Insecticide substitutes for DDT to control mosquitoes may be causes of several diseases

Malaria continues to be a public health problem in Bangladesh, despite efforts in the 1960s to eradicate the vectors through the use of DDT. At one point, eradication of malaria was acclaimed but later on it reappeared. The use of DDT is no more legally allowed in Bangladesh, which has been officially replaced by a number organophosphates and/or synthetic pyrethroids and their combinations in addition to the integrated vector management (IVM) package. IVM being a community approach is still to go a long way to be mass popular. Adulticides, larvicides, residual sprays, mosquito coil, insecticide-impregnated curtain, aerosol, etc. still serve as the major weapons of mosquito control. Thus, mosquito control still mostly depends on chemical insecticides. Although the use of DDT is banned in Bangladesh, there are reports on its illegal use in different forms. Moreover, there is tons of leftover DDT in Bangladesh, which is likely to cause several diseases. As per one report, about 500 MTs of DDT stockpiles are lying in the Medical Sub-Depots at Chittagong for over a period of 26 years. DDT is a persistent organic pollutant pesticide, which can cause diseases like cancer, endocrine disorder, disruption of immune system, embryonic abnormality, reproductive disorder, etc. Other chemical insecticides, which are replacing DDT, are also not free of hazardous impacts. IVM thus appears to be a wise approach requiring concerted efforts for the management of mosquito to control malaria. Such an IVM comprises use of Bacillus thuringiensis Berliner var. israelensis, methoprene, biocontrol agents, cleaning of breeding sites, pyrethroid-impregnated curtain, etc. Therefore, a wise effort should be adopted to completely stop the use of DDT, eliminate its stockpiles wherever they are in Bangladesh and to popularise the IVM, not the chemicals-based alternatives throughout the country.     

Effects of benzo(a)pyrene on blood components,tumor markers,and oxidative status in mice

This study was carried out to investigate the effect of long-term exposure to benzo(a)pyrene (B(a)P) in mice. Hemogram, tumor markers, oxidative status, and B(a)P residues in liver tissue were evaluated. Sixty albino Swiss mice were randomly distributed equally into three groups; the control was given 0.1?mL corn oil once a week for 8 weeks. The other two groups were given 20 and 40?mg B(a)P per kg body weight once a week orally for the same period. B(a)P-treated mice suffered from depression and ascites, and macrocytic normochromic anemia was recorded at the 16th and 30th week. There was marked leukocytosis with lymphocytosis at the early stage of the experiment, followed by leukopenia, lymphopenia, and neutropenia at the end of the experiment. Monocytes and arginase activity were elevated throughout the experiment. Alpha feto-protein was detected only in the experimental groups in the 30th week of the experiment. A marked increase in lipid peroxides associated with a decrease in reduced glutathione and glutathione-S-transferase (GST) activity was observed in liver homogenate of the B(a)P-exposed animals. Residues of B(a)P were detected in liver tissue with a concentration parallel to the B(a)P dose level. In conclusion, B(a)P caused abnormal changes in the hemogram, evidence of tumor formation through B(a)P-induced oxidative stress, and it was accumulated in the liver tissue of mice.     

Residues and dissipation of the pesticide emamectin benzoate under Egyptian field condition: a case study

A simple, rapid analytical procedure for the quantification of emamectin benzoate in tomato was developed using high performance liquid chromatography with fluorescence detector (HPLC-FLD). Emamectin benzoate residues were extracted from tomato samples with n-hexane:ethyl acetate (1:1, v/v). The method involved derivatization using trifluoroacetic anhydride and 1-methylimidazole, prior to analysis by HPLC-FLD. Limit of quantification of this method was found to be 0.01 mg/kg, while limit of detection was 0.005 mg/kg. The dissipation of emamectin benzoate on tomato was studied, and half-life (t_1/2) was estimated in a field study carried out at three different locations. Emamectin benzoate was sprayed on tomato at recommended dosage. Samples of tomato were collected at 0, 1, 3, 7, 10, and 15 days after treatment. The t_1/2 of emamectin benzoate when applied at the recommended doses in tomato was approximately 2.5 days. The residue of emamectin benzoate reached below the maximal residue limit (MRL) 10 days after spraying at the tested dosage. Hence, a safe pre-harvest interval of 10 days is suggested before harvesting of tomato. This study would also be helpful for the Egypt government to establish the MRL of emamectin benzoate in tomatoes and provide guidance on the proper and safe use of this insecticide.     

Elements of fishing community resilience to climate change in the coastal zone of Bangladesh

Resilience has been conceptualized in various ways by anthropologists, ecologists, systems scientists and engineers; the boundaries of resilience are subjective and context dependent. Consequently, choosing the standards and metrics for assessing resilience remains key challenges for policy makers. In this study, using multicriteria evaluation of 40 basic criteria of human, physical, financial, natural and social assets, we have identified several elements, such as experienced fishermen, natural abundance of hilsa (Tenualosa ilisha), ability to assert decision on fish selling, nets and boats ownership, social harmony and capacity of buying food as essential livelihood assets for the fishermen at Hatiya Island, Bangladesh. These assets may enhance the relative resilience of the fishing community of the island to climate change by as much as 20–40%. The results of this study will improve our understanding of the elements that lead to resilience at the community level.     

Physico‐mechanical and Flammability Properties of Cyrtostachys renda Fibers Reinforced Phenolic Resin Bio-composites

Journal of Polymers and the Environment - The aim of this study is to investigate the effect of fiber length and loading on physico-mechanical and flammability properties of Cyrtostachys renda (CR)...     

Hybrid sensor for metal grade measurement of a falling stream of solid waste particles

A hybrid sensor system for accurate detection of the metal grade of a stream of falling solid waste particles is investigated and experimentally verified. The system holds an infrared and an electromagnetic unit around a central tube and counts all the particles and only the metal particles, respectively. The count ratio together with the measured average particle mass ratio (k) of non-metal and metal particles is sufficient for calculation of grade. The performance of the system is accurately verified using synthetic mixtures of sand and metal particles. Towards an application a case study is performed using municipal solid waste incineration bottom ash in size fractions 1-6mm, which presents a major challenge for nonferrous metal recovery. The particle count ratio was inherently accurate for particle feed rates up to 13 per second. The average value and spread of k for bottom ash was determined as 0.49 ± 0.07 and used to calculate grade within 2.4% from the manually analysed grade. At higher feed rates the sensors start missing particles which fall simultaneously through the central tube, but the hybrid system still counted highly repeatable. This allowed for implementation of a count correction ratio to eliminate the stationary error. In combination with averaging in measurement intervals for suppression of stochastic variations the hybrid system regained its accuracy for particle feed rates up to 143 per second. This performance and its special design, intended to render it insensitive to external interference and noise when applied in an eddy current separator, make the hybrid sensor suitable for applications such as quality control and sensor controlled separation.     

利用水浮莲净化麻黄素厂污水的中试研究

将麻黄素厂污水稀释5倍在100m2池面的水浮莲净化塘内进行了净化处理.在滞留处理时间为9d的条件下,SS、BOD₅、COD_Cr、NH₄^-N与色度的去除率分别保持在80.94%,89.43％,76.28％,88.51％,84.64%以上,净化水的理化指标达到了二级排放标准.细菌总数与大肠杆菌群数的剩余率也仅为净化前的0.238％和0.129％.蚕豆根尖微核检测结果表明致突变污染指数PI由净化处理前的6.02(6.44降到2.95以下.     

Geo-based model of intrinsic resilience to climate change: an approach to nature-based solution

A substantial amount of researches have been done on the understanding and assessment of resilience from multiple perspectives, e.g., ecological, social, economic, and disaster management; however, recent international approach is trending toward more systematic and comprehensive risk assessment processes. Pivotal element of such approach is to emphasizing on promoting resilience in the face of climate change impacts. Conceptualization and identification of parameters to assess climate change resilience is one of the remaining challenges that academia is facing. Reviewing the principles of the climate change resilience highlighted in the literature, the goal of this study is to introduce a theoretical model about the climate change resilience concept to facilitate and enhance future climate change resilience-related researches. The model proposed in this study is named as the climate change resilience of place (C-CROP) model, a geo-based model which is designed to assess climate change resilience for any geographic region with an approach to the incorporation of nature-based solution (NBS). C-CROP model considers vulnerability, exposure, sensitivity to climate change on one side; another side is co-benefit, climate proofing, and disservices of proposed NBS. An operational framework of the C-CROP model is also proposed, that allows spatially explicit assessment of climate change resilience in real world by developing an indicator-based framework and comprehensive mapping using the geospatial approach. Therefore, this model includes vulnerability hotspots identification; better understanding of the pathways of resilience; and solutions (i.e., NBS) to infer the impacts and effectiveness of resilience-building interventions.

     

Dissipation of the herbicide clopyralid in an allophanic soil: laboratory and field studies

Soil dissipation of the herbicide clopyralid (3,6-dichloropicolinic acid) was measured in laboratory incubations and in field plots under different management regimes. In laboratory studies, soil was spiked with commercial grade liquid formulation of clopyralid (Versatill, 300 g a.i. L(-1) soluble concentrate) @ 0.8 microg a.i. g(-1) dry soil and the soil water content was maintained at 60% of water holding capacity of the soil. Treatments included incubation at 10 degrees C, 20 degrees C, 30 degrees C, day/night cycles (25/15 degrees C) and sterilized soil (20 degrees C). Furthermore, a field study was conducted at the Waikato Research Orchard near Hamilton, New Zealand starting in November 2000 to measure dissipation rates of clopyralid under differing agricultural situations. The management regimes were: permanent pasture, permanent pasture shielded from direct sunlight, bare ground, and bare ground shielded from direct sunlight. Clopyralid was sprayed in dilute solution @ 600 g a.i. ha(-1) on to field plots. Herbicide residue concentrations in soil samples taken at regular intervals after application were determined by gas chromatograph with electron capture detector. The laboratory experiments showed that dissipation rate of clopyralid was markedly faster in non-sterilized soil (20 degrees C), with a half-life (t1/2) of 7.3 d, than in sterilized soil (20 degrees C) with t1/2 of 57.8 d, demonstrating the importance of micro-organisms in the breakdown process. Higher temperatures led to more rapid dissipation of clopyralid (t1/2, 4.1 d at 30 degrees C vs 46.2 d at 10 degrees C). Dissipation was also faster in the day/night (25/15 degrees C) treatment (t1/2, 5.4 d), which could be partly due to activation of soil microbes by temperature fluctuations. In the field experiment, decomposition of clopyralid was much slower in the shaded plots under pasture (t1/2, 71.5 d) and bare ground (t1/2, 23.9 d) than in the unshaded pasture (t1/2, 5.0 d) and bare ground plots (t1/2, 12.9 d). These studies suggest that environmental factors such as temperature, soil water content, shading, and different management practices would have considerable influence on rate of clopyralid dissipation.