Magnesium production is considered to be one potential source of unintentional persistent organic pollutants (unintentional POPs). However, studies on the emissions of unintentional POPs from magnesium metallurgy are still lacking. Emissions of unintentional POPs, such as polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz) are covered under the Stockholm Convention. In this study, these emissions were investigated through a magnesium smelting process. Stack gas and fly ash samples from a typical magnesium plant in China were collected and analyzed to estimate the emissions of unintentional POPs from magnesium metallurgy. Emissions factors of 412 ng TEQ t−1 for PCDD/Fs, 18.6 ng TEQ t−1 for dl-PCBs, 3329 μg t−1 for PCNs, 820 μg t−1 for HxCBz, and 1326 μg t−1 for PeCBz were obtained in 2009. Annual emissions from magnesium metallurgy in China were estimated to be 0.46 g WHO-TEQ for PCDD/Fs and dl-PCBs, 1651 g for PCNs, 403 g for HxCBz and 653 g for PeCBz, respectively. 相似文献
● Mechanical behavior of MBT waste affected by loading rate was investigated.● Shear strength ratio of MBT waste increases with an increase in loading rate.● Cohesion is inversely related to loading rate.● Internal friction angles are positively related to loading rate.● MBT waste from China shows smaller range of φ. Mechanical biological treatment (MBT) technology has attracted increasing attention because it can reduce the volume of waste produced. To deal with the current trend of increasing waste, MBT practices are being adopted to address waste generated in developing urban societies. In this study, a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill, China, to evaluate the effect of loading rate on the shear strength parameters of MBT waste. The MBT waste samples exhibited an evident strain-hardening behavior, and no peak was observed even when the axial strain exceeded 25%. Further, the shear strength increased with an increase in the loading rate; the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure. Furthermore, the shear strength parameters of MBT waste were related to the loading rate. The relationship between the cohesion, internal friction angle, and logarithm of the loading rate could be fitted to a linear relationship, which was established in this study. Finally, the ranges of shear strength parameters cohesion c and effective cohesion c ´ were determined as 1.0–8.2 kPa and 2.1–14.9 kPa, respectively; the ranges of the internal friction angle φ and effective internal friction angle φ ´ were determined as 16.2°–29° and 19.8°–43.9°, respectively. These results could be used as a valuable reference for conducting stability analyses of MBT landfills. 相似文献
● The emission reduction causes significant change in organic aerosol composition.● The atmospheric oxidizing capacity improved during emission reduction.● The mixed oxygenated organic aerosol contributed higher during emission reduction. Organic aerosol (OA) is a major component of atmospheric particulate matter (PM) with complex composition and formation processes influenced by various factors. Emission reduction can alter both precursors and oxidants which further affects secondary OA formation. Here we provide an observational analysis of secondary OA (SOA) variation properties in Yangtze River Delta (YRD) of eastern China in response to large scale of emission reduction during Chinese New Year (CNY) holidays from 2015 to 2020, and the COVID-19 pandemic period from January to March, 2020. We found a 17% increase of SOA proportion during the COVID lockdown. The relative enrichment of SOA is also found during multi-year CNY holidays with dramatic reduction of anthropogenic emissions. Two types of oxygenated OA (OOA) influenced by mixed emissions and SOA formation were found to be the dominant components during the lockdown in YRD region. Our results highlight that these emission-reduction-induced changes in organic aerosol need to be considered in the future to optimize air pollution control measures. 相似文献
A total of 47 passive air samples and 25 soil samples were collected to study the temporal trend, distribution, and air–soil exchange of polychlorinated naphthalenes (PCNs) in Shanghai, China. Atmospheric PCNs ranged from 3.44 to 44.1 pg/m3 (average of 21.9 pg/m3) in summer and 13.6 to 153 pg/m3 (average of 40.0 pg/m3) in winter. In the soil samples, PCN concentrations were 54.7–1382 pg/g dry weight (average of 319 pg/g). Tri-CNs and tetra-CNs were two dominant homolog groups in air samples, while di-CNs were also found at comparable proportions to tri-CNs and tetra-CNs in soil samples. Most air and soil samples from the industrial and urban areas showed higher PCN concentrations than those from suburban areas. However, some soil samples in urban centers presented higher PCN concentrations than industrial areas. Analysis of PCN sources indicated that both industrial thermal process and historical usage of commercial PCN mixtures contributed to the PCN burden in most areas. The fugacity fraction results indicated a strong tendency of volatilization for lighter PCNs (tri- to hexa-CNs) in both seasons, and air–soil deposition for octa-CNs. Moreover, air–soil exchange fluxes indicate that soil was an important source of atmospheric PCNs in some areas. The results of this study provide information for use in the evaluation of the potential impact and human health risk of PCNs around the study areas.