Speciated hydrocarbon emissions from small utility engines

Partially speciated hydrocarbon (HC) emissions data from several small utility engines, as measured by a Fourier Transform Infrared analyzer, are presented. The engines considered have nominal horsepower ratings between 3.7 and 9.3 kW. Both side-valve and overhead-valve engines are studied, and four different fuels are used in the engines. The results indicate that the small HCs present in the exhaust tend to be in the form of either methane or unsaturated HCs. Other small alkanes, such as ethane and propane, are present in only relatively small concentrations. In terms of ozone formation potential, the HCs in the form of methane will lead to little ozone, but the distribution of the C2 and C3 species is not ideal from an ozone reduction stand-point. It is also found that the presence of oxygen in the fuels appears to lead to somewhat more complete combustion, although the effects are not large. Finally, the overhead-valve engines appear to have lower HC emissions than side-valve engines, which is primarily due to higher operating A/F ratios and the engine geometry.     

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Demonstrating Floodplain Uncertainty Using Flood Probability Maps1

Abstract: The U.S. Federal Emergency Management Agency (FEMA) flood maps depict the 100‐year recurrence interval floodplain boundary as a single line. However, because of natural variability and model uncertainty, no floodplain extents can be accurately defined by a single line. This article presents a new approach to floodplain mapping that takes advantage of accepted methodologies in hydrologic and hydraulic analysis while including the effects of uncertainty. In this approach, the extents of computed floodplain boundaries are defined as a continuous map of flood probabilities, rather than as a single line. Engineers and planners can use these flood probability maps for viewing the uncertainty of a floodplain boundary at any recurrence interval. Such a flood probability map is a useful tool for visualizing the uncertainty of a floodplain boundary and represents greater honesty in engineering technologies that are used for flood mapping. While institutional barriers may prevent adoption of such definitions for use in graduated flood insurance rates (as most other insurance industries use to account for relative risks), the methods open the door technically to such a reality.     

Fish bioassay monitoring of waste effluents

Spills of toxic materials into bodies of water receiving industrial waste discharges can be prevented only if frequent or continuous assessments of effluent quality can be made. Currently available methods can automatically measure individual physical or chemical waste components but cannot assess toxicity caused by the interaction of components or the presence of an unsuspected material. Aquatic organisms, in contrast, respond to their total environment and in this way integrate the effects of all the various chemical and physical waste parameters.This study evaluates the possibility of using the continuously and automatically recorded responses of fish to monitor the toxicity of industrial waste effluents. A review of previously developed toxicity monitoring systems is followed by a field evaluation of a method that uses the computer-monitored ventilatory patterns of 12 bluegills (Lepomis macrochirus Rafinesque) to monitor the toxicity of an industrial waste effluent as it flows into a river. No known toxic spills occurred in the effluent during the operation of this system, but acetone added to the effluent waste caused responses from the fish at concentrations which peaked near the 96-hr LC₅₀ level. Some responses were also noted when no known toxicant was present; these were related to environmental disturbances and system design problems. Recommendations are made for the design of future biologic monitoring units.     

ROLE OF IRRIGATION WATER IN AGRICULTURAL PRODUCTION: SOME RESOURCE USE ISSUES1

ABSTRACT: A partial production function for corn that considers the time and amount of water applications is determined. Examples are worked out by using data on site specific parameters for nine soil sites in the Great Plains Region repesenting various combinations of water holding capacity, pan evaporation, and average rainfall. It is found that soils with a low water holding capacity are more water and energy intensive in crop production and thus more vulnerable to fluctuations in net returns due to declining water tables or energy shortages. Despite this, farmers of low water holding capacity soils are likely to opt for irrigation. This points to the existence of a necessary, but sufficient, condition for socially inefficient use of ground water resources. This calls to question the property right concept in water created through the appropriation doctrine and the “law of capture.” This paper indicates the type of analysis that must be undertaken in order to make appropriate changes in laws governing water use.     

PHREATOPHYTE EVAPOTRANSPIRATION AND ITS POTENTIAL REDUCTION WITHOUT ERADICATION1

ABSTRACT: The continuous availability of ground water to riparian phreatophytic vegetation results in large evapotranspiration (ET) losses in summer. Chemical or physical eradication of this vegetation can have undesirable environmental side effects. Spraying phreatophyte foliage with a nontoxic antitranspirant (AT) may reduce transpiration without eradication. Transpiration rate per unit leaf area was similar for several phreatophyte species, but ET per unit land area of phreatophytes depneds more on stand density than species. The mean ET for saltcedar in June was 8.1 mm/day measured by Bowen ratio, compared with 7.9 mm by lysimeters. ATs and growth-retardants reduced transpiration by over 50 percent in laboratory tests where foliage was thoroughly sprayed. In the field AT sprayed by a back-pack mistblower reduced ET by 20–35 percent initially and 10 percent after a month. No ET reduction occurred when AT was sprayed by helicopter on saltcedar, because excessive droplet size and heavy salt deposits on the foliage resulted in poor spray adherence. Wax-based AT was relatively nontoxic to fish and wildlife. Dissolved oxygen could be reduced for aquatic life, but further AT dilution in streams and ponds would minimize this. Helicopter spraying may affect bird nests and egg hatchability. Although ATs significantly reduce ET, their high cost and spraying difficulties preclude current use on phreatophytes. With improvement they may economically help to conserve water in riparian areas in future years.