Heavy-duty,off-road diesel engine low-load particle number emissions and particle control

Exhaust gas particle and ion size distributions were measured from an off-road diesel engine complying with the European Stage IIIB emission standard. The measurements were performed at idling and low load conditions on an engine dynamometer. Nucleation-mode particles dominated the diesel exhaust particle number emissions at idle load. The nonvolatile nucleation-mode geometric mean diameter was detected at 10 nm or below. The nonvolatile nucleation-mode charge state implied that it has evolved through a highly ionizing environment before emission from the engine. The determined charging probabilities were 10.0 ± 2.2% for negative and 8.0 ± 2.0% for positive polarity particles. The nonvolatile nucleation particle concentration and size was also shown to be dependent on the lubricant oil composition. The particle emissions were efficiently controlled with a partial filter or with partial filter + selective catalytic reduction (SCR) combination. The particle number removal efficiencies of the aftertreatment systems were over 95% for wet total particle number (>3nm) and over 85% for dry particle total number. Nevertheless, the aftertreatment systems’ efficiencies were around 50% for the soot-mode particles. The low-load nonvolatile nucleation particle emissions were also dependent on the engine load, speed, and fuel injection pressure. The low load particle number emissions followed the soot-core trade-off, similar to medium or high operating loads.

Implications:Idling and low-load diesel engine exhaust emissions affect harmfully the ambient air quality. The low-load particle number emissions are here shown to peak in the 10-nm size range for a modern off-road engine. The particles are electrically charged and nonvolatile and they originate from the combustion process. Tailpipe particle control by open channel filter can remove more than 85% of the nonvolatile 10-nm particles and about 50% of the soot-mode particles, while the fuel injection pressure increase can lead to particle number increase. The study provides a new viewpoint for low-load particle emissions and control.     

Comparison of airborne and terrestrial gamma spectrometry measurements - evaluation of three areas in southern Sweden

The Geological Survey of Sweden (SGU) has been conducting airborne gamma spectrometry measurements of natural radioactivity in Sweden for more than 40 years. Today, the database covers about 80% of the country’s land surface. This article explores the first step of putting this data into use in radioactive source search at ground level. However, in order to be able to use the airborne background measurements at ground level, SGU data must be validated against terrestrial data. In this work, we compare the SGU data with data measured by a portable backpack system. This is done for three different areas in southern Sweden. The statistical analysis shows that a linear relationship and a positive correlation exist between the air and ground data. However, this linear relationship could be revealed only when the region possessed large enough variations in areal activity. Furthermore, the activity distributions measured show good agreement to those of SGU. We conclude that the SGU database could be used for terrestrial background assessment, given that a linear transfer function is established.     

Assessment of Biological and Environmental Phenology at a Landscape Level from 30 Years of Fixed-Date Repeat Photography in Northern Sweden

A 30-year series (1978–2007) of photographic records were analysed to determine changes in lake ice cover, local (low elevation) and montane (high elevation) snow cover and phenological stages of mountain birch (Betula pubescens ssp. czerepanovii) at the Abisko Scientific Research Station, Sweden. In most cases, the photographic-derived data showed no significant difference in phenophase score from manually observed field records from the same period, demonstrating the accuracy and potential of using weekly repeat photography as a quicker, cheaper and more adaptable tool to remotely study phenology in both biological and physical systems. Overall, increases in ambient temperatures coupled with decreases in winter ice and snow cover, and earlier occurrence of birch foliage, signal a reduction in the length of winter, a shift towards earlier springs and an increase in the length of available growing season in the Swedish sub-arctic.     

Multi-decadal changes in tundra environments and ecosystems: synthesis of the International Polar Year-Back to the Future project (IPY-BTF)

Understanding the responses of tundra systems to global change has global implications. Most tundra regions lack sustained environmental monitoring and one of the only ways to document multi-decadal change is to resample historic research sites. The International Polar Year (IPY) provided a unique opportunity for such research through the Back to the Future (BTF) project (IPY project #512). This article synthesizes the results from 13 papers within this Ambio Special Issue. Abiotic changes include glacial recession in the Altai Mountains, Russia; increased snow depth and hardness, permafrost warming, and increased growing season length in sub-arctic Sweden; drying of ponds in Greenland; increased nutrient availability in Alaskan tundra ponds, and warming at most locations studied. Biotic changes ranged from relatively minor plant community change at two sites in Greenland to moderate change in the Yukon, and to dramatic increases in shrub and tree density on Herschel Island, and in subarctic Sweden. The population of geese tripled at one site in northeast Greenland where biomass in non-grazed plots doubled. A model parameterized using results from a BTF study forecasts substantial declines in all snowbeds and increases in shrub tundra on Niwot Ridge, Colorado over the next century. In general, results support and provide improved capacities for validating experimental manipulation, remote sensing, and modeling studies.     

Exposure assessment at a PCDD/F contaminated site in Sweden—field measurements of exposure media and blood serum analysis

Background, aim, and scope  

The main pathway for human exposure to the highly toxic polychlorinated-p-dioxins and polychlorinated furans [polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs)] is via dietary intake. Other exposure pathways may, however, be important in close proximity to point sources, such as wood preservation sites, where PCDD/F contaminated chlorophenols (CP) were previously used. In this study, a heavily PCDD/F contaminated CP saw mill site in Sweden was investigated. Human exposure through a broad spectrum of exposure pathways was assessed. Such studies are in demand since the question whether contaminated sites represent a current or future risk can only be answered by detailed site-specific risk assessments.     

Estimates of black carbon and size-resolved particle number emission factors from residential wood burning based on ambient monitoring and model simulations

In this paper we derive typical emission factors for coarse particulate matter (PM(10)), oxides of nitrogen (NO(x)), black carbon (BC), and number particle size distributions based on a combination of measurements and air quality dispersion modeling. The advantage of this approach is that the emission factors represent integrated emissions from several vehicle types and different types of wood stoves. Normally it is very difficult to estimate the total emissions in cities on the basis of laboratory measurements on single vehicles or stoves because of the large variability in conditions. The measurements were made in Temuco, Chile, between April 18 and June 15, 2005 at two sites. The first one was located in a residential area relatively far from major roads. The second site was located in a busy street in downtown Temuco where wood consumption is low. The measurements support the assumption that the monitoring sites represent the impact of different emission sources, namely traffic and residential wood combustion (RWC). Fitting model results to the available measurements, emission factors were obtained for PM(10) (RWC = 2160 +/- 100 mg/kg; traffic = 610 +/- 51 mg/veh-km), NO(x) (RWC = 800 +/- 100 mg/kg; traffic = 4400 +/- 100 mg/veh-km), BC (RWC = 74 +/- 6 mg/kg; traffic = 60 +/- 3 mg/veh-km) and particle number (N) with size distribution between 25 and 600 nm (N(25-600)) (RWC = 8.9 +/- 1 x 10(14) pt/kg; traffic = 6.7 +/- 0.5 x 10(14) pt/veh-km). The obtained emission factors are comparable to results reported in the literature. The size distribution of the N emission factors for traffic was shown to be different than for RWC. The main difference is that although traffic emissions show a bimodal size distribution with a main mode below 30 nm and a secondary one around 100 nm, RWC emissions show the main mode slightly below 100 nm and a smaller nucleation mode below 50 nm.     

The Area Production Model: a tool and concept for sustainable land-use and forest-resource management

In developing countries, planning in the forestry sector has been seen as an appropriate instrument to prepare and implement government policies and programs. Despite its potential and recent advancements in, for example, remote sensing and infrastructure, tropical forest land-use planning is often formal and non-integrated with agriculture. It rarely involves all legitimate stakeholders and neglects taking into account actual land-use. The socio-economic and environmental consequences of these shortcomings emphasise the need for alternative ways of approaching planning. This article summarises the idea, structure and current status of the Area Production Model (APM), originally developed in the 1980s, which is now gaining interest as a land-use planning tool in Africa and Asia. It describes the development over time of production and consumption in agriculture and forestry within a defined geographical area operating under different assumptions on management, land use and socio-economic and macro-economic changes. From a narrow perspective, the APM is a fairly simple computerised tool for generating scenarios. In a broad sense, it is a concept comprising the whole planning process including organisation, inventory, data analysis, consensus building and strategy. A case-study in Laos, based on verified data for a historical period of 45 years, and a review of different APM applications in the world over the last 15 years are presented as a base for conclusions about its potential and shortcomings. In some cases where the APM concept was used in training courses and planning exercises involving stakeholders, it generated a strong interest in collecting and analysing relevant information. It provides the means of addressing a number of shortcomings in current planning.     

Change in spring arrival of migratory birds under an era of climate change,Swedish data from the last 140 years

Many migratory bird species have advanced their spring arrival during the latest decades, most probably due to climate change. However, studies on migratory phenology in the period before recent global warming are scarce. We have analyzed a historical dataset (1873–1917) of spring arrival to southern and central Sweden of 14 migratory bird species. In addition, we have used relative differences between historical and present-day observations (1984–2013) to evaluate the effect of latitude and migratory strategy on day of arrival over time. There was a larger change in spring phenology in short-distance migrants than in long-distance migrants. Interestingly, the results further suggest that climate change has affected the phenology of short-distance migrants more in southern than in central Sweden. The results suggest that the much earlier calculated arrival to southern Sweden among short-distance migrants mirrors a change in location of wintering areas, hence, connecting migration phenology and wintering range shifts.