The influence of the level of definition of functional specifications on the environmental performances of a complex system. EcoCSP approach

The tendency towards a homogenous mode of development modelled on that of Western countries means that sustainable development has become increasingly urgent. It is necessary to thoroughly redefine products and their expected performances in such a way that the consequences are compatible with sustainable development. In the domain of product design, this means that it is no longer sufficient to use assessment tools “after the fact” to check the impact of products whose functional unit (FU) was defined prior to production; it is now necessary to rethink the definition of the FU itself. This article aims to present an approach based on a combination of life cycle analysis methods and problem-solving by constraint satisfaction. This original approach makes it possible to vary the design of the different dimensions of the FUs of a complex system and thus to make it easier to identify the best architecture along with the best functional definition of the system. In this study, the EcoCSP approach is applied to define the functional performances of an ecological passenger ferry. The complexity of couplings between subsystems and the sheer number of those subsystems mean that the designer has to use “intelligent” tools. These simulate a great number of scenarios and help him/her to fine-tune the system and make the right technological choices with regard to the right functional specifications.     

Estimation of odor emission rate from landfill areas using the sniffing team method

The monitoring of the odor annoyance generated by a landfill area is difficult, since it is a multi-area-sources problem, with a discontinuous odor emission. This paper proposes an adaptation of the method of sniffing team campaigns to the particular case of fresh waste odors. The method is based on the field determination of odor perception points, followed by data processing with a bi-Gaussian-type model, adapted to handle the odors. In a first step, field observers delineate the region in which odor impact is experienced and then the emission rate is manipulated in a dispersion model until the predicted size of the impact zone matches that observed in the field. In a second step the adjusted emission rate is entered into the model to calculate the percentiles corresponding to the average annoyance zone. The originality of the proposed method is the introduction of all observation points and of all recorded meteorological data into the model. The paper discusses the method limitations and the errors induced on the results, i.e. the odor emission rate and the percentile lines (or iso-concentration lines) which are used to describe the odor concentrations on a map of the surroundings of the plant. The proposed method proves to be reliable for diffuse sources, such as landfill areas. The obtained results are coherent with other results found in the literature with other techniques.     

Two sampling strategies for an overview of pesticide contamination in an agriculture-extensive headwater stream

Two headwaters located in southwest France were monitored for 3 and 2 years (Auvézère and Aixette watershed, respectively) with two sampling strategies: grab and passive sampling with polar organic chemical integrative sampler (POCIS). These watersheds are rural and characterized by agricultural areas with similar breeding practices, except that the Auvézère watershed contains apple production for agricultural diversification and the downstream portion of the Aixette watershed is in a peri-urban area. The agricultural activities of both are extensive, i.e., with limited supply of fertilizer and pesticides. The sampling strategies used here give specific information: grab samples for higher pesticide content and POCIS for contamination background noise and number of compounds found. Agricultural catchments in small headwater streams are characterized by a background noise of pesticide contamination in the range of 20–70 ng/L, but there may also be transient and high-peak pesticide contamination (2000–3000 ng/L) caused by rain events, poor use of pesticides, and/or the small size of the water body. This study demonstrates that between two specific runoff events, contamination was low; hence the importance of passive sampler use. While the peak pesticide concentrations seen here are a toxicity risk for aquatic life, the pesticide background noise of single compounds do not pose obvious acute nor chronic risks; however, this study did not consider the risk from synergistic “cocktail” effects. Proper tools and sampling strategies may link watershed activities (agricultural, non-agricultural) to pesticides detected in the water, and data from both grab and passive samples can contribute to discussions on environmental effects in headwaters, an area of great importance for biodiversity.     

A spatiotemporal model for predicting grain aphid population dynamics and optimizing insecticide sprays at the scale of continental France

We expose here a detailed spatially explicit model of aphid population dynamics at the scale of a whole country (Metropolitan France). It is based on convection–diffusion-reaction equations, driven by abiotic and biotic factors. The target species is the grain aphid, Sitobion avenae F., considering both its winged and apterous morphs. In this preliminary work, simulations for year 2004 (an outbreak case) produced realistic aphid densities, and showed that both spatial and temporal S. avenae population dynamics can be represented as an irregular wave of population peak densities from southwest to northeast of the country, driven by gradients or differences in temperature, wheat phenology, and wheat surfaces. This wave pattern fits well to our knowledge of S. avenae phenology. The effects of three insecticide spray regimes were simulated in five different sites and showed that insecticide sprays were ineffective in terms of yield increase after wheat flowering. After suitable validation, which will require some further years of observations, the model will be used to forecast aphid densities in real time at any date or growth stage of the crop anywhere in the country. It will be the backbone of a decision support system, forecasting yield losses at the level of a field. The model intends then to complete the punctual forecasting provided by older models by a comprehensive spatial view on a large area and leads to the diminution of insecticide sprayings in wheat crops.     

Development of a combined isotopic and mass-balance approach to determine dissolved organic carbon sources in eutrophic reservoirs

A combined mass-balance and stable isotope approach was set up to identify and quantify dissolved organic carbon (DOC) sources in a DOC-rich (9 mg L⁻¹) eutrophic reservoir located in Western France and used for drinking water supply (so-called Rophemel reservoir). The mass-balance approach consisted in measuring the flux of allochthonous DOC on a daily basis, and in comparing it with the effective (measured) DOC concentration of the reservoir. The isotopic approach consisted, for its part, in measuring the carbon isotope ratios (δ¹³C values) of both allochthonous and autochthonous DOC sources, and comparing these values with the δ¹³C values of the reservoir DOC. Results from both approaches were consistent pointing out for a DOC of 100% allochthonous origin. In particular, the δ¹³C values of the DOC recovered in the reservoir (−28.5 ± 0.2‰; n = 22) during the algal bloom season (May-September) showed no trace of an autochthonous contribution (δ¹³C in algae = −30.1 ± 0.3‰; n = 2) being indistinguishable from the δ¹³C values of allochthonous DOC from inflowing rivers (−28.6 ± 0.1‰; n = 8). These results demonstrate that eutrophication is not responsible for the high DOC concentrations observed in the Rophemel reservoir and that limiting eutrophication of this reservoir will not reduce the potential formation of disinfection by-products during water treatment. The methodology developed in this study based on a complementary isotopic and mass-balance approach provides a powerful tool, suitable to identify and quantify DOC sources in eutrophic, DOC-contaminated reservoirs.     

Long-term effects of clear-cutting and selective cutting on soil methane fluxes in a temperate spruce forest in southern Germany

Based on multi-year measurements of CH₄ exchange in sub-daily resolution we show that clear-cutting of a forest in Southern Germany increased soil temperature and moisture and decreased CH₄ uptake. CH₄ uptake in the first year after clear-cutting (−4.5 ± 0.2 μg C m⁻² h⁻¹) was three times lower than during the pre-harvest period (−14.2 ± 1.3 μg C m⁻² h⁻¹). In contrast, selective cutting did not significantly reduce CH₄ uptake. Annual mean uptake rates were −1.18 kg C ha⁻¹ yr⁻¹ (spruce control), −1.16 kg C ha⁻¹ yr⁻¹ (selective cut site) and −0.44 kg C ha⁻¹ yr⁻¹ (clear-cut site), respectively. Substantial seasonal and inter-annual variations in CH₄ fluxes were observed as a result of significant variability of weather conditions, demonstrating the need for long-term measurements. Our findings imply that a stepwise selective cutting instead of clear-cutting may contribute to mitigating global warming by maintaining a high CH₄ uptake capacity of the soil.     

Aerosol formation yields from the reaction of catechol with ozone

The formation of secondary organic aerosol from the gas-phase reaction of catechol (1,2-dihydroxybenzene) with ozone has been studied in two smog chambers. Aerosol production was monitored using a scanning mobility particle sizer and loss of the precursor was determined by gas chromatography and infrared spectroscopy, whilst ozone concentrations were measured using a UV photometric analyzer. The overall organic aerosol yield (Y) was determined as the ratio of the suspended aerosol mass corrected for wall losses (M_o) to the total reacted catechol concentrations, assuming a particle density of 1.4 g cm^?3. Analysis of the data clearly shows that Y is a strong function of M_o and that secondary organic aerosol formation can be expressed by a one-product gas–particle partitioning absorption model. The aerosol formation is affected by the initial catechol concentration, which leads to aerosol yields ranging from 17% to 86%. The results of this work are compared to similar studies reported in the literature.     

Organochlorine and heavy metals in newborns: Results from the Flemish Environment and Health Survey (FLEHS 2002–2006)

To collect regional information on internal levels of pollutants in humans in Flanders, 1196 mother–child pairs were systematically recruited in 2002–2003 via 25 maternities across Flanders. Cd, Pb, PCB congeners 118, 170, 138, 153 and 180, p,p′-DDE — a key metabolite of DDT- and hexachlorobenzene (HCB) were measured in cord blood or plasma. Cd was detected in 64% of the samples (geometric mean 0.21 µg/L cord blood). p,p′-DDE (110 ng/g plasma lipids) and Pb (14.7 µg/L blood), were measurable in nearly all samples. The individual PCB congeners could be detected in 40 to 81% of the newborns (138 + 153 + 180 = 64.4 ng/g plasma lipids). HCB (18.9 ng/g plasma lipids) and dioxin-like compounds measured by DR-CALUX® (23 pg CALUX-TEQ/g lipids) were above detection limit in more than 75% of the samples. Age and smoking habits of the mothers, did not influence the cord blood Pb and Cd levels. The organochlorines increased 4 to 9% per year of the mother's age (partial R² = 0.05 to 0.22). Mothers had 2.6% less PCBs in cord blood (partial R² = 0.02) for each unit increase in pre-pregnancy BMI. Season of delivery, breastfeeding previous children or consumption of local dairy products, were minor determinants. Up to 20% of the variability in organochlorine concentrations was explained by residence area. It was concluded that the place of birth in Flanders is an important determinant of the load of pollutants measured at the start of life. This underlines the validity of human biomonitoring on (relatively) small geographical scale.     

On the influence of environmental factors on harvest: the French Guiana shrimp fishery paradox

Environmental Economics and Policy Studies - The purpose of this paper is to investigate the environmental nature of the French Guiana shrimp fishery dynamics through an empirical analysis. To do...