Determination of Henry's law constant for elemental mercury

The assessment of the global mercury cycle involves estimations of the evasion of mercury form oceanic waters. In such estimations Henry's law constant is often used. In this study the Henry's law constant for elemental mercury has been re-determined in MQ water and artificial sea water. Moreover, for the first time it has been determined for 1.5M sodium chloride (NaCl) solution which is of relevance for modeling of atmospheric waters at coastal locations. For all solutions, experiments has been conducted at five different temperatures between 278 and 308K, using a novel technique, for mercury, based on direct measurements of the portioning of mercury between the aqueous and gaseous phase. Elemental mercury was extracted from the water column and the logarithm of the mass of extracted mercury was plotted against time. A dimensionless Henry's law constant, defined as: [Formula: see text] was obtained from the slope of the curve. Almost no difference was observed in the values comparing the Milli-Q water and artificial sea water, however for the 1.5M NaCl solution a salting-out effect was seen, i.e. the solubility of mercury in the water phase decreased. The decreased solubility will generate an increase in the value of Henry's law constant.     

Application of the WAMED model to landfilling

A cost methodology is proposed for evaluating the ecological-economic efficiency of a municipal solid waste management scheme based on the recommendations of cost-benefit analysis and the full-cost accounting methodology for municipal solid waste management. The methodology employs the previously introduced waste managements’ efficient decision (WAMED) model and the company statistical business tool for environmental recovery (COSTBUSTER) indicator. A case study presents the practical application of the proposed cost-benefit analysis-based theory to the landfilling concept currently applied in Kalmar, Sweden. It is concluded that the presented provisions for evaluation of the ecological-economic efficiency of a municipal solid waste management scheme reflect a novel integrated approach to solving the problem of simultaneously decreasing the negative impacts of municipal solid waste on the environment and the health of the population while providing an information support tool for decision making in municipal solid waste management at regional and municipal levels to improve small-and medium-sized company competitiveness in particular.     

Environmental regulatory failure and metal contamination at the Giap Lai pyrite mine, Northern Vietnam

The causes for the failure in enforcement of environmental regulations at the Giap Lai pyrite mine in northern Vietnam are considered and the environmental impacts that are associated with this mine are evaluated. It is shown that sulphide-rich tailings and waste rock in the mining area represent significant sources of acid rock drainage (ARD). The ARD is causing elevated metal levels in downstream water bodies, which in turn, represent a threat to both human health and to aquatic ecosystems. Metal concentrations in impacted surface waters have increased after mine closure, suggesting that impacts are becoming progressively more serious. No post-closure, remediation measures have been applied at the mine, in spite of the existence of environmental legislation and both central and regional institutions charged with environmental supervision and control. The research presented here provides further emphasis for the recommendation that, while government institutions may need to be strengthened, and environmental regulations need to be in place, true on the ground improvement in environmental quality in Vietnam and in many other developing countries require an increased focus on promoting public awareness of industrial environmental issues.     

Characterization of alkylphenol metabolites in fish bile by enzymatic treatment and HPLC-fluorescence analysis

Alkylphenol (AP) metabolites were characterized in the bile of Atlantic cod (Gadus morhua L.) after exposure to nine individual compounds (10mg/kg fish), 2-methylphenol (2-MP), 4-methylphenol (4-MP), 3,5-dimethylphenol (3,5-DMP), 2,4,6-trimethylphenol (2,4,6-TMP), 4-tert-butylphenol (4-t-BP), 4-tert-butyl-2-methylphenol (4-t-B-2-MP), 4-n-pentylphenol (4-n-PP), 4-n-hexylphenol (4-n-HexP) and 4-n-heptylphenol (4-n-HepP), and a mixture (total dose; 13.5 mg/kg fish) of the nine APs by inter-muscular injection. The degree of alkylation ranged from methyl (C1) to heptyl (C7) and represents the types of APs present in produced water. Fish bile was collected on day 4 and 16 (exposure groups 2-MP, 3,5-DMP, 2,4,6-TMP and 4-t-B-2-MP) following exposure. Characterization of major metabolites was accomplished by enzymatic de-conjugation and analysis by high performance liquid chromatography connected to a fluorescence detector (HPLC-F) acquiring at ex/em 222/306 nm. Two solid phase extraction (SPE) columns were evaluated for clean-up of samples prior to analysis. Independent of alkyl homologue, the glucuronide conjugated APs were the most abundant metabolites (73-100%), whereas sulfates, glucosides and unchanged compounds were excreted in amounts of 0-21%, 0-6.1% and 0-6.3%, respectively. The total concentration of measured metabolites in the bile, determined as their respective APs after de-conjugation, increased with increasing degree of alkylation (3.2+/-2.6 microg/g bile for 2-MP and 571+/-81 microg/g bile for 4-n-HepP) after exposure to an equal dose of AP. Comparison of metabolite concentrations in bile sampled 4 and 16 days after exposure, showed that the levels of 2-MP, 2,4,6-TMP and 4-t-B-2-MP were reduced by 55%, 30% and 45%, respectively whereas 3,5-DMP increased by 25% (not significant). This study suggests that analysis of de-conjugated metabolites in fish bile can be used to monitor AP exposure to fish, due to the relatively high and persistent level of these compounds. However, although HPLC-F is suitable for laboratory exposures, it might not be sufficient selective for field studies.     

Management of mountain areas in Norway and the persistence of local–national conflicts

We have investigated why conflicts linked to the distribution of power between governments and actors at the national and local levels concerning environmental management of mountain areas in Norway persist despite political intentions to strengthen local powers. We seek to explain this by analysing changes in policies, institutional frameworks, and regional contexts, and the local perceptions of these changes. Paradoxically, the national government's power has apparently been strengthened by new sectoral regulations and more stringent enforcement of the existing ones, increases in the number and extent of protected areas, and failures to act on intentions to devolve power. An additional factor spurring conflicts is the increased importance of tourism to mountain communities. To become more relevant to policies and development in mountain areas, future studies on multilevel governance must address multilevel politics, entire mountain areas, and the context of their development, rather than focusing on minor projects and protected areas.     

Driver Celeration Behavior and the Prediction of Traffic Accidents

A study was undertaken to investigate whether driver celeration (overall mean speed change) behavior can predict traffic accident involvement. Also, to test whether acceleration, deceleration or the combined celeration measure was the better predictor. Bus driver celeration behavior was measured repeatedly in real traffic, driving en route, and correlated with accidents for which the drivers were deemed at least partly responsible. Correlations around .20 were found in several samples between celeration behavior and culpable accidents for a 2-year period. The results show that although celeration behavior is only semi-stable over time, it predicts with some accuracy individual accident involvement over 2 years. The predictive power of acceleration and deceleration was slightly lower than the combined measure, in accordance with theory. The correlations found were strong enough to warrant the use of celeration behavior as a predictive variable for transportation companies in their safety work.     

The Effect of an Ergonomic Intervention on Musculoskeletal,Psychosocial and Visual Strain of VDT Entry Work: Organization and Methodology of the International Study

This special issue of the International Journal of Occupational Safety and Ergonomics (JOSE) reports the results from an extensive multinational and multidisciplinary collaborative investigation of the impacts on visual display terminal (VDT) work of musculoskeletal, visual, ergonomic, and psychosocial factors. For brevity, this effort has been referred to as the MEPS project (musculoskeletal—eyestrain—psychosocial—stress). This paper lays out the basic methodological structure of the study. The study was conducted in 4 countries utilizing VDT data entry workers as the primary subject population. A battery of objective and subject assessment measures, including muscle load, visual function, physical and visual strain, postural, ergonomic and psychosocial factors, were assessed at 3 different points in time. A pre-test was given prior to an ergonomic intervention. Two post-tests were given 1 month and 1 year after the ergonomic intervention.     

Size-related bioaccumulation and between-year variation of organochlorines in ice-associated amphipods from the Arctic Ocean

Organochlorines are found even in organisms living in remote areas such as the Arctic marginal ice zone. Organochlorine concentrations in ice-associated (sympagic) amphipods are related to their diet. Therefore, the size-dependent diet shift of Gammarus wilkitzkii may influence its organochlorine content. In this preliminary study, the organochlorine concentrations in two size classes (small 29 mm and large >29 mm) of G. wilkitzkii were analysed. The concentrations of more lipophilic compounds [e.g. polychlorinated biphenyls (PCBs)] were lower in the small than the large size class, whereas concentrations of less lipophilic compounds [e.g. hexachlorocyclohexanes (HCHs)] did not differ by size class.

Since contamination transport by the atmosphere, ocean currents and sea ice may vary, the organochlorine burden in sympagic organisms may also vary. There are no data available on temporal variation of organochlorine burden in Arctic sympagic fauna. Therefore, we compared organochlorine concentrations in sympagic amphipods (G. wilkitzkii, Apherusa glacialis and Onisimus spp.) between 1998 and 1999. Organochlorine concentrations in all amphipods were low in both years, with sum organochlorines from 50.7 to 621.9 ng g⁻¹ lipid weight. The concentrations of hexachlorobenzene (HCB), chlordanes, DDTs and PCBs were higher in 1999 than 1998, whereas the HCH concentrations were lower in 1999 than 1998. The organochlorine concentrations differed between the taxa in both years in a similar increasing manner from A. glacialis to both G. wilkitzkii and Onisimus spp.

In studies of bioaccumulation relative to body size and temporal variation, a thorough interpretation requires samples from several size classes and years. Nevertheless, the present data provide new knowledge on contaminants in Arctic invertebrates where data are scarce.     

Improving the precision of sample-based forest damage inventories through two-phase sampling and post-stratification using remotely sensed auxiliary information

Many countries have a national forest inventory (NFI) designed to produce statistically sound estimates of forest parameters. However, this type of inventory may not provide reliable results for forest damage which usually affects only small parts of the forest in a country. For this reason, specially designed forest damage inventories are performed in many countries, sometimes in coordination with the NFIs. In this study, we evaluated a new approach for damage inventory where existing NFI data form the basis for two-phase sampling for stratification and remotely sensed auxiliary data are applied for further improvement of precision through post-stratification. We applied Monte Carlo sampling simulation to evaluate different sampling strategies linked to different damage scenarios. The use of existing NFI data in a two-phase sampling for stratification design resulted in a relative efficiency of 50 % or lower, i.e., the variance was at least halved compared to a simple random sample of the same size. With post-stratification based on simulated remotely sensed auxiliary data, there was additional improvement, which depended on the accuracy of the auxiliary data and the properties of the forest damage. In many cases, the relative efficiency was further reduced by as much as one-half. In conclusion, the results show that substantial gains in precision can be obtained by utilizing auxiliary information in forest damage surveys, through two-phase sampling, through post-stratification, and through the combination of these two approaches, i.e., post-stratified two-phase sampling for stratification.     

Evaluating the biogas potential of the dry fraction from pretreatment of food waste from households

At the waste handling company NSR, Helsingborg, Sweden, the food waste fraction of source separated municipal solid waste is pretreated to obtain a liquid fraction, which is used for biogas production, and a dry fraction, which is at present incinerated. This pretreatment and separation is performed to remove impurities, however also some of the organic material is removed. The possibility of realising the methane potential of the dry fraction through batch-wise dry anaerobic digestion was investigated. The anaerobic digestion technique used was a two-stage process consisting of a static leach bed reactor and a methane reactor. Treatment of the dry fraction alone and in a mixture with structural material was tested to investigate the effect on the porosity of the leach bed. A tracer experiment was carried out to investigate the liquid flow through the leach beds, and this method proved useful in demonstrating a more homogenous flow through the leach bed when structural material was added. Addition of structural material to the dry fraction was needed to achieve a functional digestion process. A methane yield of 98 m³/ton was obtained from the dry fraction mixed with structural material after 76 days of digestion. This was in the same range as obtained in the laboratory scale biochemical methane potential test, showing that it was possible to extract the organic content in the dry fraction in this type of dry digestion system for the production of methane.