Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

The present study validates the oil-based paint bioremediation potential of Bacillus subtilis NAP1 for ecotoxicological assessment using a three-dimensional multi-species bio-testing model. The model included bioassays to determine phytotoxic effect, cytotoxic effect, and antimicrobial effect of oil-based paint. Additionally, the antioxidant activity of pre- and post-bioremediation samples was also detected to confirm its detoxification. Although, the pre-bioremediation samples of oil-based paint displayed significant toxicity against all the life forms. However, post-bioremediation, the cytotoxic effect against Artemia salina revealed substantial detoxification of oil-based paint with LD₅₀ of 121 μl ml^?1 (without glucose) and >?400 μl ml^?1 (with glucose). Similarly, the reduction in toxicity against Raphanus raphanistrum seeds germination (%FG?=?98 to 100%) was also evident of successful detoxification under experimental conditions. Moreover, the toxicity against test bacterial strains and fungal strains was completely removed after bioremediation. In addition, the post-bioremediation samples showed reduced antioxidant activities (% scavenging?=?23.5?±?0.35 and 28.9?±?2.7) without and with glucose, respectively. Convincingly, the present multi-species bio-testing model in addition to antioxidant studies could be suggested as a validation tool for bioremediation experiments, especially for middle and low-income countries.

?

     

Characterization of tannery effluent wastewater by proton-induced X-ray emission (PIXE) analysis to investigate their role in water pollution

Introduction  

Over the last few decades, the chromium-based tanning industry has shown rapid growth in Pakistan. However, the rules and regulations promulgated by the government are not strictly followed for processing the effluent discharge from the tanneries. Consequently, tannery effluents have become a great source of water pollution in surrounding areas.     

Monitoring trace elements generated by automobiles: air pollutants with possible health impacts

Major transformations in the environmental composition are principally attributable to the combustion of fuels by automobiles. Motorized gasoline-powered two-stroke auto-rickshaws (TSA) and compressed natural gas (CNG)-powered four-stroke auto-rickshaws (FSA) are potential source of air pollution in south Asia and produce toxic amount of particulate matter (PM) to the environment. In this study, we attempted to characterize elemental pollutants from the PM of TSA and FSA using proton-induced X-ray emission (PIXE) analysis. The observations of the existing investigation recognized significant increase in Al (P?<?0.05), P (P?<?0.01), and Zn (P?<?0.01) from the PM samples of FSA. In addition, the concentrations of Cu, Fe, K, Mg, Na and S were also observed exceeding the recommended National Institute for Environmental Studies limits. On the contrary, increased concentration of Sr and V were observed in the PM samples from TSA. It is generally believed that FSA generates smaller amount of PM but data obtained from FSA are clearly describing that emissions from FSA comprised potentially more toxic substances than TSA. The current research is specific to metropolitan population and has evidently revealed an inconsistent burden of exposure to air pollutants engendered by FSA in urban communities, which could lead to the disruption of several biological activities and may cause severe damage to entire ecological system.     

Environmental and socio-economic impacts of pipe drainage in Pakistan

Many drainage schemes and salinity control projects have been executed world wide. Pipe drainage has widely been used in Pakistan, Egypt and India to control waterlogging. The impact of pipe drainage on land and water was evaluated in this paper using data of three pipe drainage projects in Pakistan namely Khushab Salinity Control and Reclamation Project, Fourth Drainage Project in Faisalabad and Swabi Salinity Control and Reclamation Project. Data by regular monitoring of these projects were collected. The effect of pipe drainage on water table depth at these three locations has been compared. Water quality and soil salinity improvement due to the pipe drainage has also been investigated. Data, related to water table depths and discharges from drain pipes/wells, was collected. Observation wells, installed at various places by the Water and Power Development Authority, were used for collection of this data. To evaluate the impact of the projects on salinity, soil samples from all the three locations were tested. A questionnaire was prepared to get the view of the people about the projects. It was revealed that in these areas, due to subsurface pipe drainage, the percentage of the abandoned land has been considerably decreased. Over drainage was observed in a few places of the projects. The farmers at such places were asked to change their cropping patterns. Ultimately, there has been an increase in area under cultivation, crop yields and cropping intensity in the projects’ area.     

Robust bioinspired surfaces and their exploitation for petroleum hydrocarbon remediation

The current improvement in science and engineering, actively dealing with surfaces and interfaces, turns into a functioning control with a thriving advancement propensity. Superlyophobic/superlyophilic phenomena in surface sciences have pulled in broad considerations of researchers and specialists. Inspired by the natural and living organism, researchers have designed different biomimetic materials with exceptional surface wettability, such as the smart wetting of asymmetric spider silk surfaces. These smart materials with superlyophobic/superlyophilic wettability are generally utilized for water assortment, self-cleaning, fluid transportation and separation, and many researchers’ domains. Among them, emulsion separation, including division of oil-water blend, mixtures of immiscible liquids and oil-water emulsions, is highlighted by an increasing number of researchers. Numerous materials with one- and two-dimensional morphology, smart surfaces, and super wettability have been effectively designed and utilized in various scientific research applications. We expect that these bioinspired materials with super wettability can have promising applications in practical for emulsion destabilization and liquid transportation.

     

Controlled release formulations of metribuzin: Release kinetics in water and soil

Controlled release (CR) formulations of metribuzin in Polyvinyl chloride [(PVC) (emulsion)], carboxy methyl cellulose (CMC), and carboxy methyl cellulose-kaolinite composite (CMC-KAO), are reported. Kinetics of its release in water and soil was studied in comparison with the commercial formulation (75 DF). Metribuzin from the commercial formulation became non-detectable after 35 days whereas it attained maxima between 35–49 days and became non-detectable after 63 days in the developed products. Amongst the CR formulations, the release in both water and soil was the fastest in CMC and slowest in PVC. The CMC-KAO composite reduced the rate of release as compared to CMC alone. The diffusion exponent (n value) of metribuzin in water and soil ranged from 0.515 to 0.745 and 0.662 to 1.296, respectively in the various formulations. The release was diffusion controlled with half release time (t_1/2) from different controlled release matrices of 12.98 to 47.63 days in water and 16.90 to 51.79 days in soil. It was 3.25 and 4.66 days, respectively in the commercial formulation. The period of optimum availability of metribuzin in water and soil from controlled released formulations ranged from 15.09 to 31.68 and 17.99 to 34.72 days as against 5.03 and 8.80 days in the commercial formulation.     

Performance evaluation of 1-D numerical model HEC-RAS towards modeling sediment depositions and sediment flushing operations for the reservoirs

Sediment inflow to the reservoir is a key factor to calculate life of the reservoir. Flushing is a very useful technique in order to enhance the life of reservoir. From the literature review, 14 reservoirs were considered where flushing has already been practiced and only 6 reservoirs were found successful in flushing. The others were found partially flushed. In this research, data of three successfully flushed reservoirs namely Baira reservoir (India), Gebidem reservoir (Switzerland), and Gmund reservoir (Austria) were used to run 1-D numerical model HEC-RAS. In the first phase, the longitudinal profiles of delta were modeled and calibrated with observed sediment depositions. In the presence of available data of discharges and respective reservoir levels, the modeled deltas were used for flushing the deltas. With the help of modeled delta and corresponding flushing discharges, sediment deposition and flushing durations were computed. The simulated flushed durations were 31, 102, and 180 h for Baira, Gebidem, and Gmund reservoirs, respectively. The simulated flushed durations were found close to observed durations. Hence, the use of 1-D numerical model HEC-RAS is encouraged for modeling of sediment deposits and flushing operations.     

Factors associated with medical waste under pandemic situation: a case study of the Kingdom of Bahrain

Journal of Material Cycles and Waste Management - Exploring the factors influencing medical waste generation is vital for proper management due to its hazardous nature. Improper treatment would...