Particulate matter speciation profiles for light-duty gasoline vehicles in the United States

Representative profiles for particulate matter particles less than or equal to 2.5 µm (PM_2.5) are developed from the Kansas City Light-Duty Vehicle Emissions Study for use in the U.S. Environmental Protection Agency (EPA) vehicle emission model, the Motor Vehicle Emission Simulator (MOVES), and for inclusion in the EPA SPECIATE database for speciation profiles. The profiles are compatible with the inputs of current photochemical air quality models, including the Community Multiscale Air Quality Aerosol Module Version 6 (AE6). The composition of light-duty gasoline PM_2.5 emissions differs significantly between cold start and hot stabilized running emissions, and between older and newer vehicles, reflecting both impacts of aging/deterioration and changes in vehicle technology. Fleet-average PM_2.5 profiles are estimated for cold start and hot stabilized running emission processes. Fleet-average profiles are calculated to include emissions from deteriorated high-emitting vehicles that are expected to continue to contribute disproportionately to the fleet-wide PM_2.5 emissions into the future. The profiles are calculated using a weighted average of the PM_2.5 composition according to the contribution of PM_2.5 emissions from each class of vehicles in the on-road gasoline fleet in the Kansas City Metropolitan Statistical Area. The paper introduces methods to exclude insignificant measurements, correct for organic carbon positive artifact, and control for contamination from the testing infrastructure in developing speciation profiles. The uncertainty of the PM_2.5 species fraction in each profile is quantified using sampling survey analysis methods. The primary use of the profiles is to develop PM_2.5 emissions inventories for the United States, but the profiles may also be used in source apportionment, atmospheric modeling, and exposure assessment, and as a basis for light-duty gasoline emission profiles for countries with limited data.

Implications: PM_2.5 speciation profiles were developed from a large sample of light-duty gasoline vehicles tested in the Kansas City area. Separate PM_2.5 profiles represent cold start and hot stabilized running emission processes to distinguish important differences in chemical composition. Statistical analysis was used to construct profiles that represent PM_2.5 emissions from the U.S. vehicle fleet based on vehicles tested from the 2005 calendar year Kansas City metropolitan area. The profiles have been incorporated into the EPA MOVES emissions model, as well as the EPA SPECIATE database, to improve emission inventories and provide the PM_2.5 chemical characterization needed by CMAQv5.0 for atmospheric chemistry modeling.     

Prenatal diagnosis of inborn errors in peroxisomal β-oxidation

In recent years, an increasing number of inherited diseases in man have been recognized in which there is an impairment in the peroxisomal β-oxidation of very-long-chain fatty acids. In general, these disorders are associated with severe neurological and physical abnormalities and death within the first years of life. In this paper we describe our experience with regard to the prenatal diagnosis of a number of different inborn errors of peroxisomal β-oxidation. Eleven pregnancies at risk were monitored by measuring very-long-chain fatty acid levels as well as very-long-chain fatty acid β-oxidation in cultured chorionic villous fibroblasts and/or amniotic fluid cells. Five affected fetuses were identified. It is concluded that prenatal diagnosis in this group of diseases can be done reliably using cultured chorionic villous fibroblasts or amniotic fluid cells.     

Egyptian blue — Cuprorivaite a window to ancient Egyptian technology

Egyptian Blue, a multicomponent synthetic blue pigment has been recorded in ancient Egypt since the Fourth Dynasty of the Old Kingdom (2600–2480 B.C.). The pigment consisting of cuprorivaite (CaCuSi₄O₁₀) with variable amounts of wollastonite (CaSiO₃), Cu-rich glass and cuprite (Cu₃O) or tenorite (CuO) was prepared by melting the copper-rich ingredient with lime and desert sand. Low melting temperatures (below 742 °C) were achieved by addition of flux-like plant ashes. The high quality of the pigments collected from monuments of the Fifth Dynasty (2480–2320 B.C.) may indicate that the first manufacture was in early dynastic or perhaps predynastic eras. During the reign of Thutmosis III (18th Dynasty, 1490–1436 B.C.) probably bronze filings were first applied as starting material, thus indicating a technological innovation. This new method was employed till the Roman times.     

Vacuum energy in a Friedmann-Lemaître cosmos

The Science of Nature -     

Laboratory degradation studies of bentazone, dichlorprop, MCPA, and propiconazole in Norwegian soils

Laboratory degradation studies were performed in Norwegian soils using two commercial formulations (Tilt and Triagran-P) containing either propiconazole alone or a combination of bentazone, dichlorprop, and MCPA. These soils included a fine sandy loam from Hole and a loam from Kroer, both of which are representative of Norwegian agricultural soils. The third soil was a highly decomposed organic material from the Froland forest. A fourth soil from the Skuterud watershed was used only for propiconazole degradation. After 84 d, less than 0.1% of the initial MCPA concentration remained in all three selected soils. For dichlorprop, the same results were found for the fine sandy loam and the organic-rich soil, but in the loam, 26% of the initial concentration remained. After 84 d, less than 0.1% of the initial concentration of bentazone remained in the organic-rich soil, but in the loam and the fine sandy loam 52 and 69% remained, respectively. Propiconazole was shown to be different from the other pesticides by its persistence. Amounts of initial concentration remaining varied from 40, 70, and 82% in the reference soils after 84 d for the organic-rich soil, fine sandy loam, and loam, respectively. The organic-rich soil showed the highest capacity to decompose all four pesticides. The results from the agricultural soils and the Skuterud watershed showed that the persistence of propiconazole was high. Pesticide degradation was approximated to first-order kinetics. Slow rates of degradation, where more than 50% of the pesticide remained in the soil after the 84-d duration of the experiment, did not fit well with first-order kinetics.     

Waste reduction: Issues and policies

This paper reviews the major problems that confronted the Committee set up by the Solid Waste Management Board of the state of California to prepare a background report and recommend alternative methods for reducing solid waste generation. The results of their analysis are presented, together with discussion of the conclusions reached.