Assessment of vulnerability of the eastern Cretan beaches (Greece) to sea level rise

Beaches are both sensitive and critical components of the coastal systems, as they are particularly vulnerable to environmental change (e.g., the sea level rise) and form valuable coastal ecosystems and economic resources. The objective of the present study has been to record the spatial characteristics and other attributes (e.g., topography, sediments and accessibility) of the 71 beaches of the E. Crete (Eastern Mediterranean) that are either already developed or have a reasonable development potential and assess their erosion risk under sea level rise. Beach retreats are predicted by ensembles of six cross-shore (1D) analytical and numerical morphodynamic models, set up/forced on the basis of collected/collated information and three sea level rise scenarios (0.26, 0.82 and 1.86 m); these retreats are then compared with the recorded maximum (dry) beach widths. Projections by the unified ensemble suggest that, in the case of a 0.26 m rise, 80 % of the examined beaches are to retreat by more than 20 and 16 % by more than 50 % of their maximum dry width. In the case of a 0.82 m rise, 72 % of the tested beaches are predicted to retreat by more than 50 % of their dry width and 21 % by a distance at least equal to their observed maximum dry widths. A sea level rise of 1.86 m represents a ‘doom’ scenario, as 75 % of the beaches are predicted to retreat by more than their maximum width. These results may be conservative, as other significant beach erosion factors (e.g., decreasing beach sediment supply) have not been considered.     

Chemical Characterization of Emissions from Vegetable Oil Processing and Their Contribution to Aerosol Mass Using the Organic Molecular Markers Approach

ABSTRACT

The organic fraction of aerosol emitted from a vegetable oil processing plant was studied to investigate the contribution of emissions to ambient particles in the surrounding area. Solvent-soluble particulate organic compounds emitted from the plant accounted for 10% of total suspended particles. This percentage was lower in the receptor sites (less than 6% of total aerosol mass). Nonpolar, moderate polar, polar, and acidic compounds were detected in both emitted and ambient aerosol samples. The processing and combustion of olive pits yielded a source with strong biogenic characteristics, such as the high values of the carbon preference index (CPI) for all compound classes. Polycyclic aromatic hydrocarbons (PAHs) detected in emissions were associated with both olive pits and diesel combustion. The chromatographic profile of dimethyl-phenanthrenes (DMPs) was characteristic of olive pit combustion. Organic aerosols collected in two receptor sites provided a different pattern.

The significant contribution of vehicular emissions was identified by CPI values (~1) of n-alkanes and the presence of the unresolved complex mixture (UCM). In addition, PAH concentration diagnostic ratios indicated that emissions from catalyst and noncatalyst automobiles and heavy trucks were significant. The strong even-to-odd predominance of n-alkanols, n-alkanoic acids, and their salts indicated the contribution of a source with biogenic characteristics. However, the profile of DMPs at receptor sites was similar to that observed for diesel particulates. These differences indicated that the contribution of vegetable oil processing emissions to the atmosphere was negligible.     

Key parameters and practices controlling pesticide degradation efficiency of biobed substrates

We studied the contribution of each of the components of a compost-based biomixture (BX), commonly used in Europe, on pesticide degradation. The impact of other key parameters including pesticide dose, temperature and repeated applications on the degradation of eight pesticides, applied as a mixture, in a BX and a peat-based biomixture (OBX) was compared and contrasted to their degradation in soil. Incubation studies showed that straw was essential in maintaining a high pesticide degradation capacity of the biomixture, whereas compost, when mixed with soil, retarded pesticide degradation. The highest rates of degradation were shown in the biomixture composed of soil/compost/straw suggesting that all three components are essential for maximum biobed performance. Increasing doses prolonged the persistence of most pesticides with biomixtures showing a higher tolerance to high pesticide dose levels compared to soil. Increasing the incubation temperature from 15 °C to 25 °C resulted in lower t(1/2) values, with biomixtures performing better than soil at the lower temperature. Repeated applications led to a decrease in the degradation rates of most pesticides in all the substrates, with the exception of iprodione and metalaxyl. Overall, our results stress the ability of biomixtures to perform better than soil under unfavorable conditions and extreme pesticide dose levels.     

The potential for aeration of MSW landfills to accelerate completion

Landfilling is a popular waste disposal method, but, as it is practised currently, it is fundamentally unsustainable. The low short-term financial costs belie the potential long-term environmental costs, and traditional landfill sites require long-term management in order to mitigate any possible environmental damage. Old landfill sites might require aftercare for decades or even centuries, and in some cases remediation may be necessary. Biological stabilisation of a landfill is the key issue; completion criteria provide a yardstick by which the success of any new technology may be measured. In order for a site to achieve completion it must pose no risk to human health or the environment, meaning that attenuation of any emissions from the site must occur within the local environment without causing harm. Remediation of old landfill sites by aerating the waste has been undertaken in Germany, the United States, Italy and The Netherlands, with considerable success. At a pilot scale, aeration has also been used in newly emplaced waste to accelerate stabilisation. This paper reviews the use of aerobic landfill worldwide, and assesses the ways in which the use of aerobic landfill techniques can decrease the risks associated with current landfill practices, making landfill a more sustainable waste disposal option. It focuses on assessing ways to utilise aeration to enhance stabilisation. The results demonstrated that aeration of old landfill sites may be an efficient and cost-effective method of remediation and allow the date of completion to be brought forward by decades. Similarly, aeration of newly emplaced waste can be effective in enhancing degradation, assisting with completion and reducing environmental risks. However, further research is required to establish what procedure for adding air to a landfill would be most suitable for the UK and to investigate new risks that may arise, such as the possible emission of non-methane organic compounds.     

A multicriteria-based methodology for site prioritisation in sediment management

Decision-making for sediment management is a complex task that incorporates the selections of areas for remediation and the assessment of options for any mitigation required. The application of Multicriteria Analysis (MCA) to rank different areas, according to their need for sediment management, provides a great opportunity for prioritisation, a first step in an integrated methodology that finally aims to assess and select suitable alternatives for managing the identified priority sites. This paper develops a methodology that starts with the delimitation of management units within areas of study, followed by the application of MCA methods that allows ranking of these management units, according to their need for remediation. This proposed process considers not only scientific evidence on sediment quality, but also other relevant aspects such as social and economic criteria associated with such decisions. This methodology is illustrated with its application to the case study area of the Bay of Santander, in northern Spain, highlighting some of the implications of utilising different MCA methods in the process. It also uses site-specific data to assess the subjectivity in the decision-making process, mainly reflected through the assignment of the criteria weights and uncertainties in the criteria scores. Analysis of the sensitivity of the results to these factors is used as a way to assess the stability and robustness of the ranking as a first step of the sediment management decision-making process.     

Comparison of bioluminescence and nitrification inhibition methods for assessing toxicity to municipal activated sludge

The aim of this study was to compare two alternative toxicity assessment methods to determine wastewater toxicity and predict treatment plant process upsets. The toxicity of two synthetic organic compounds (triclosan and 4-n-nonylphenol), which are commonly detected in municipal wastewater, and municipal and industrial wastewaters with different heavy metals content were evaluated by the nitrification inhibition assay and bioluminescence toxicity test. Comparison between both assays confirmed that Vibrio fischeri is generally more sensitive than autotrophic bacteria, and, if not calibrated, the bioluminescence method tends to overestimate toxic effects on activated sludge biomass. The nitrification inhibition assay appears to predict plant process upsets more accurately. Both methods showed a significant toxicity decrease through treatment that could be partially attributed to the significant heavy metals removal obtained by primary and secondary treatment. A good correlation for the two assays was obtained, as indicated by a high correlation coefficient (r2 = 0.80).     

Should the fashion industry confront the sustainability challenge with 3D prototyping technology

Abstract

In this paper, coming out of a broader research project on how the digital prototype can be effectively integrated in the product development process of the clothing industry, the authors investigate the relationship between Corporate Social Responsibility (CSR) and Collective Actions on Sustainability and the environmental impact of the new model of fast and accelerating fashion. Extensive research was contacted with personal interviews and analysed primary data shows how new technology solutions like Product Lifecycle Management (PLM), 3D visualisation or 3D prototyping can work with and across supply chain partners to reduce the environmental footprint of their processes. The final phase of the paper involves the conceptualisation of a new apparel product development model, encompassing various digital tools which aim at addressing fit problems, extending the useful life of clothes and reducing the environmental impact of clothing in use through design and services.     

Predicting photochemical pollution in an industrial area

In order to confront pollution events concerning the city of Elefsis, in the environmentally aggravated area of Thriassion Plain, an effort is undertaken to create a model forecasting maximal daily concentrations of NO(x) (NO(2)+NO), NO(2) and O(3). The data analyzed were obtained from the Bureau of Pollution Control and Environments Quality based in Elefsis. The model in question uses hourly values of the pollutants as well as meteorological data recorded at the center of the city of Elefsis from 1993 to 1999. Three fitting methods are utilized, namely ordinary least squares, piecewise, and quantile regression. The verification and reliability of the forecasting models are based on the measurements of the year 2000. The results are considered to be satisfactory, with the forecasted values following the general tendencies.     

Groundwater hydrogeochemistry of Trikala municipality, central Greece

Sixty-four samples from the groundwater resources of Trikala municipality, central Greece, were collected during two periods (2006 and 2007) and analyzed for physico-chemical parameters (temperature, pH, specific electrical conductivity, and total dissolved solids), major ions (Ca²⁺, Cl^?, HCO ₃ ^? , K⁺, Mg²⁺, Na⁺, NO ₃ ^? , SO ₄ ^2? ), and several potentially toxic elements (Al, B, Ba, Br, Ca, Ce, Cl, Cr, Cu, Fe, K, La, Li, Mg, Mn, Mo, Na, Nd, Ni, P, Pb, Rb, S, Sc, Si, Sn, Sr, U, V, Y, Zn). European Council directives and USEPA guidelines were used to assess the water quality. The results indicate that all samples are fresh water, suitable for human consumption. All basic ions and physico-chemical parameters have average concentrations below their recommended optimum limits with the exception of electrical conductivity, for January 2007, and nitrate for October 2006 and January 2007 sampling periods. This exceedance is the result of dissolution of minerals such as calcite and dolomite that are present in the surrounding rocks and the application of fertilizers, respectively. Lead is the only element with an average value that exceeds the recommended EC guideline, while special attention should be paid to one borehole (T9) which has elevated NO ₃ ^? values which may pose a risk to human health.     

Ecological assessments of surface water bodies at the river basin level: a case study from England

Ecological assessments of surface water bodies are essential in order to evaluate the level of degradation in freshwater ecosystems and to address the subsequent decline in services they provide. These assessments cover multiple aspects of the aquatic environment, particularly biological elements due to their ability to respond to all pressures within an ecosystem. Such assessments can enable the identification of the multiple pressures which threaten water bodies, facilitating sustainable decisions regarding their management to be identified. Here, the design requirements of the networks which facilitate ecological assessments are presented. A river basin district in England is used as a case study to investigate the number of elements monitored, the number of failing elements and the relationship between failing elements. Findings demonstrate the value of ensuring that monitoring networks are risk based and appropriately designed to meet their objectives. This therefore requires that monitoring is not only for the communicating of compliance but also for use iteratively so that the design of monitoring networks and ultimately management can be continually improved.