Development of a catalytic cracking process for converting waste plastics to petrochemicals

The catalytic degradation of polyolefin using H-gallosilicates was examined using a bench-scale reactor (0.8kg/h) with semicontinuous feeding and the following plastics: (1) low-density polyethylene (LDPE) pellets; (2) linear low-density polyethylene (L-LDPE) pellets; (3) high-density polyethylene (HDPE) pellets; (4) polypropylene (PP) pellets; (5) polyolefin obtained from pulverized industrial waste plastics. The yields of liquid compounds from these materials, which were aromatics in most cases, ranged from 55wt% to 68wt%. With an increase in the ratio of total reactant to catalyst, the liquid yield remained the same. Yields of benzene, toluene, and xylenes (BTXs) decreased rapidly to below 50wt% at a ratio of more than 30. Differences in this ratio for BTXs were always small and were independent of the material. Only about half of the gas product was propane with a fresh catalyst. When the experiments were repeated, propylene, isobutane, and isobutene were found to increase.     

Ignitability of aluminous coating powders due to electrostatic spark

Electrostatic Powder coating which is a surface finishing technique has widely been used in paint industry since its invention in the 1960s. However, so far, insufficient attention has been paid to the powder fires and/or explosion hazards caused by electrostatic spark during coating process. This paper is a report of the electrostatic spark ignitability of aluminous coating powders (dry blend-type) used in practical electrostatic powder coating. The Hartman vertical-tube apparatus was used for the minimum ignition energy (MIE) test. Various aluminous coating powders, different with respect to the amount of aluminum pigment, were used in this study. Experimental results obtained in this study are as follows: (1) The aluminous coating powder was so sensitive that even an electrostatic spark with an energy as low as 10 mJ could ignite it. (2) The particle size of aluminous coating powder has a considerable effect on the ignitability when the aluminum pigment concentration is within 6 wt% of the practical coating powder manufacturing standards. Thus, the conventional expression for estimating the MIE can be useful when assessing the electrostatic hazards associated with aluminum coating powders.     

Determination of an acceptable assimilable organic carbon (AOC) level for biological stability in water distribution systems with minimized chlorine residual

There is considerable interest in minimizing the chlorine residual in Japan because of increasing complaints about a chlorinous odor in drinking water. However, minimizing the chlorine residual causes the microbiological water quality to deteriorate, and stricter control of biodegradable organics in finished water is thus needed to maintain biological stability during water distribution. In this investigation, an acceptable level of assimilable organic carbon (AOC) for biologically stable water with minimized chlorine residual was determined based on the relationship between AOC, the chlorine residual, and bacterial regrowth. In order to prepare water samples containing lower AOC, the fractions of AOC and biodegradable organic matter (BOM) in tap water samples were reduced by converting into biomass after thermal hydrolysis of BOM at alkaline conditions. The batch-mode incubations at different conditions of AOC and chlorine residual were carried out at 20°C, and the presence or absence of bacterial regrowth was determined. The determined curve for biologically stable water indicated that the acceptable AOC was 10.9 μg C/L at a minimized chlorine residual (0.05 mg Cl₂/L). This result indicated that AOC removal during current water treatment processes in Japan should be significantly enhanced prior to minimization of the chlorine residual in water distribution.     

Development of plastic disks containing flame retardants for elucidating changes in their concentrations due to simulated weathering and the application of these disks to weathering tests

Flame retardants (FRs) are useful because they can prevent combustion and delay the spread of fire after the ignition on commercial products containing plastics. However, such commercial products could be a primary source of environmental contamination with FRs. Plastic disks containing FRs were prepared to elucidate changes in the concentrations of the FRs after weathering tests. Acrylonitrile-butadiene-styrene (ABS) and polycarbonate (PC) resin were separately kneaded with a combination of three organic FRs [Dechlorane plus (DP), tetrabromobisphenol A (TBBPA), and triphenyl phosphate (TPhP)] and one inorganic FR [antimony trioxide (Sb₂O₃)]. The concentrations of TBBPA/TPhP and DP/Sb₂O₃ in the final preparations were respectively 1000 and 500 mg/kg in compliance with the RoHS directive on organobromine FR. The concentrations of elements in the final preparations were 300 mg/kg for chlorine, 600 mg/kg for bromine, 100 mg/kg for phosphorus, and 400 mg/kg for antimony, respectively. The analytical concentrations (three FRs and four elements) were consistent with the expected concentrations (maximum difference ?9.5% in the PC disks). The FRs and elements in the disks were sufficiently homogenous (maximum inhomogeneity 4.3% in the PC disks). The prepared disks were subjected to weathering tests; the concentrations of TBBPA in the disks decreased significantly (30 to 40%) whereas the concentrations of the elements did not change under the condition of this study. On the other hand, there were no drastic differences on relationships of FRs and elements such as DP/chlorine and TPhP/phosphorus.     

Decomposition and removal of ionic liquid in aqueous solution by hydrothermal and photocatalytic treatment

We demonstrated a complete decomposition method for ionic liquids (ILs; organic cation part: butyl-methyl or ethyl-methyl imidazolium, and inorganic anion part: PF₆ ⁻, BF₄ ⁻ or Br⁻) in aqueous media by combining a hydrothermal mineralization method with a photocatalytic decomposition (PD) method. As a result, the hydrothermal treatment with Ca(OH)₂ mineralizer could effectively remove the inorganic anion part, such as PF₆ ⁻ or BF₄ ⁻ and the PD could decompose the organic cation part effectively. Therefore, the detoxification of ILs in aqueous media was accomplished by the present method.     

Polychlorinated biphenyls and -naphthalenes in pine needles and soil from Poland--concentrations and patterns in view of long-term environmental monitoring

Pine needles were selected as cost effective and easy collectable matrices suitable for long-term monitoring of the lower troposphere pollution with polychlorinated biphenyls and polychlorinated naphthalenes. The fingerprints of PCNs and PCBs in the top layers of agricultural soils were used for determination of point sources of pollution for terrestrial ecosystems. The new idea based on the use of nona- and decachlorinated isomers fingerprint as an additional tool suitable for the identification of potential point sources of pollution with PCBs, seemed to be a capable tool to identify contamination of soil and ambient air related to former manufacturing and the use of highly chlorinated technical PCB preparations.     

Health risk assessment for polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and dibenzofurans, and polychlorinated naphthalenes in seafood from Guangzhou and Zhoushan, China

This study determined the concentrations of organochlorine contaminants in common seafood in two Chinese coastal cities (Guangzhou and Zhoushan), and assessed the health risk due to the daily consumption of contaminated seafood. Twenty-six pooled samples, belonging to five food categories (fish, bivalves, shrimp, crab, and cephalopods), were purchased from local markets in Guangzhou and Zhoushan in 2003 and 2004. These samples were analyzed for total polychlorinated biphenyls (PCBs), non- and mono-ortho-PCBs (coplanar PCBs), polychlorinated naphthalenes (PCNs), and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDDs/DFs). The concentrations of total PCBs and coplanar PCBs in fish samples were higher in Guangzhou than in Zhoushan, while the levels of PCNs and PCDDs/DFs were comparable between the two cities. The total daily intake values of dioxin-like compounds were 1.05 and 0.86pg WHO-TEQ/kg body weight in Guangzhou and Zhoushan, respectively. Hazard ratios of non-cancer risk in the two cities were all less than unity.     

Evaluation of pressurized liquid extraction for the analysis of four pesticides in unpolished rice

The aim of to evaluate efficiency of this study was extraction pressurized liquid extraction (PLE) for the analysis of four pesticides, fthalide, etofenprox, fenitrothion, and isoprothiolane, in unpolished rice by comparing with homogenization as a reference technique. The concentrations of four selected pesticides obtained by PLE with acetonitrile at 130 degrees C for 10 min x 2 cycles were comparable to those by homogenization with water-soaking. The repeatability of the analysis, represented as relative standard deviations (RSDs), were 1.4-3.6% (n = 3) for PLE at 130 degrees C and 1.2-3.8% (n = 3) for homogenization with water-soaking. Recovery yields of surrogates were 75-88% and 87-109% for PLE at 130 degrees C and homogenization with water-soaking, respectively, and these were satisfactory according to the method of positive list. This study suggested that PLE can be applied for the analysis of selected four pesticides in unpolished rice as well as homogenization with water-soaking.     

Atmospheric monitoring of organochlorine pesticides across some West African countries

Most African countries have ratified the Stockholm Convention on persistent organic pollutants (POPs) and are expected to reduce emissions of POPs such as organochlorine pesticides (OCPs) to the atmosphere. Emerging evidence, however, suggests that there are contemporary sources of OCPs in African countries despite the global ban on these products. This study investigated the atmospheric contamination from OCPs in four West African countries—Togo, Benin, Nigeria, and Cameroon—to ascertain the emission levels of OCPs and the characteristic signatures of contamination. Polyurethane foam (PUF) disk passive air samplers (PAS) were deployed in each country for ca. 55 days in 2012 and analyzed for 25 OCPs. Hexachlorocyclohexanes (HCHs) and DDTs constituted the highest burden of atmospheric OCPs in the target countries, at average concentrations of 441 pg m^?3 (range 23–2718) and 403 pg m^?3 (range 91–1880), respectively. Mirex had the lowest concentration, ranged between 0.1 and 3.3 pg m^?3. The concentration of OCPs in rainy season was higher than in dry season in Cameroon, and presupposed inputs from agriculture during the rainy season. The concentrations of ∑25 OCPs in each country were in the following order: Cameroon > Nigeria > Benin > Togo. There was significant evidence, based on chemical signatures of the contamination that DDT, aldrin, chlordane, and endosulfan were recently applied at certain sites in the respective countries.     

Formation of estrogenic products from environmental phthalate esters under light exposure

Phthalate esters (PEs) have been suspected to be environmental endocrine disruptors and the detailed mechanism remains unclear. The activities of these chemicals can be enhanced through chemical modification under the environmental conditions. We demonstrate that PEs acquire unequivocal estrogenic activity by light exposure. Through UV exposure of an aqueous PE solution, one active photoproduct, identified as 4-hydroxyPE (PE-4OH) based on its characteristic UV and mass spectra, was detected in an estrogen receptor alpha-dependent transactivation assay. PE-4OH was effectively generated by UV 290 nm. The PE-4OH production accompanied H2O2 generation in a UV dose-dependent manner. Both PE and UV irradiation were indispensable in the generation of H2O2. Addition of H2O2 to the PE solution increased PE-4OH production under UV irradiation. The PE-4OH production was also observed in the PE reaction with the Fenton reagent generating hydroxyl radical without UV irradiation. The proposed mechanism for PE-4OH production based on these results is such that by PE-mediated photosensitization H2O2 is generated from O2 and H+ and decomposed to hydroxyl radical, thus oxidizing the PE benzene ring. The PEs-4OH are remarkably active estrogenic products of PEs and would be involved in ER-mediated endocrine disruption.