. Despite the weak evidence for geographical differences in temperature tolerance that may have some genetic origin, the degree of spatio-temporal overlap in sardine-spawning activity within Atlantic European waters is unlikely to promote any reproductive isolation in that area.     

Predicting tree diversity across the United States as a function of modeled gross primary production.

At the regional and continental scale, ecologists have theorized that spatial variation in biodiversity can be interpreted as a response to differences in climate. To test this theory we assumed that ecological constraints associated with current climatic conditions (2000-2004) might best be correlated with tree richness if expressed through satellite-derived measures of gross primary production (GPP), rather than the more commonly used, but less consistently derived, net primary production. To evaluate current patterns in tree diversity across the contiguous United States we acquired information on tree composition from the USDA Forest Service's Forest Inventory and Analysis program that represented more than 17,4000 survey plots. We selected 2693 cells of 1000 km2 within which a sufficient number of plots were available to estimate tree richness per hectare. Our estimates of forest productivity varied from simple vegetation indices indicative of the fraction of light intercepted by canopies at 16-d intervals, a product from the MODIS (Moderate Resolution Imaging Spectro-radiometer), to 8- and 10-d GPP products derived with minimal climatic data (MODIS) and SPOT-Vegetation (Systeme Pour l'Observation de la Terre), to 3-PGS (Physiological Principles Predicting Growth with Satellites), which requires both climate and soil data. Across the contiguous United States, modeled predictions of gross productivity accounted for between 51% and 77% of the recorded spatial variation in tree diversity, which ranged from 2 to 67 species per hectare. When the analyses were concentrated within nine broadly defined ecoregions, predictive relations largely disappeared. Only 3-PGS predictions fit a theorized unimodal function by being able to distinguish highly productive forests in the Pacific Northwest that support lower than expected tree diversity. Other models predicted a continuous steep rise in tree diversity with increasing productivity, and did so with generally better or nearly equal precision with fewer data requirements.     

Verification of diffusive and pumped samplers for volatile organic compounds using a controlled atmosphere test facility

There is a requirement to verify the performance of sorbent-based passive or active samplers and to extend their use, where possible, to monitor volatile organic compounds (VOCs) that are known to be photochemical ozone pre-cursors or are relevant to the activities of the petrochemical industry. We report measurements of the 14-day diffusive uptake rates for the VOCs: i-butane (2-methyl propane), n-butane, i-pentane (2-methyl butane), n-pentane, n-hexane, benzene, toluene, and m-xylene (at environmental level concentrations) for industry standard axial samplers (Perkin–Elmer-type samplers) containing the sorbents Carbopack-X, -Z, -B or Tenax-TA. We also present data on back-diffusion, blank levels, and storage for the above sorbents, and describe the simultaneous use of the sorbent Carbopack-X for pumped sampling of certain VOCs. The results were obtained by dosing samplers in a controlled atmosphere test facility (CATFAC) operating under well-defined conditions of concentration, nominal temperature of 20 °C, wind speed of 0.5 m s^?1, and relative humidities of 0% and 80%. Field measurements were also obtained to provide supplementary data to support the laboratory study. Results are compared to existing published data, where these are available.     

Volatile Organic Compounds from Coal Tar and Soil Vapor Samples at MGP Sites

This study characterized organic compounds found in New York State manufactured gas plant (MGP) coal tar vapors using controlled laboratory experiments from four separate MGP sites. In addition, a limited number of deep (0.3–1.2 m above coal tar) and shallow (1.2–2.4 m above coal tar) soil vapor samples were collected above the in situ coal tar source at three of these sites. A total of 29 compounds were consistently detected in the laboratory-generated coal tar vapors at 50°C, whereas 24 compounds were detected at 10°C. The compounds detected in the field sample results were inconsistent with the compounds found in the laboratory-generated samples. Concentrations of compounds in the shallow soil vapor sample were either non-detectable or substantially lower than those found in deeper samples, suggesting attenuation in the vadose zone. Laboratory-generated data at 50°C compared the (% non-aromatic)/(% aromatic) ratio and indicated that this ratio may provide good discrimination between coal tar vapor and common petroleum distillates.     

Reducing Interference Effects in the Chemiluminescent Measurement of Nitric Oxides from Combustion Systems

Experiments were carried out to determine the relative chemiluminescence quenching efficiencies as a function of third body concentration for each of the common combustion products, H₂O, CO₂, CO, H₂, O₂ and Ar. These results are compared with those of other investigators. The effect of reaction chamber pressure on analyzer response and the development of an analyzer design which incorporates an adjustable sample capillary inlet capable of maintaining a constant molar flow rate of sample gas to the reaction chamber are discussed. The effect of carbon monoxide interference on chemiluminescent NO_x measurement has been isolated and found to be significant. A means of correcting NO, measurements for these CO interference effects is described. Quantification of NO and NO₂ absorption in liquid water in NO_x sampling systems has been made. Recommendations for sample system designs to handle the presence of water in the sample gas are made.     

Is Urban Stream Restoration Worth It?1

Kenney, Melissa A., Peter R. Wilcock, Benjamin F. Hobbs, Nicholas E. Flores, and Daniela C. Martínez, 2012. Is Urban Stream Restoration Worth It? Journal of the American Water Resources Association (JAWRA) 48(3): 603-615. DOI: 10.1111/j.1752-1688.2011.00635.x Abstract: Public investment in urban stream restoration is growing, yet little has been done to quantify whether its benefits outweigh its cost. The most common drivers of urban stream projects are water quality improvement and infrastructure protection, although recreational and aesthetic benefits are often important community goals. We use standard economic methods to show that these contributions of restoration can be quantified and compared to costs. The approach is demonstrated with a case study in Baltimore, Maryland, a city with a legal mandate to reduce its pollutant load. Typical urban stream restoration costs of US$500-1,200 per foot are larger than the cost of the least expensive alternatives for management of nitrogen loads from stormwater (here, detention ponds, equivalent to $30-120 per foot of restored stream) and for protecting infrastructure (rip-rap armoring of streambanks, at $0-120 per foot). However, the higher costs of stream restoration can in some cases be justified by its aesthetic and recreational benefits, valued using a contingent valuation survey at $560-1,100 per foot. We do not intend to provide a definitive answer regarding the worth of stream restoration, but demonstrate that questions of worth can be asked and answered. Broader application of economic analysis would provide a defensible basis for understanding restoration benefits and for making restoration decisions.     

Effect of diel period and season on seining effort required to detect changes in Lake Erie beach fish assemblages

Using beach seining data from Lake Erie beaches, we examined the effect of diel period and season on two common study objectives considered sensitive to sampling effort: (1) has fish assemblage composition changed between two sampling time periods?, and (2) how many samples are necessary to provide a representative sample of the fish assemblage? Across a range of effect sizes and power levels, sample sizes were estimated for species richness, total fish abundance, round goby (Neogobius melanostomus) abundance and emerald shiner (Notropis atherinoides) abundance. For most sampling periods and effect sizes, several hundred to several thousand seine hauls were estimated to be required for detecting large-scale (e.g. basin-wide) changes in round goby and emerald shiner abundance. Depending on the indicator of interest, night seining (either spring or fall) was interpreted as the most efficient approach. For both seasons, sampling effort beyond 40 to 50 night seine hauls results in few additional species being detected. Both species accumulation curves and estimated sample sizes indicate that less effort is required to detect species richness changes than fish abundance. For most effect sizes and power levels, estimates of the number of seine hauls required to detect changes in fish abundance are unrealistically large for most monitoring programs. More practical monitoring strategies could be achieved by adopting alternative indicators (e.g. guilds), a more liberal significance level (p=0.1), a paired-site sampling design, or including reference sites.     

Implications of Spatial Data Variations for Protected Areas Management: An Example from East Africa

Geographic information systems and remote sensing technologies have become an important tool for visualizing conservation management and developing solutions to problems associated with conservation. When multiple organizations separately develop spatial data representations of protected areas, implicit error arises due to variation between data sets. We used boundary data produced by three conservation organizations (International Union for the Conservation of Nature, World Resource Institute, and Uganda Wildlife Authority), for seven Ugandan parks, to study variation in the size represented and the location of boundaries. We found variation in the extent of overlapping total area encompassed by the three data sources, ranging from miniscule (0.4 %) differences to quite large ones (9.0 %). To underscore how protected area boundary discrepancies may have implications to protected area management, we used a landcover classification, defining crop, shrub, forest, savanna, and grassland. The total area in the different landcover classes varied most in smaller protected areas (those less than 329 km²), with forest and cropland area estimates varying up to 65 %. The discrepancies introduced by boundary errors could, in this hypothetical case, generate erroneous findings and could have a significant impact on conservation, such as local-scale management for encroachment and larger-scale assessments of deforestation.