Identification of chemical substances in industrial wastes and their pyrolytic decomposition products

In order to quantify the sources of chemical pollutants in the leachate from reclaimed wastes, chemical substances in 11 different types of industrial wastes were identified. Their elution behaviors were also investigated. Alkanes (5.3-890 ng g(-1)), benzenes (8.1-110 ng g(-1)), polyaromatic hydrocarbons (PAHs) (3.2-560 ng g(-1)), alcohols, steroids, phenol (7.1 ng g(-1)), ketones, furans (190-210 ng g(-1)), phthalates (8.9-560 ng g(-1)), benzoquinones, dibenzothiophene (190 ng g(-1)), benthiocarb (4.2 ng g(-1)), sulfur, nitrile compounds, amino compounds, amido compounds, pyridines, quinolines (1.8-15 ng g(-1)), isoquinolines, carbazoles, acridines, chlordenes (1.5-1.6 ng g(-1)) and nonachlors (1.1-1.6 ng g(-1)) were detected in 9 types of industrial wastes. The chemical substances detected in waste at the highest concentrations were alkanes, PAHs and phthalates. Water supply sludge, dust and brick garbage contained many kinds of chemical substances. The elution behaviors of specific chemical substances, COD and nutrients varied by characteristic and production process of each waste. Over 100 different compounds were detected in pyrolysis products including carbohydrate, carotynoid, amino acids, proteins, humic acids, lignin and combustion products.     

Effect of additives on dechlorination of PVC by mechanochemical treatment

Polyvinyl chloride (–CH₂–CHCl–) _n (PVC) was ground with a powdered inorganic material (CaO, CaCO₃, SiO₂, Al₂O₃, or slag) in a planetary ball mill under atmospheric conditions to investigate the effect of additions on its dechlorination. The grinding causes a dehydrochlorinating reaction, forming a mixture of partially dechlorinated PVC and inorganic chloride, depending on the grinding time. The dechlorination increases as the grinding progresses, and is improved with increasing amounts of additives. The most effective additive is a mixture of CaO, SiO₂, and Al₂O₃, which has the same constituent components as blast furnace slag. CaO, a mixture of CaO, SiO₂, and blast furnace slag, are also effective, but CaCO₃ is the least effective additive tired. Received: August 3, 2000 / Accepted: September 21, 2000     

Filtration of Airborne Particulates by Gravel Filters: I. Initial Collection Efficiency of a Gravel Layer

An equation derived for initial collection of efficiency E₀ of a gravel bed filter predicts that — ln(1 — E₀) is proportional to the thickness of the gravel layer, to the — 5/3 power of the diameter of uniform gravels, and to the — 2/3 power of the Darcy airflow velocity. The experimental data obtained from NH₄CI fume removal from dry air at room temperature by sieved gravel fractions generally supported the equation, except that the effect of mean gravel size was represented by the —1.43 power of the average diameter.     

Fluxes of carbon dioxide, methane and nitrous oxide in two contrastive fringing zones of coastal lagoon, Lake Nakaumi, Japan

We measured fluxes of carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O) simultaneously in two typical fringing zones, sandy shore and salt marsh, of coastal lagoon, Lake Nakaumi, Japan, in mid-summer 2003. Our aim was to quantify net the greenhouse gases (GHGs) fluxes and examine key factors, which control variation of the GHGs fluxes in the two sites. Net CO(2) and CH(4) fluxes were markedly different between the two sites; magnitudes and variations of the both fluxes in sandy shore were lower than those of salt marsh. Meanwhile, magnitude and variation of net N(2)O flux in the two sites were similar. In sandy shore, temporal and spatial variation of the three GHGs fluxes were highly controlled by water level fluctuation derived from astronomic tide. In salt marsh, spatial variation of the three GHGs fluxes were correlated with aboveground biomass, and temporal variation of CO(2) and CH(4) fluxes were correlated with soil temperature. The sum of global warming potential, which was roughly estimated using the observed GHGs fluxes, was ca. 174-fold higher in salt marsh than in sandy shore.     

Mechanism and Characterization of Polyamide 4 Degradation by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp.

We identified a biodegrading microorganism of polyamide (nylon) 4, a linear polymer of γ-aminobutyric acid (GABA). From activated sludge, the biodegrading bacteria strains of Pseudomonas sp. were isolated and identified by their taxonomic characteristics and nucleotide sequences of 16S rDNA. One strain, ND-11, was grown on a minimal medium containing polyamide 4 (PA4) as the sole carbon source. The strain produced GABA as a degradation intermediate, as identified by analyzing the NMR spectra of degraded products. The culture supernatant of strain ND-11 degraded the emulsified PA4 completely within one day. These results suggest that the ND-11 strain degraded PA4 using its extracellular enzymes to hydrolyze amide bonds.     

The seasonal effects of manure management and feeding strategies on hydrogen sulphide emissions from stored dairy manure

Journal of Material Cycles and Waste Management - The influence of temperature and storage time on hydrogen sulphide (H2S) emissions from two different dairy manures was investigated over four...     

Gas chromatography�Cmass spectrometry for metabolite profiling of Japanese medaka (Oryzias latipes) juveniles exposed to malathion

Purpose

We evaluate malathion toxicity to Japanese medaka (Oryzias latipes) juveniles by using a mass spectrometry combined with gas chromatography (GC/MS) metabolomics approach.

Methods

Medaka were exposed to low (L) and high (H) concentrations (nominally 20 and 2,000 ??g/L, respectively) of water-borne malathion. Metabolites were extracted from the fish, derivatized, and analyzed by GC/MS. Identified metabolites were subjected to one-way analysis of variance and principal component analysis (PCA). We examined the variations in the amounts of the metabolites during the exposure period.

Results and discussion

At 24 h, control, L, and H groups were separated along PC1, suggesting that the effects of malathion depended on exposure concentration. The PCA results at 96 h suggest that the metabolite profiles variations of the L and H groups differed, and thus that the effects of malathion in groups differed. At 24 h, the amounts of amino acids in both exposed groups were lower than the control group amounts, perhaps owing to accelerated protein synthesis. At 96 h, the amounts of almost all the amino acids increased in the L group but decreased in the H group relative to the control group amounts, suggesting the proteolysis occurred in the L group while protein synthesis continued in the H group, that the high malathion exposure affected the fish. In addition, at 96 h, gluconeogenesis may have been induced in the L group but not in H group.

Conclusions

Malathion exposure may have altered the balance between protein synthesis and degradation and induced gluconeogenesis in medaka. Our results suggest that metabolomics will be useful for comprehensive evaluation of toxicity.     

Monitoring of PAHs and alkylated PAHs in aquatic organisms after 1 month from the Solar I oil spill off the coast of Guimaras Island, Philippines

Following the oil spill accident of the Solar I tanker in 2006 off the coast of Guimaras Island in the Philippines, polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs in some aquatic organisms were investigated at Luzaran in Guimaras and Taklong Islands, which were heavily polluted with spilled oil, immediately and 1 month after the accident. The concentrations of total PAHs were 11.9–52.3 ng/g dry weight in fish. Meanwhile, total PAH concentrations in shellfish were 38.0–3,102 ng/g dry weight in Luzaran and 128–236 ng/g dry weight in Taklong. Pyrene, phenanthrene, and fluoranthene were dominant in most fish and chrysene in all shellfish. Significantly higher concentrations of all alkylated homologs were detected in shellfish than in fish. These differences had two possible causes, that is, the differences between fish and shellfish could be attributed to the uptake routes and/or their metabolizing abilities.     

Coral skeletal tin and copper concentrations at Pohnpei, Micronesia: possible index for marine pollution by toxic anti-biofouling paints

We present 40 year-long skeletal chronologies of tin (Sn) and copper (Cu) from an annually-banded coral (Porites sp.) collected from Pohnpei Island, Micronesia (western equatorial Pacific). Both the elements are present in antifouling marine paints and are released inadvertently into ambient seawater. Especially, Sn has often been used in the form of tributyltin (TBT). Based on a stepwise pretreatment examination, Sn and Cu both inside and outside the aragonite lattice of the coral skeleton show a potential for providing marine pollution indicators. High values of extra-skeletal Cu/Ca and Sn/Ca atomic ratios were found between late 1960s and late 1980s during a period of active use of TBT-based antifouling paints worldwide. However, a significant decrease in both the ratios in the beginning of 1990s can be attributed to regulation of the use of TBT on cargo ships by countries such as the USA, Japan and Australia.     

Photodegradation of surfactants. XV: Formation of SO4 ions in the photooxidation of sulfur-containing surfactants

Three types of surfactants and related reference compounds containing sulfonate (-SO₃Na), sulfate (-OSO₃Na) or thioether carboxylate (-S-Cn-COOK) group were photodecomposed in an aqueous heterogeneous dispersion system. The photomineralization to SO₄²⁻ions was examined for the surfactants with different chemical structures. The photocatalytic activities of TiO₂ and ZnO were compared for the sulfonates of dodecylbenzene sulfonate (DBS) and polystyrene sulfonate (PSS), the sulfates of sodium dodecyl sulfate (SDS), and the potassium salts of S-dodecylthioglycol acid (TGA), S-dodecylthiopropionic acid (TPA) and S-dodecylthiomalic acid (TMA). ZnO catalyst exhibited higher activity in the formation of SO₄²⁻ion than TiO₂ catalyst.