Trace metal concentration in scalp hair of occupationally exposed autodrivers

The concentrations of Cr, Pb, Zn, Cu, Ni and Cd wereanalyzed by Atomic Absorption Spectrophotometer in thescalp hair of professional male autodrivers who areoccupationally exposed to the vehicular/industrialpollutants in the industrial city of Coimbatore, TamilNadu. The unwashed hair samples when compared with thewashed hair showed a significantly higher levels of Cr,Zn and Pb. The correlation coefficient showed a strongmutual dependence on the scalp hair of the exposedindividuals and no correlation was found among the tracemetals except for Ni–Pb and Ni–Cd. The results ingeneral showed a positive exogenous contribution of allthe analyzed industrial trace metals. The drivers who are occupationally exposed to vehicular/industrial pollution are at risk.     

Chromium (VI) tolerance in two halotolerant strains of Nostoc

The present study reports on chromium (VI) tolerance of two cyanobacterial strains Nostoc linckia and Nostoc spongiaeforme isolated from salt affected soils using uni-algal and bi-algal systems. Besides distinct halophilism, the two strains exhibited remarkable tolerance to chromium (VI) and revealed 1.2 to 2.8 times more chlorophyll in the presence of the metal. While phycobilins and carotenoids also increased in Nostoc linckia with total dissolved salts (TDS) as well as metal, a decline was observed in Nostoc spongiaeforme in the presence of Cr (VI). Relative algal biomass (as % of control) showed significantly higher values (123-239) in Nostoc linckia in the presence of salt, metal and combination of the two. In Nostoc spongiaeforme it declined in the presence of metal (72-81) but increased in the presence of salts (143-249) and also in the binary systems (121-440). The bi-algal consortium showed relatively less tolerance to salt and metal stress. Nostoc linckia (20 day culture) showed upto 40% chromium removal whereas Nostoc spongiaeforme showed up to 12% removal, indicating greater suitability of the former for use in bioremediation studies.     

Coal Combustion Product: Nonhazardous Material for Mine Fill

As is the case in many other countries around the world, India's main source of electricity is coal‐fired power plants. In addition to providing energy, the burning of coal also results in large amounts of coal combustion products (CCP), the incombustible material, such as fly ash, left after the coal is burned. These materials are produced in large volume, and if they are not managed or utilized properly, they can pose a danger to the environment. This article discusses the uses of CCP, with a special emphasis on fly ash, and the role that it is currently playing and can continue to play as a mine filler for India's depleted opencast and underground coal mines.     

Characterization of Super Paramagnetic Nanoparticles Coated with a Biocompatible Polymer Produced by Dextransucrase from <Emphasis Type="Italic">Weissella cibaria</Emphasis> JAG8

Magnetic nanoparticles (MNPs) synthesised by chemical co-precipitation method was subjected to dextran coating by sonication method. The dextran was enzymatically synthesised by extracellular dextransucrase isolated from Weissella cibaria JAG8. The crystalline nature of MNPs and dextran coated MNPs were confirmed by X-ray diffraction studies with average particle size of 25 nm, which was confirmed further by high resolution transmission electron microscopy. The surface morphology of MNPs and dextran coated MNPs were monitored by scanning electron microscopy studies. The vibrating sample magnetometer investigation displayed the super paramagnetic nature of MNPs and dextran coated MNPs. FT-IR analysis of MNPs and dextran coated MNPs, displayed characteristic band of Fe–O bond at 582 cm^?1. Thermo-gravimetric analysis of MNPs and dextran coated MNPs (1:1) ratio displayed a weight loss of 15 and 18 %, which clearly indicated 3.0 % of dextran was coated on to the MNPs. The elemental composition study by scanning electron microscopy confirmed the association of dextran with MNPs. The in vitro effect of MNPs and dextran coated MNPs was performed on human colon cancer (HT-29) cell lines and the results showed that dextran coated: MNPs (2:1) displayed good biocompatibility results over dextran coated: MNPs (1:1) and un-coated MNPs.     

Superior photodecomposition of pyrene by metal ion-loaded TiO₂ catalyst under UV light irradiation

BACKGROUND: The photocatalytic degradation of pyrene under UV (125 W Hg-Arc, 10.4 mW/cm2) irradiation of TiO2 aqueous suspension has been found to be highly improved with the dissolved transition metal ions like Cu2+, Fe3+, Ag+, and Au3+, etc. As the reduction potential of these metals lies below the conduction band (CB) position (?0.1 eV) of TiO2, the photoexcited electron transfer occurs more readily and reduces electron–hole recombination rate. Therefore, it has a beneficial influence on the photocatalytic ability of TiO2 because of rapid Fermi energy equilibrium between the CB of TiO2 and its surface adsorbed metal ions. RESULTS AND DISCUSSION: The Fermi level is referred to as the electrochemical potential and plays an important role in the band theory of solids. When metal and semiconductor are in contact, electron migration from photoirradiated semiconductor to the deposited metal occurs at the interface until two Fermi levels equilibrate and enhanced the photocatalytic activity of semiconductor photocatalyst. Ni2+ having more negative reduction potential (?0.25 eV) than the CB of TiO2 imparts negligible co-catalytic activity to TiO2 photoreaction. It also revealed that loading of Au3+ ions displayed higher degradation rate of pyrene than Au photodeposition. Furthermore, when the amount of dissolved Fe+3 and Au3+ ions gradually increases from 0.1 to 2 wt.%, the pyrene photodecomposition rate also become faster.     

[1,3]oxazines: green synthesis by sonication using a magnetically-separable basic nano-catalyst and investigation of its activity against the toxic effect of a pesticide on the morphology of blood cells

Environmental Chemistry Letters - The demand for a cleaner environment has led chemists to develop greener protocols, notably by using catalysts. Encapsulation of an active substance on a solid...     

Adverse effects of chromium on amino acid levels in freshwater fish Clarias batrachus (Linn.)

Various heavy metals released into the rivers and lakes affect aquatic fauna including Clarias batrachus. Elevated levels of chromium (Cr) in aquatic organisms, especially fish, represent an ecological and human concern. Amino acid levels were estimated in five tissues (gills, liver, kidneys, muscle, and brain) of C. batrachus after 28 days of exposure to Cr. This study showed that Cr elevated levels of free amino acids in organs of fish C. batrachus, indicating a compensatory mechanism to counter sublethal metallic stress. Data suggest that the measurement of amino acids may serve as a biomarker for Cr toxicity in fish.     

Plasma treatment of air pollution control residues

Air pollution control (APC) residues from waste incineration have been blended with silica and alumina and the mix melted using DC plasma arc technology. The chemical composition of the fully amorphous homogeneous glass formed has been determined. Waste acceptance criteria compliance leach testing demonstrates that the APC residue derived glass releases only trace levels of heavy metals (Pb (<0.007mg/kg) and Zn (0.02mg/kg)) and Cl(-) (0.2mg/kg). These are significantly below the limit values for disposal to inert landfill. It is concluded that plasma treatment of APC residues can produce an inert glass that may have potential to be used either in bulk civil engineering applications or in the production of higher value glass-ceramic products.     

Extension of coupled multispecies metal transport and speciation (TRANSPEC) model to soil

Atmospheric deposition of metals emitted from mining operations has raised metal concentrations in the surrounding soils. This repository may be remobilized and act as a source of metals to nearby surface aquatic systems. It is important to understand metal dynamics and the impact of various chemistry and fate parameters on metal movement in the soil environment in order to evaluate risk associated with metals in terrestrial ecosystems and accurately establish critical discharge limits that are protective of aquatic biota. Here we extend our previously developed coupled multispecies metal fate-TRANsport and SPECiation/complexation (TRANSPEC) model, which was applicable to surface aquatic systems. The extended TRANSPEC, termed TRANSPEC-II, estimates the partition coefficient, K(d), between the soil-solid and -soluble phases using site-specific data and a semi-empirical regression model obtained from literature. A geochemical model calculates metal and species fractions in the dissolved and colloidal phases of the soil solution. The multispecies fugacity/aquivalence based fate-transport model then estimates inter-media transport rates such as leaching from soil, soil runoff, and water-sediment exchanges of each metal species. The model is illustratively applied to Ni in the Kelly Lake watershed (Sudbury, Ontario, Canada), where several mining operations are located. The model results suggest that the current atmospheric fallout supplies only 4% of Ni removed from soil through soil runoff and leaching. Soil runoff contributes about 20% of Ni entering into Kelly Lake with the rest coming from other sources. Leaching to groundwater, apart from runoff, is also a major loss process for Ni in the soil. A sensitivity analysis indicates that raising soil pH to above 6 may substantially reduce metal runoff and improve water quality of nearby water bodies that are impacted by runoff.