Inherent risk assessment—A new concept to evaluate risk in preliminary design stage

Quantitative Risk Assessment (QRA) has been a very popular and useful methodology which is widely accepted by the industry over the past few decades. QRA is typically carried out at a stage where complete plant has been designed and sited. At that time, the opportunity to include inherent safety design features is limited and may incur higher cost. This paper proposes a new concept to evaluate risk inherent to a process owing to the chemical it uses and the process conditions. The risk assessment tool is integrated with process design simulator (HYSYS) to provide necessary process data as early as the initial design stages, where modifications based on inherent safety principles can still be incorporated to enhance the process safety of the plant. The risk assessment tool consists of two components which calculate the probability and the consequences relating to possible risk due to major accidents. A case study on the potential explosion due to the release of flammable material demonstrates that the tool is capable to identify potential high risk of process streams. Further improvement of the process design is possible by applying inherent safety principles to make the process under consideration inherently safer. Since this tool is fully integrated with HYSYS, re-evaluation of the inherent risk takes very little time and effort. The new tool addresses the lack of systematic methodology and technology, which is one of the barriers to designing inherently safer plants.     

The relative importance of factors influencing the adoption of sustainable agricultural practices: a factor approach for Malaysian vegetable farmers

This study develops the understanding of the adoption of sustainable agricultural practices (SAPs) by investigating the relative importance of a set of multidimensional factors in the Malaysian vegetable production sector. A factor approach is deployed to identify explanatory indicators within an integrative framework that is synthesized from the theory of interpersonal behavior and the theory of diffusion of innovation. We achieved this by analyzing a logistic regression model for the adoption of six individual SAPs (conservation tillage, intercropping, cover crops/mulches, crop rotation, organic fertilizers/composts, and integrated pest management). The findings indicate that adoption depends on a range of socio-economic, agro-ecological, institutional, informational, and psychological factors, as well as the perceived attributes of SAPs. Fundamental policy understanding of the issue should, therefore, be multidisciplinary. In addition, standardized coefficients reveal that the impact of statistically significant factors on adoption is unequal. In general, the most influential factor is the asymmetric distribution of resources across geographical locations. This is followed by financial capital and a number of factors, including the workforce size, the usefulness of information, Chinese ethnicity, and the perceived relative advantage of SAPs. Guided by this prioritization understanding, future SAPs promotion now has a better opportunity to target the more important areas. Similar research effort should be made to steer sustainable agriculture internationally.     

Enhancing Performance of Sphingobacterium spiritivorum in Bioremediation Phenanthrene Contaminated Sand

Many biodegradation studies have focused on survival of isolated bacteria to increase the bacteria population and subsequently enhance the efficiency of polycyclic aromatic hydrocarbon (PAH) biodegradation. However, there is limited research on enhancing the performance of isolated bacteria through reinoculation. Thus, this study was designed to evaluate the effects of reinoculation on the performance of Sphingobacterium spiritivorum in degradation of phenanthrene contaminated sand. Experiments were performed in three different reactors. Inoculation was performed once (day 0) in reactor 1. In reactor 2, inoculation was performed twice (day 0 and day 5). The bacteria was isolated from reactor 2 and inoculated into reactor 3. The study results show reactor 3 having the highest degradation rate (13.61 mg/kg/day) and percentage removal (95.36 percent). In contrast, without reinoculation in reactor 1, 68.93 percent of phenanthrene was removed. Thus, the performance of S. spiritivorum in phenanthrene degradation can be enhanced through reinoculation. © 2014 Wiley Periodicals, Inc.     

Pesticide risk assessment: A study on inhalation and dermal exposure to 2,4-D and paraquat among Malaysian paddy farmers

A cross-section analytical study was conducted to evaluate the risk of pesticide exposure to those applying the Class II pesticides 2,4-D and paraquat in the paddy-growing areas of Kerian, Perak, Malaysia. It investigated the influence of weather on exposure as well as documented health problems commonly related to pesticide exposure. Potential inhalation and dermal exposure for 140 paddy farmers (handlers of pesticides) were assessed. Results showed that while temperature and humidity affected exposure, windspeed had the strongest impact on pesticide exposure via inhalation. However, the degree of exposure to both herbicides via inhalation was below the permissible exposure limits set by United States National Institute of Occupational Safety and Health (NIOSH). Dermal Exposure Assessment Method (DREAM) readings showed that dermal exposure with manual spraying ranged from moderate to high. With motorized sprayers, however, the level of dermal exposure ranged from low to moderate. Dermal exposure was significantly negatively correlated with the usage of protective clothing. Various types of deleterious health effects were detected among users of manual knapsack sprayers. Long-term spraying activities were positively correlated with increasing levels of the gamma-glutamyl transpeptidase (GGT) liver enzyme. The type of spraying equipment, usage of proper protective clothing and adherence to correct spraying practices were found to be the most important factors influencing the degree of pesticide exposure among those applying pesticides.     

Monitoring and identification of airborne asbestos in unorganized sectors, India

Rajasthan state in India is credited to cater more than 90% of total production of asbestos in this country, of which around 60% is processed there in unorganized sectors including milling and manufacturing of asbestos-based products. Unorganized asbestos units particularly mills showed unhealthy occupational conditions, therefore industrial hygiene study was carried out focusing on the prevalence of asbestos fibres in air at work zone area of asbestos milling units. Fibre levels were in the range of 2.00-5.09f/cm(3) and 4.07-15.60f/cm(3) in unorganized asbestos mills of Rajasthan located at Beawer and Deogarh districts, respectively. Like asbestos concentration, fibre type and length are also vital factors in the health risk assessment of industrial workers. Phase contrast and polarized light microscopic study of asbestos fibres showed their amphibole nature registering about 90% as tremolite and rest as anthophyllite. Fibre length measured micrometrically were sub-grouped in <10microm, 11-20microm, 21-30microm and >30microm. About 30-40% fibres belonged to sub-group <10microm. It is concluded that unorganized asbestos mills bear poor industrial unhygienic conditions reflected specifically from their manyfold higher fibre concentrations than the Indian and International standards. Poor industrial unhygienic conditions are attributable to obsolete milling technology, lack of pollution control devices and escape from regulatory control.     

Source Apportionment of Particulate Matter (PM10) and Indoor Dust in a University Building

A study on source apportionment of indoor dust and particulate matter (PM₁₀) composition was conducted in a university building by using chemometrics. The objective of this study was to investigate the potential sources of selected heavy metals and ionic species in PM₁₀ and indoor dust. PM₁₀ samples were collected using a low-volume sampler (LVS) and indoor dust was collected using a soft brush. Inductively coupled plasma spectrometry (ICP-MS) was used to determine the concentration of heavy metals, while the concentration of cations and anions was determined by atomic absorption spectrometer (AAS) and ion chromatography (IC), respectively. The concentration of PM₁₀ recorded in the building throughout the sampling period ranged from 20 ± 10 μgm^?3 to 80 ± 33 μgm^?3. The composition of heavy metals in PM₁₀ and indoor dust were dominated by zinc (Zn), followed by lead (Pb), copper (Cu), and cadmium (Cd). Principle component analysis (PCA) and multiple linear regression (MLR) showed that the main sources of pollutants in PM₁₀ came from indoor renovations (73.83%), vehicle emissions (16.38%), earth crust sources (9.68%), and other outdoor sources (0.11%). For indoor dust, the pollutant source was mainly earth crust. This study suggests that chemometrics can be used for forensic investigation to determine the possible sources of indoor contaminants within a public building.     

Examining the effectiveness of low-carbon strategies in South Asian countries: the case of energy efficiency and renewable energy

Environment, Development and Sustainability - This paper examines the impact of energy efficiency (EE) and renewable energy (RE) on carbon emissions, using a panel data of South Asian countries...     

Dry reforming of methane over oil palm shell activated carbon and ZSM-5 supported cobalt catalysts

In this study, cobalt supported oil palm shell activated carbon (Co/OPS-AC) and ZSM-5 zeolite (Co/ZSM-5) catalysts have been prepared for dry reforming of methane. Cobalt ratios of 6.0 and 14.0 wt% were deposited via wet impregnation method to the OPS-AC and ZSM-5 catalysts. The catalysts were characterized by XRD, N₂ adsorption--desorption isotherms, BET surface area, SEM, FESEM-EDX, TPR-H₂, and TPD-NH₃. The dry reforming of methane was performed using a micro reactor system under the condition of 10,000 ml/h.g-cat, 3 atm, CH₄/CO₂ ratio of 1.2:1.0 and temperature range from 923 K to 1023 K. The gaseous products were analyzed by gas chromatography (GC) with thermal conductivity detector (TCD) and further quantified to determine the conversions of CH₄ and CO₂, and the yields of CO and H₂. Experimental results revealed both catalysts exhibited lower conversions of CO₂ and CH₄ with the increase in temperature from 923 K to 1023 K. The reduced conversions may be due to the formation of carboneous substance on the catalyst known as coking. Comparatively, Co/OPS-AC gave higher conversions of CO₂ and CH₄ as well as higher yields of H₂ and CO as it has a higher surface area than Co/ZSM-5 which subsequently rendered higher activity for the reforming of methane. With the increasing cobalt loadings and reaction temperature, OPS-AC(14) catalyst exhibited improved activity and H₂/CO ratio. Based on these results, cobalt supported OPS activated carbon catalyst was suggested to be more effective for CO₂ and CH₄ conversions.     

Evaluating multispecies landscape connectivity in a threatened tropical mammal community

Habitat corridors are important tools for maintaining connectivity in increasingly fragmented landscapes, but generally they have been considered in single‐species approaches. Corridors intended to facilitate the movement of multiple species could increase persistence of entire communities, but at the likely cost of being less efficient for any given species than a corridor intended specifically for that species. There have been few tests of the trade‐offs between single‐ and multispecies corridor approaches. We assessed single‐species and multispecies habitat corridors for 5 threatened mammal species in tropical forests of Borneo. We generated maps of the cost of movement across the landscape for each species based on the species’ local abundance as estimated through hierarchical modeling of camera‐trap data with biophysical and anthropogenic covariates. Elevation influenced local abundance of banded civets (Hemigalus derbyanus) and sun bears (Helarctos malayanus). Increased road density was associated with lower local abundance of Sunda clouded leopards (Neofelis diardi) and higher local abundance of sambar deer (Rusa unicolor). Pig‐tailed macaque (Macaca nemestrina) local abundance was lower in recently logged areas. An all‐species‐combined connectivity scenario with least‐cost paths and 1 km buffers generated total movement costs that were 27% and 23% higher for banded civets and clouded leopards, respectively, than the connectivity scenarios for those species individually. A carnivore multispecies connectivity scenario, however, increased movement cost by 2% for banded civets and clouded leopards. Likewise, an herbivore multispecies scenario provided more effective connectivity than the all‐species‐combined scenario for sambar and macaques. We suggest that multispecies habitat connectivity plans be tailored to groups of ecologically similar, disturbance‐sensitive species to maximize their effectiveness. Evaluación de la Conectividad de Terrenos Multiespecie en una Comunidad Tropical de Mamíferos