渤海湾表层沉积物各形态重金属的分布特征与生态风险评价

根据2008年春对渤海湾的调查,通过分级萃取的实验方法以及总量和分形态风险评价的手段,重点研究了渤海湾表层沉积物各形态重金属的分布特征、影响因素和潜在生态风险.结果表明,重金属在渤海湾中央的泥质区富集,自然来源是控制V、Ni、Cu、Pb、Co和Cd分布的主要因素,而Zn和Cr较易受环境变化或人为输入等影响,其中Pb作为大气沉降和陆源输入都存在的重金属,其受控因素与其他重金属有一定差异.形态分析表明,V、Zn和Cr以残渣态为主,Co、Ni和Cu则是可浸取态占优势.其中Co的可浸取态质量分数在A断面先增加后降低,Ni的可浸取态质量分数在海河口附近A3站达最大值(98.86%),Cu和Pb的可浸取态高值区出现在A断面的中央区域,优势形态是铁锰氧化物结合态,Cu在湾口的A10站降到最小值(43.83%),在黄河口的D1站达最大值(73.89%).风险评价表明,重金属总量富集因子由大到小:Pb>Cd>Zn>Cr>V>Co>Cu>Ni,其中Pb、Cd和Zn的富集因子均大于1,但渤海湾沉积物总体质量良好,潜在生态风险较低.从形态角度评价,V和Cr基本无污染,Zn局部轻微污染,Co大部分轻度污染,Cu由无污染到中度污染,Ni由轻度污染到重度污染,Pb则属重度污染,其中Pb在渤海湾口A11站的P%(次生相与原生相分布比值)达1 329%.综合评价得出,Pb是渤海湾沉积物污染最严重的重金属,Cu和Zn有潜在污染,V、Cr和Co基本清洁.     

Higher CO2 absorption using a new class of calcium hydroxide (Ca(OH)2) nanoparticles

Environmental Chemistry Letters - With rising atmospheric carbon dioxide (CO2) concentrations globally, there is an urgent need for highly efficient CO2 capture technologies. This report introduces...     

Response of indigenous Cd-tolerant electrochemically active bacteria in MECs toward exotic Cr(VI) based on the sensing of fluorescence probes

Electrochemically active bacteria (EAB) on the cathodes of microbial electrolysis cells (MECs) can remove metals from the catholyte, but the response of these indigenous EAB toward exotic metals has not been examined, particularly from the perspective of the co-presence of Cd(II) and Cr(VI) in a wastewater. Four known indigenous Cd-tolerant EAB of Ochrobactrum sp X1, Pseudomonas sp X3, Pseudomonas delhiensis X5, and Ochrobactrum anthropi X7 removed more Cd(II) and less Cr(VI) in the simultaneous presence of Cd(II) and Cr(VI), compared to the controls with individual Cd(II) or single Cr(VI). Response of these EAB toward exotic Cr(VI) was related to the associated subcellular metal distribution based on the sensing of fluorescence probes. EAB cell membrane harbored more cadmium than chromium and cytoplasm located more chromium than cadmium, among which the imaging of intracelluler Cr(III) ions increased over time, contrary to the decreased trend for Cd(II) ions. Compared to the controls with single Cd(II), exotic Cr(VI) decreased the imaging of Cd(II) ions in the EAB at an initial 2 h and negligibly affected thereafter. However, Cd(II) diminished the imaging of Cr (III) ions in the EAB over time, compared to the controls with individual Cr(VI). Current accelerated the harboring of cadmium at an initial 2 h and directed the accumulation of chromium in EAB over time. This study provides a viable approach for simultaneously quantitatively imaging Cd(II) and Cr (III) ions in EAB and thus gives valuable insights into the response of indigenous Cd-tolerant EAB toward exotic Cr(VI) in MECs.

Open image in new window

     

严格管控类耕地非食用植物镉修复效果评价

综述了国内外在烟草,树木(杨树、柳树、桑树),纤维植物(苎麻、棉花)和蓖麻等非食用植物修复土壤镉方面的研究与应用进展,综合分析其修复能力与经济效益,得出蓖麻和苎麻的修复效果最佳.针对严格管控类耕地土壤镉修复,提出了开展非食用植物修复大田试验示范、研发环境友好型辅助措施、优化种植结构调整生态补偿机制,以及及时开展耕地土壤环境质量类别动态调整等建议.     

模式生物大型溞在水生生态毒理实验教学中的应用

大型溞(Daphnia magna)因其个体小、繁殖快、易于培养及对污染物敏感等特点,而成为水生毒理学研究中广泛应用的模式物种.本文构建了一套以大型溞为受试动物的水生生态毒理学实验内容和方案,可用于本科生基础性、综合性实验教学.本方案以形态学观察、生理学和毒理学测试为主,也可扩展为包括分子毒理学在内的其他毒性终点的创新性实验.此外,授课教师还可以本方案为基础,对实验内容酌情增减或联合使用,以满足不同层次学生的生态毒理学实验需求.     

Cd(Ⅱ)与As(Ⅴ)在土壤铁氧化物和细菌表面上的共吸附研究

中国南方土壤常常受到镉砷复合污染,镉砷的化学特性截然不同,因此在土壤不同组分表面的化学行为存在显著区别。在南方偏酸性土壤中铁氧化物占固相比例很大,基于此,选取两种典型土壤组分,即铁氧化物(针铁矿)和微生物(蜡状芽孢杆菌Bacillus cereus),通过批吸附实验结合X-射线光电子能谱探究Cd(Ⅱ)与As(Ⅴ)的共吸附特点和潜在机制,得到如下结果:在单一体系中,针铁矿对As(V)的亲和力较强,Langmuir模型拟合得到最大吸附量为1259.82 mmol·kg^-1,而蜡状芽孢杆菌对Cd(Ⅱ)的亲和力较强,最大吸附量可达1291.64 mmol·kg^-1。XPS结果表明,针铁矿表面铁羟基和细菌表面羧基和酰胺/胺基在Cd(Ⅱ)、As(Ⅴ)吸附过程中发挥主导作用;在Cd(Ⅱ)-As(Ⅴ)复合体系中,可能形成吸附剂-Cd-As或吸附剂-As-Cd三元络合物。该研究证实,镉砷在典型土壤铁氧矿物体系中的吸附存在普遍的促进效应,在微生物体系中存在不同程度的抑制,Cd(Ⅱ)与As(Ⅴ)的共吸附规律在土壤矿物和微生物上存在区别,这也意味着在土壤根际土壤与非根际土壤中有较大差异。因此在预测土壤Cd(Ⅱ)、As(Ⅴ)共存规律时也要考虑土壤组成,特别是有机物的含量等因素。该研究结果可为预测镉、砷在土壤组分上的迁移转化行为提供参考,为调控镉砷形态,对预测镉、砷在土壤中的生物地球化学循环有一定的参考价值。     

A Cu-modified active carbon fiber significantly promoted H2S and PH3 simultaneous removal at a low reaction temperature

• Cu_0.15-ACF performs the best for H₂S and PH₃ simultaneous removal. • 550°C and 90°C are separately calcination and reaction temperatures. • The reason why Cu_0.15/ACF shows better performance was found. • The accumulation of H₂PO₄⁻ and SO₄²⁻(H₂O)₆ is the deactivation cause of Cu_0.15/ACF. Poisonous gases, such as H₂S and PH₃, produced by industrial production harm humans and damage the environment. In this study, H₂S and PH₃ were simultaneously removed at low temperature by modified activated carbon fiber (ACF) catalysts. We have considered the active metal type, content, precursor, calcination, and reaction temperature. Experimental results exhibited that ACF could best perform by loading 15% Cu from nitrate. The optimized calcination temperature and reaction temperature separately were 550°C and 90°C. Under these conditions, the most removal capacity could reach 69.7 mg/g and 132.1 mg/g, respectively. Characterization results showed that moderate calcination temperature (550°C) is suitable for the formation of the copper element on the surface of ACF, lower or higher temperature will generate more cuprous oxide. Although both can exhibit catalytic activity, the role of the copper element is significantly greater. Due to the exceptional dispersibility of copper (oxide), the ACF can still maintain the advantages of larger specific surface area and pore volume after loading copper, which is the main reason for better performance of related catalysts. Finally, increasing the copper loading amount can significantly increase the crystallinity and particle size of copper (oxide) on the ACF, thereby improving its catalytic performance. In situ IR found that the reason for the deactivation of the catalyst should be the accumulation of generated H₂PO₄⁻ and SO₄²⁻(H₂O)₆ which could poison the catalyst.     

生态环境重大工程项目全过程管理体系评价与对策

生态环境重大工程是实施国家中长期规划、具有中国特色的一项制度安排。本研究通过梳理我国重大生态环境工程项目管理现状,包括制度建设、工程标准体系建设、绩效管理体系建设等,结合“十四五”生态环境保护形势和任务要求,分析当前我国在生态环境工程项目管理体系建设上存在的主要问题。在此基础上,构建出我国重大生态环境项目组织管理的框架和路线图,提出“十四五”加强和提升我国重大生态环境保护项目全过程管理的对策与建议。     

被动采样-UV法测定环境空气中的臭氧浓度

研究被动采样-UV法测定臭氧浓度.以NaNO2作为诱捕试剂,用被动采样器吸收O3,然后在紫外分光光度计上进行测定.通过测定所生成的NO-3浓度,间接计算出臭氧浓度.结果表明,测得臭氧浓度范围在20～100 μg/m3,NO-3浓度线性范围在0～0.6 mmol/L.在测定NO-3浓度时,NO-2会造成很大的干扰,但在实验中,NO-2浓度在0～0.8 mmol/L,氨基磺酸都能有效地去除其干扰.该方法是简单、灵敏、可靠的测定环境空气中臭氧浓度的良好方法.     

Fluoride removal from secondary effluent of the graphite industry using electrodialysis: Optimization with response surface methodology

RSM was utilized to optimize and model influential parameters on fluoride removal. Regression models involving independent variables and main response were developed. Interactive effects and optimum of process factors were illuminated and determined. Fluoride removal efficiency of 99.69% was observed in optimal process conditions. Response surface methodology was utilized to model and optimize the operational variables for defluoridation using an electrodialysis process as the treatment of secondary effluent of the graphite industry. Experiments were conducted using a Box-Behnken surface statistical design in order to evaluate the effects and the interaction of the influential variables including the operational voltage, initial fluoride concentration and flow rate. The regression models for defluoridation and energy consumption responses were statistically validated using analysis of variance (ANOVA); high coefficient of determination values (R² = 0.9772 and R² = 0.9814; respectively) were obtained. The quadratic model exhibited high reproducibility and a good fit of the experimental data. The optimum values of the initial fluoride concentration, voltage and flow rate were found to be 13.9 mg/L, 13.4 V, 102.5 L/h, respectively. A fluoride removal efficiency of 99.69% was observed under optimum conditions for the treatment of the secondary effluent of the graphite industry.