Pesticide residue removal in classic domestic processing of tomato and its effects on product quality

This study was undertaken to evaluate the effectiveness of several household practices (washing with water or acidic, alkaline, and oxidizing solutions, and peeling) in minimizing pesticide residue contamination of tomatoes, as well as the impact on the quality of the treated fruit. Tests were performed using two systemic fungicides (azoxystrobin and difenoconazole) and one contact fungicide (chlorothalonil). Solid-liquid extraction with low temperature partition (SLE/LTP) and liquid-liquid extraction with low temperature partition (LLE/LTP) were used to prepare the samples for pesticides determination by gas chromatography. Washing the tomatoes with water removed approximately 44% of chlorothalonil, 26% of difenoconazole, and 17% of azoxystrobin. Sodium bicarbonate (5%) and acetic acid (5%) solutions were more efficient, removing between 32 and 83% of the residues, while peeling removed from 68 to 88% of the pesticides. The washing solutions altered some fruit quality parameters, including acidity and chroma, and also caused weight loss. Acetic acid (0.15 and 5%) and hypochlorite (1%) solutions had the greatest effect on these parameters.     

Renewable energy sources: conflicts and opportunities in a changing landscape

Regional Environmental Change - Replacement of conventional energy sources with renewables such as solar panels and wind turbines requires adequate land. Impact assessments should be conducted to...     

Atrazine contamination in agricultural soils from the Yangtze River Delta of China and associated health risks

Atrazine is one of the most widely applied and persistent herbicides in the world. In view of limited information on the regional contamination of atrazine in soils in China, this study investigated the spatial distribution and environmental impacts of atrazine in agricultural soils collected from the Yangtze River Delta (YRD) as an illustrative analysis of rapidly developing regions in the country. The results showed that the concentrations of atrazine in the YRD agricultural soils ranged from <1.0 to 113 ng/g dry weight, with a mean of 5.7 ng/g, and a detection rate of 57.7 % in soils. Pesticide factory might be a major source for the elevated levels of atrazine in Zhejiang Province. The contamination of atrazine was closely associated with land use types. The concentrations and detection rates of atrazine were higher in corn fields and mulberry fields than in rice paddy fields. There was no significant difference in compositions of soil microbial phospholipids fatty acids among the areas with different atrazine levels. Positive relationship (R = 0.417, p < 0.05, n = 30) was observed between atrazine and total microbial biomass. However, other factors, such as soil type and land management practice, might have stronger influences on soil microbial communities. Human health risks via exposure to atrazine in soils were estimated according to the methods recommended by the US EPA. Atrazine by itself in all the soil samples imposed very low carcinogenic risks (<10^?6) and minimal non-cancer risks (hazard index <1) to adults and children.     

改性膨润土联合混凝剂处理微污染水中有机物

采用十二烷基多糖苷季铵盐作为改性剂制备改性膨润土,研究了改性膨润土联合混凝剂去除有机物的效果,考察了有机改性剂用量、微波辐射功率、辐射时间、膨润土投加量、pH值对有机物去除效果的影响,探讨了改性膨润土的改性和去除机理。结果表明,经微波改性后,实现了十二烷基多糖苷季铵盐阳离子对膨润土的插层,增大了层间距,提高了膨润土的吸附性能。联合混凝剂投加改性膨润土能够改善絮凝性能,显著提高有机物的去除效果。在最佳条件下,改性膨润土与PAC联合后的强化混凝,对初始浓度15.3 mg/L的微污染水中有机物的去除率达到95%以上,吸附符合Freundlich吸附等温方程。     

春季香溪河库湾CODMn时空分布及其影响因子初探

于2012年春季在香溪河库湾合理布置断面观测,分析水体高锰酸盐指数(CODMn)的时空分布特征,并对CODMn与水体中叶绿素a、溶解氧(DO)、水体垂向稳定系数、总氮(TN)和溶解性硅酸盐(D Si)进行相关分析,以期为香溪河流域有机污染的治理提供支持和指导。结果表明：春季香溪河库湾CODMn浓度变化范围为1.40～5.36 mg/L,4月CODMn均值明显高于3月和5月,为366 mg/L,整个春季CODMn浓度从下游至上游呈现明显增大的趋势。相关分析发现,春季水华暴发期间,CODMn与叶绿素a显著正相关(分别为072和074),而在未暴发水华的3月二者的相关性不显著。浮游植物和水体稳定系数是影响CODMn变化的主要因素。倒灌异重流使得高含氮、低CODMn浓度的长江干流水体进入库湾下游并稀释CODMn浓度。CODMn与DO在3月和5月的弱相关关系为香溪河CODMn特殊的分布特征提供了其它合理的解释,其分布特征受多种因素的共同影响。春季库湾上游有机污染趋于恶化,限制支流特别是上游污染物的排放是改善有机污染现状的有效途径     

Comparative Thermodynamic Study on the Contribution of the Autocondensation and Copolymerization Reactions for the Tannins of the Subspecies of Acacia nilotica

Autocondensation and copolymerization reactions of the Acacia nilotica subspecies tomentosa (Ant) and the subspecies adansonii (Ana) tannins extracts solutions have been studied at several pH values by thermomechanical analyzer. Results of chemical analysis of these tannins revealed that the studied tannins, Ant and Ana contained high percentages of extractable tannins (54 and 57 %) for and polyphenolic materials (78 and 80 %) respectively. Different hardeners such as paraformaldehyde, Urea and pMDI were added at different ratios and their polycondensation reactions was studied and compared with their autocondensation ones. The aim was to evaluate the tannins suitability for the production of commercially and technically viable tannin adhesives with reduced Formaldehyde emission for wood products and to study the interference between the autocondensation and the copolymerization reaction. The obtained results of autocondensation reaction for both of the tannins studied showed that the best Young’s modulus values for Ant (3,500 and 2,750 MPa) and Ana (2,650 and 2,620 MPa) were obtained at pH 5 and 7. The Young’s modulus values obtained by the tannins Ant were higher than those achieved by Ana. This indicates that the Ant is more reactive than Ana. These results were also in line with results achieved by the gel time for both of the tannins. Gel time results indicate that the reactivity of both tannins increased towards alkalinity with Ana being more reactive at alkaline pH. Addition of 8 % of paraformaldehyde was adversely affecting the autocondensation reactions, as the best Young’s modulus values were achieved at pH 4 for Ant tannins. As for Ana the higher Young’s modulus values (2,000 and 2,310 MPa) were achieved at pH 5 and 7. This indicates that autocondensation reaction was contributed to the final network of the copolymerization reaction. When smaller ratio of paraformaldehyde and Urea (5 %) was added to Ant tannins it favors the autocondensation reaction and the best Young’s modulus values were obtained at pH 5 and 7. Addition of pMDI (10–30 %) was found to decrease the temperature of copolymerization and the obtained Young’s modulus values by Ant were lower than those obtained by autocodensation reaction. Best Young’ modulus values were obtained by Ant at pH 5 and 7. Ana gave the best Young’s modulus values at pH 4 and 5 indicating that the autocondensation appears to depress the copolymerization reactions. The obtained results by both reactions were very important from technical and economical point of view as they concluded that it is very possible to produce adhesives system with zero emission depending on the tannins autocondensation reaction and pH values. Reduction of formaldehyde emission was also possible upon addition of smaller amount of paraformaldehyde and Urea.     

Concentration and health risk evaluation of heavy metals in market-sold vegetables and fishes based on questionnaires in Beijing,China

Concentrations of heavy metals (As, Cd, Pb, Cu, Ni, Fe, Mn, and Zn) in market vegetables and fishes in Beijing, China, are investigated, and their health risk to local consumers is evaluated by calculating the target hazard quotient (THQ). The heavy metal concentrations in vegetables and fishes ranged from not detectable (ND) to 0.21 mg/kg fresh weight (f.w.) (As), ND to 0.10 mg/kg f.w. (Cd), and n.d to 0.57 mg/kg f.w. (Pb), with average concentrations of 0.17, 0.04, and 0.24 mg/kg f.w., respectively. The measured concentrations of As, Cd, Pb, Cu, Ni, Fe, Mn, and Zn are generally lower than the safety limits given by the Chinese regulation safety and quality standards of agriculture products (GB2762-2012). As, Cd, and Pb contaminations are found in vegetables and fishes. The exceeding standard rates are 19 % for As, 3 % for Cd, and 25 % for Pb. Pb contaminations are found quite focused on the fish samples from traditional agri-product markets. The paper further analyzed the health risk of heavy metals in vegetables and fishes respectively from supermarkets and traditional agri-product markets; the results showed that the fishes of traditional agri-product markets have higher health risk, while the supermarkets have vegetables of higher heavy metal risk, and the supervision should be strengthened in the fish supply channels in traditional agri-product markets.     

铁氧化物复合氧化铝催化臭氧化过程中溴酸盐的生成控制

以市售活性炭、硅藻土和氧化铝小球为载体,考察了负载铁基活性组分对催化臭氧化过程中溴酸盐的控制情况,其中,铁基复合氧化铝小球体现出更好的溴酸盐还原特性和催化剂稳定性,证实催化剂中铁氧化物是溴酸盐得到有效控制的主要活性组分。进一步考察了铁基复合氧化铝小球催化臭氧化处理实际原水过程中对溴酸盐的生成控制,以及反应过程中溶解性有机碳（DOC）的去除情况。结果表明,与单独臭氧化相比,该催化剂既能有效去除水中的溶解性有机物,又能明显抑制溴酸盐的生成,反应50h,其活性并没有明显下降。催化剂失活主要归因于吸附位点数量的下降,可以通过负载铁氧化物来实现催化剂的再生。     

Biodegradability of Epoxidized Soybean Oil Based Thermosets in Compost Soil Environment

In this study, bio-thermoset from epoxidized soybean oil (ESO) was prepared in the presence of methylhexahydrophthalic anhydride curing agent and 2-ethyl-4-methylimidazole catalyst. The crosslink densities of the synthesized ESO are ranged from 0.109 × 10^?3 to 0.308 × 10^?3 mol/cm³. The ESO bio-thermosets were exposed to the soil-burial test for 8 months. Weight change and morphology of the degraded ESO specimens were assessed. It was found that the weight loss of ESO was governed by the materials compositions, crosslink density and the soil-burial exposure time. The 3 mm thickness ESO bio-thermosets with crosslink density of 0.109 × 10^?3 mol/cm³ had fully biodegraded after soil-burial for 6 months. In addition, 16S rDNA sequencing was carried out to identify the soil microorganisms. It was suggested that Comamonas sp., Bacillus sp., Streptomyces sp. and Acinetobacter sp. are the possible soil microbes that degrade the ESO bio-thermosets in the compost soil environment.     

Concentrations,atmospheric partitioning,and air–water/soil surface exchange of polychlorinated dibenzo-p-dioxin and dibenzofuran along the upper reaches of the Haihe River basin,North China

Polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) were overall measured and compared in ambient air, water, soils, and sediments along the upper reaches of the Haihe River of North China, so as to evaluate their concentrations, profiles, and to understand the processes of gas–particle partitioning and air–water/soil exchange. The following results were obtained: (1) The average concentrations (toxic equivalents, TEQs) of 2,3,7,8-PCDD/PCDF in air, water, sediment, and soil samples were 4,855 fg/m³, 9.5 pg/L, 99.2 pg/g dry weight (dw), and 56.4 pg/g (203 fg TEQ/m³, 0.46 pg TEQ/L, 2.2 pg TEQ/g dw, and 1.3 pg TEQ/g, respectively), respectively. (2) Although OCDF, 1,2,3,4,6,7,8-HpCDF, OCDD, and 1,2,3,4,6,7,8-HpCDD were the dominant congeners among four environmental sinks, obvious discrepancies of these congener and homologue patterns of PCDD/PCDF were observed still. (3) Significant linear correlations for PCDD/PCDF were observed between the gas–particle partition coefficient (K _p) and the subcooled liquid vapor pressure (P _L ⁰) and octanol–air partition coefficient (K _oa). (4) Fugacity fraction values of air–water exchange indicated that most of PCDD/PCDF homologues were dominated by net volatilization from water into air. The low-chlorinated PCDD/PCDF (tetra- to hexa-) presented a strong net volatilization from the soil into air, while high-chlorinated PCDD/PCDF (hepta- to octa-) were mainly close to equilibrium for air–soil exchange.