特低渗透油层含油污水处理工艺新技术

针对大庆油田低渗透油层水处理工艺存在的问题,设计了金刚砂过滤工艺。进行过滤效果及现场应用稳定性试验,通过工艺的调整及参数的优化,使其出水指标稳定,确定其最佳滤速、反洗再生、级配等运行工艺参数。并对其技术、经济性评价分析,确定为适合油田的精细过滤技术。     

大气中黑碳的健康效应及机制研究进展

虽然人类社会不断进步发展,但大量工业和自然排放也导致了严重的空气污染。大气颗粒物是大气污染物的主要成分之一,黑碳是其中的重要组成成分,被国际癌症研究机构(IARC)归类为2B类致癌物。黑碳可以吸附其他致癌物质,会对环境和人体健康产生不利影响,因此黑碳暴露对人类的危害得到越来越多的重视。空气中黑碳的水平与心血管、呼吸和神经系统疾病的发生都有关系;黑碳主要通过引起氧化应激和炎症反应,诱发基因突变等一系列损伤。虽然现今对于黑碳健康效应的研究已取得了一些进展,但研究多数处于起步阶段,且仅针对黑碳本身进行单独研究,未来还需要加强开展对黑碳和其他污染物联合毒性效应及机制的研究。本综述主要针对近年来已开展的研究进行了总结归纳。     

低剂量丙烯酰胺多世代持续暴露对秀丽隐杆线虫的损伤作用

论文研究了丙烯酰胺(acrylamide,AA)低剂量多代持续暴露对模式生物秀丽隐杆线虫(Caenorhabditis elegans,C.elegans)的发育、生殖、寿命和捕食行为能力的影响。将线虫暴露于不同剂量水平的AA中,检测对当代线虫的发育周期、后代数量、寿命和捕食行为的影响,结果显示,1.0 mmol·L~(-1)AA水平可诱发当代线虫发育周期延长和后代数量减少(P 0.05),0.05mmol·L~(-1)和0.001 mmol·L~(-1)水平可分别诱发捕食行为能力下降和寿命缩短(P0.05)。进一步选取对当代线虫不产生明显损伤效应的AA剂量,将线虫进行多代持续暴露处理,结果显示,0.01 mmol·L~(-1)AA分别可在第2代g1和第3代g2诱发发育周期延长和后代数量减少(P0.05),0.005 mmol·L~(-1)AA可在第2代g1引起摄食行为能力下降,0.0001 mmol·L~(-1)(约7μg·L~(-1),低于推测人的平均AA暴露水平)的AA在第2代g1即可诱发寿命缩短(P0.05)。以上结果表明AA生物学毒性可以在后代间积累,极低剂量AA多代持续暴露仍可诱发生物学损伤。     

反硝化除磷机理及电子受体研究进展

介绍了生物除磷的Comeau-Wentzel模式,这种模式在某种程度上能够解释生物除磷的机理,因此PAOs释磷和吸磷的Comeau-Wentzel模式被借鉴用以分析反硝化除磷的机理。在此基础上,总结近年来反硝化除磷的研究成果,阐述电子受体NOx-对反硝化除磷的影响:在厌氧区,只有当NO3-浓度较高时,厌氧释磷的效果才会受到影响;在缺氧区,硝酸盐能够做为反硝化除磷的电子受体,但硝酸盐浓度过高会明显降低磷去除速率;亚硝酸盐同样能够作为反硝化除磷的电子受体,前提是亚硝酸盐不超过临界抑制浓度。     

滤筒法测定水中悬浮物的实践

采用重量法用滤筒替代滤膜进行测定水中悬浮物的比对实验,实验结果表明:滤筒测定水中悬浮物比滤膜测定水中悬浮物更具有易恒重、测定误差小、准确度高、快速、简便、成本低等优点,适合水质监测应用。     

类二噁英多氯联苯生殖毒性的研究进展

类二噁英多氯联苯(DlPCBs)作为典型的环境内分泌干扰物,会干扰接触个体或其后代的内分泌功能,破坏机体的神经系统、免疫系统,尤其对生殖系统的影响最为明显,比如对生殖器官的形态与功能、生殖内分泌、原始生殖细胞及其受精和早期胚胎发育等产生严重影响,最终导致各种生殖系统疾病的发生。DlPCBs的蓄积性及半挥发性使其在环境中分布广泛,半衰期长的特点使其将对动物及人类的生存和健康造成难以想象的影响。本文综述了DlPCBs的分类与构成、一般性质、生殖毒性以及其可能的致病机理,并对DlPCBs生殖毒性机理研究的重点方向进行了展望。     

Aerosol size distributions in urban Jinan: Seasonal characteristics and variations between weekdays and weekends in a heavily polluted atmosphere

Aerosol size distributions, trace gas, and PM(2.5) concentrations have been measured in urban Jinan, China, over 6 months in 2007 and 2008, covering spring, summer, fall, and winter time periods. Number concentrations of particles (10-2,500 nm) were 16,200, 13,900, 11,200, and 21,600 cm(?-3) in spring, summer, fall, and winter, respectively. Compared with other urban studies, Jinan has higher number concentrations of accumulation-mode particles (100-500 nm) and particles (10-2,500 nm), but lower concentrations of ultrafine particles (10-100 nm). The number, surface and volume concentrations, and size distributions of particles showed obvious seasonal variation and are also influenced by traffic emissions. Through correlation analysis, traffic emissions are proposed to be a more important contributor to Atkien-mode and accumulation-mode particles than coal firing. Around midday, the presence of nanoparticles and new particle formation is limited to pre-existing particles from traffic emissions and the mass transport of particles from suburban and rural areas. Compared with other studies in urban areas of Europe and the USA, the variation of particle number concentration and related gas concentration in Jinan between weekdays and weekends is smaller and the reasons has been deduced.     

自然生态系统中含硫气体的产生机理与环境归趋

基于当前可获得的与该课题相关的资料 ,本文综述了陆地生态系统产生挥发性含硫气体的微观和宏观机理过程。讨论了控制生物硫气体产生的环境因素。阐述了含硫气体释放进入大气后的环境归趋     

Direct degradation of methylene blue by unactivated peroxymonosulfate: reaction parameters,kinetics, and mechanism

Environmental Science and Pollution Research - Advanced oxidation processes (AOPs) are efficient methods for water purification. However, there are few studies on using peroxymonosulfate (PMS) to...     

Study on dust–gas coupling pollution law and selection of optimal purification distance of air duct during tunneling process

During the excavation of high gas mine, gas and dust often exist at the same time. In order to ensure that the gas concentration remains within a safe range and minimize the risk of workers’ pneumoconiosis, we simulated the interaction mechanism of airflow, gas, and dust, explored the pollution law of gas and dust, and obtained the optimal purification distance (L_p) by the CFD method. The reliability of the numerical simulation was verified by field measurements. Firstly, the properties of the gas and dust affected the structure of the airflow field. At the same time, the change in the airflow field affected the concentration distributions of the gas and dust. During the diffusion process, some high-risk regions in which the gas or dust concentrations exceeded 0.80% or 200 mg/m³, respectively, were discovered. Moreover, we have found that the airflow velocity in the top region of the tunnel and at the intersection corner between the cutting face and tunnel wall was the main factor affecting the purification effects. When L_p = 5–8 m, the gas concentration remained below 0.50%. When L_p = 6 m, the dust concentration reached a minimum of 287.5 mg/m³. Therefore, the optimal purification distance was determined to be 6 m; in which case, the gas and dust concentrations decreased by 32.84% and 47.02%, respectively.