Estimation of contribution from non-point sources to perfluorinated surfactants in a river by using boron as a wastewater tracer

The contribution of non-point sources to perfluorinated surfactants (PFSs) in a river was evaluated by estimating their fluxes and by using boron (B) as a tracer. The utility of PFSs/B as an indicator for evaluating the impact of non-point sources was demonstrated. River water samples were collected from the Iruma River, upstream of the intake of drinking water treatment plants in Tokyo, during dry weather and wet weather, and 13 PFSs, dissolved organic carbon (DOC), total nitrogen (TN), and B were analyzed. Perfluorohexane sulfonate (PFHxS), perfluorooctane sulfonate (PFOS), perfluoroheptanoate (PFHpA), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUA), and perfluorododecanoate (PFDoDA) were detected on all sampling dates. The concentrations and fluxes of perfluorocarboxylates (PFCAs, e.g. PFOA and PFNA) were higher during wet weather, but those of perfluoroalkyl sulfonates (PFASs, e.g. PFHxS and PFOS) were not. The wet/dry ratios of PFSs/B (ratios of PFSs/B during wet weather to those during dry weather) agreed well with those of PFS fluxes (ratios of PFS fluxes during wet weather to those during dry weather), indicating that PFSs/B is useful for evaluating the contribution from non-point sources to PFSs in rivers. The wet/dry ratios of PFOA and PFNA were higher than those of other PFSs, DOC, and TN, showing that non-point sources contributed greatly to PFOA and PFNA in the water. This is the first study to use B as a wastewater tracer to estimate the contribution of non-point sources to PFSs in a river.     

Decolorization and estrogenic activity of colored livestock wastewater after electrolysis treatment

Livestock wastewater is treated by activated sludge treatment. Untreated livestock wastewater has high estrogen activity because animal excreta contains estrogen. When activated sludge treatment is applied, the estrogen activity declines or is lost. However, the color of treated livestock wastewater is deep brownish-red because of the decomposition of organic compounds or the synthesis of metabolites. Discharging colored wastewater to the environment could cause some problems, so it is necessary to decolorize colored wastewater before it is discharged. It has been suggested that electrolysis decolorization technology is suitable for treating colored wastewater; however, the process produces volatile organic compounds (VOCs). In fact, little research has been conducted with reference to estrogen activity in wastewater that has undergone electrolysis, especially on the contribution of the electrolysis decolorization process to estrogen activity, i.e., the possibility of resynthesis of some substance with estrogen activity due to resolved and metabolized colored components. In this study, the concentration of VOC was measured for various electrolysis conditions, and estrogen activity was examined using a yeast two-hybrid assay. From the results, decolorization of colored livestock wastewater by electrolysis was possible, and the VOC generation during electrolysis could be controlled depending on the electrolysis conditions. Estrogen activity in colored livestock wastewater disappeared on electrolysis decolorization.     

Migration of C in the paddy soil-to-rice plant system after C-acetic acid breakdown by microorganisms below the plow layer

Migration of ¹⁴C derived from ¹⁴C-acetic acid was examined by using soils sampled from paddies in four administrative areas in Japan (Aomori, Yamanashi, Ehime and Okinawa) and rice plant in a tracer experiment to understand the fate of ¹⁴C in the paddy soil-to-rice plant system. The loss of ¹⁴C radioactivity levels derived from ¹⁴C-acetic acid was caused by soil microorganism breakdown. A part of the ¹⁴C fixation to soil was caused by microbial assimilation into the fatty acid fraction. ¹⁴C moved upward via two different types of ¹⁴C dynamics in soil: quick movement upward; and constant but slow movement upward. ¹⁴C was highly assimilated into the plant panicle and that was caused by the root-uptake and the transfer of ¹⁴C. Migration of ¹⁴C derived from ¹⁴C-acetic acid relied heavily upon changes of chemical forms and characteristics of ¹⁴C-compound as caused by microorganisms in soil.     

Preliminary estimations of energy and cost for CO2 recovery by a membrane flash process utilizing waste thermal energy

The membrane flash process utilizing waste thermal energy was developed to achieve an energy-saving technology and to substitute it for a conventional regenerator. The operating conditions of the membrane flash at high temperature were studied. The petroleum refining process and iron manufacturing process were proposed for candidate processes that actually had waste energy sources. The DEA concentration and the flashing pressure had optimum values to improve the performance and reduce the energy consumption for CO₂ recovery. Energy consumptions and costs for CO₂ recovery in the membrane flash and chemical absorption were estimated by a process simulator and discussed under the same conditions. The membrane flash can achieve lower energy capture than the chemical absorption for the above industrial processes. The membrane flash is suitable for the CO₂ emission sources that had high CO₂ concentration independently of the plant scale. The chemical absorption can be applied if the plant scale is large and also the CO₂ concentration is low.     

The treatment of infectious waste arising from home health and medical care services: present situation in Japan

The management of waste materials arising from home health and medical care services (HHMC wastes) in Japan is now receiving greater attention from governmental workers dealing with general household waste materials. In general, HHMC waste materials are collected in a mixed form, transported and disposed of along with municipal solid wastes. As a result, municipal workers are suffering needle stick accidents so that infections associated with HHMC waste materials may occur. The collection and transportation by patients and their families of HHMC waste materials with sharp-edges, such as injection needles, to medical-related facilities can prevent municipal workers from experiencing needle-prick accidents. One of the most important strategies for medical-related facilities is hence the education of patients and their families. Improved rules for handling HHMC waste materials are essential for the safe and effective management.     

Regional and seasonal characteristics of emission sources of fine airborne particulate matter collected in the center and suburbs of Tokyo, Japan as determined by multielement analysis and source receptor models

Airborne particulate matter, suspected to induce adverse effects on human health, have been one of the most important concerns regarding recent air pollution issues in Japan. To characterize regional and seasonal variations in emission sources of fine airborne particulate matter (d < 2 microm), monthly samples (n = 36 for each site) were collected at urban (Tokyo), suburban (Maebashi), and mountainous (Akagi) sites in Japan from April 2003 to March 2006. Multielement analysis of chemical species (Na, Al, K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Sb, and Pb) was performed by inductively coupled plasma-atomic emission spectrometry and inductively coupled plasma-mass spectrometry. The combined source receptor model, which consists of positive matrix factorization and chemical mass balance, determined the contributions of nine emission sources (local and continental soils, road dust, coal and oil combustion, waste incineration, steel industry, brake wear, and diesel exhaust) to the observed elemental concentrations. Large regional differences were identified in the source contributions among the observational sites. Diesel exhaust was identified as the most significant source (70% of identified contributions) at the urban site. Local and continental soils, coal combustion, and diesel exhaust were intricately assigned (20-30% each) to the suburban site. Continental soil was the predominant source (65%) at the mountainous site. Respective significant source contributions dominated the seasonal variations of total elemental concentrations at each site. These results suggest that a better understanding of the regional and seasonal characteristics of impacting emission sources will be important for improving regional environments.     

Simultaneous determination of seven anticoagulant rodenticides in agricultural products by gel permeation chromatography and liquid chromatography–tandem mass spectrometry

A sensitive and reliable method for the simultaneous determination of hydroxycoumarin-type (brodifacoum, bromadiolone, coumatetralyl, and warfarin) and indandione-type (chlorophacinone, diphacinone, and pindone) rodenticides in agricultural products by gel permeation chromatography (GPC) and liquid chromatography–tandem mass spectrometry (LC–MS/MS) was developed. The procedure involved extraction of the rodenticides from samples with acetone, followed by liquid–liquid partitioning with hexane/ethyl acetate (1:1, v/v) and 10% sodium chloride aqueous solution, then cleanup using GPC, and finally, analysis using LC–MS/MS. High recoveries from the GPC column were obtained for all rodenticides tested using a mobile phase of acetone/cyclohexane/triethylamine (400:1600:1, v/v/v). An ODS column, which contains low levels of metal impurities, gave satisfactory peak shapes for both hydroxycoumarin- and indandione-type rodenticides in the LC–MS/MS separation. The average recoveries of rodenticides from eight agricultural foods (apple, eggplant, cabbage, orange, potato, tomato, brown rice, and soybean) fortified at 0.0005–0.001 mg/kg ranged from 76 to 116%, except for bromadiolone in orange (53%) and diphacinone in soybean (54%), and the relative standard deviations ranged from 1 to 16%. The proposed method effectively removed interfering components, such as pigments and lipids, and showed high selectivity. In addition, the matrix effects were negligible for most of the rodenticide/food combinations. The results suggest that the proposed method is reliable and suitable for determining hydroxycoumarin- and indandione-type rodenticides in agricultural products.     

Sensitivity analyses of factors influencing CMAQ performance for fine particulate nitrate

Improvement of air quality models is required so that they can be utilized to design effective control strategies for fine particulate matter (PM_2.5). The Community Multiscale Air Quality modeling system was applied to the Greater Tokyo Area of Japan in winter 2010 and summer 2011. The model results were compared with observed concentrations of PM_2.5 sulfate (SO₄^2-), nitrate (NO₃^?) and ammonium, and gaseous nitric acid (HNO₃) and ammonia (NH₃). The model approximately reproduced PM_2.5 SO₄^2? concentration, but clearly overestimated PM_2.5 NO₃^? concentration, which was attributed to overestimation of production of ammonium nitrate (NH₄NO₃). This study conducted sensitivity analyses of factors associated with the model performance for PM_2.5 NO₃^? concentration, including temperature and relative humidity, emission of nitrogen oxides, seasonal variation of NH₃ emission, HNO₃ and NH₃ dry deposition velocities, and heterogeneous reaction probability of dinitrogen pentoxide. Change in NH₃ emission directly affected NH₃ concentration, and substantially affected NH₄NO₃ concentration. Higher dry deposition velocities of HNO₃ and NH₃ led to substantial reductions of concentrations of the gaseous species and NH₄NO₃. Because uncertainties in NH₃ emission and dry deposition processes are probably large, these processes may be key factors for improvement of the model performance for PM_2.5 NO₃^?.

Implications: The Community Multiscale Air Quality modeling system clearly overestimated the concentration of fine particulate nitrate in the Greater Tokyo Area of Japan, which was attributed to overestimation of production of ammonium nitrate. Sensitivity analyses were conducted for factors associated with the model performance for nitrate. Ammonia emission and dry deposition of nitric acid and ammonia may be key factors for improvement of the model performance.     

Blood levels of PCDDs,PCDFs, and coplanar PCBs in Yusho mothers and their descendants: Association with fetal Yusho disease

Maternal exposure to polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) may result in adverse health effects in their children. In Japan in 1968, an accidental human exposure to rice oil contaminated with PCDDs, PCDFs, and PCBs, led to the development of Yusho disease. Yusho mothers delivered descendants with low birth weights and hyperpigmented skin and mucosa, which are characteristic of fetal Yusho disease (FYD). The Yusho cohort was used to evaluate the effect of maternal exposure to PCDDs, PCDFs, and PCBs on the development of FYD. Blood samples, obtained from 64 Yusho mothers (117 descendants: 10 with FYD and 107 without FYD), were analyzed for congeners of seven PCDDs, 10 PCDFs, and four coplanar PCBs. We investigated the association between the maternal estimated blood levels of dioxins at delivery and the risk of fetal Yusho disease. We also studied the differences in dioxin blood levels in 24 mother–descendant pairs (5 with FYD and 19 without FYD). The estimated levels of total PCDD TEQ, total PCDF TEQ, total coplanar PCB TEQ, and total TEQ in the maternal blood at delivery were associated with significantly increased risk of FYD. The odds ratios, which present the risk of FYD for a 10-fold increase in blood dioxin, were largest for 1,2,3,6,7,8-HexaCDD (odds ratio = 28.6, 95% confidence interval = 1.67–489.9, p = 0.02). The levels of 1,2,3,6,7,8-HexaCDD in both the Yusho mothers and their descendants with FYD were higher than the levels in those without FYD. These findings suggest that 1,2,3,6,7,8-HexaCDD is the most important causative congener for the development of FYD.     

Hybrid-Type Electrostatic Precipitator

Three experiments were designed to determine the effects of SO₂ concentration on two Southeastern oat varieties—Caroiee and Coker 227. The plants were grown under uniform conditions prior to and after the experimental growth period. During the 7 to 14 day experimental growth period the plants were subjected to four growth temperatures (18/14, 22/18, 26/22 and 30/26° C day/night temperatures) and exposed 2 or 4 times to specific concentrations of SO₂ (from 0 to 4 ppm) for 1.5 or 3.0 hr periods. In the first two experiments, the exposure temperatures were varied (18° to 30° C). In the third design, the exposure temperatures remained constant and two exposure relative humidities (55 and 80%) were used. Injury and growth reductions were more severe in Coker 227 than in Caroiee. Root dry weight (RDW) was affected more than top dry weight (TDW). Plants were more sensitive at the higher growth temperatures. Exposure temperatures had little to variable effects. Plants were more sensitive at 80% than at 55% relative humidity. Biomass was reduced at 0.4 ppm SO₂ after four 3 hr exposures and at 0.75 ppm after two 1.5 hr exposures, but growth was also increased as often. These concentrations approached the accepted threshold for adverse effects to sensitive vegetation. Foliar injury was highly correlated with growth reductions.