Evaluation of CO exposure in active smokers while smoking using breath analysis technique

The current study evaluated the personal CO exposure of active smokers while smoking under controlled conditions, decay rate of CO in the body following active smoking, and CO accumulation in the body from repeated active smoking using a novel device for the direct measurement of alveolar breath CO. Prior to this evaluation, the proposed alveolar CO measurement device was successfully evaluated as regards the effect of humidity, CO recovery, carryover effect, and in comparison with the bag sampling method. The breath concentrations prior to and after a single cigarette were measured using a repeated measure design. Under the controlled conditions employed in the present study, active smoking was found to cause a significant body burden of CO. The post-exposure breath CO level was 1.6-2.0 times higher than the background breath level, depending on the subject and cigarette brand. In addition, the pre- and post-exposure breath concentrations were both significantly different among the subjects, yet the ratios of post-exposure to pre-exposure breath concentrations did not differ significantly between the different cigarette brands. The time-series alveolar breath concentrations measured following active smoking showed that the post-exposure alveolar CO concentrations decreased slowly even in the early phase of the decay curves, indicating a mono-compartment uptake and elimination model for the human body. The half-lives estimated in the present study (301, 315, and 385 min) were longer than or comparable to those in previous studies. The breath measurements prior to and after repeated active smoking exhibited a significant increasing trend for both the pre- and post-exposure concentrations. The changes in the pre- and post-exposure breath CO concentrations with repeated smoking ranged from 7% to 23% and from 10% to 15%, respectively, with half-hour intervals between cigarettes, and from 4% to 11% and from 6% to 8%, respectively, with hour intervals between cigarettes. Accordingly, most of the current results indicated that CO was accumulated in the human body with repeated active smoking.     

Evaluation of bioremediation effectiveness on crude oil-contaminated sand

A treatability study was conducted using sea sand spiked with 3% or 6% (w/w) of Arabian light crude oil to determine the most effective bioremediation strategies for different levels of contamination. The sea sand used in the study was composed of gravel (0.1%), sand (89.0%), and silt and clay (10.9%). The water content of the sea sand was adjusted to 12.6% (w/w) for the study. Different combinations of the following treatments were applied to the sand in biometer flasks: the concentration of oil (3% or 6%), the concentration of a mixture of three oil-degrading microorganisms (Corynebacterium sp. IC-10, Sphingomonas sp. KH3-2 and Yarrowia sp. 180, 1x10(6) or 1x10(8) cells g-1 sand), the concentration of the surfactant Tween 80 (1 or 10 times the critical micelle concentration), and the addition of SRIF in a C:N:P ratio of 100:10:3. Three biometer flasks per combination of experimental conditions were incubated, and the performance of each treatment was examined by monitoring CO2 evolution, microbial activity, and oil degradation rate. The results suggest that the addition of inorganic nutrients accelerated the rate of CO2 evolution by a factor of 10. The application of oil-degrading microorganisms in a concentration greater than that of the indigenous population clearly increased biodegradation efficiency. The application of surfactant slightly enhanced the oil degradation rate in the contaminated sand treated with the higher concentration of oil-degrading microorganisms. The initial CO2 evolution rate was shown to efficiently evaluate the treatability test by providing significant data within a short period, which is critical for the rapid determination of the appropriate bioremediation approach. The measurements of microbial activity and crude oil degradation also confirmed the validity of the CO2 evolution rate as an appropriate criterion.     

Development of effective hydrogen sulphide removing equipment using Thiobacillus sp.IW

Hydrogen sulphide is one of the commonest odours emitted by chemical plants. To remove the hydrogen sulphide biologically, a three phase fluidised bed bioreactor was used in which Thiobacillus sp.IW was immobilised on activated carbon. The optimum operating conditions of the bioreactor were 30 degrees C, pH7, aspect ratio (L/D) = 1 and at these conditions, the system removed over 94% of the hydrogen sulphide in the concentration range of 100-200 ppm and flow rate of 1.0-2.0 litre min(-1). From the upset and recovery test, the system proved stable within the moderate inlet concentration changes investigated.     

Trisomy 16 fetus surviving into the second trimester

A 27-year-old gravida 4, para 3 was found to have anhydramnios at 14 weeks' gestation following a size/date discrepancy noted at her routine prenatal visit. A detailed ultrasound revealed multiple fetal anomalies including congenital heart defect, chest hypoplasia, and bilateral dysplastic kidneys. Karyotype revealed trisomy 16 in 15/15 cells from a tissue specimen obtained from the fetal cord insertion site following elective pregnancy termination.     

Synthesis of copolyesters containing poly(ethylene terephthalate) and poly(ε-caprolactone) units and their susceptibility toPseudomonas sp. lipase

Copolyesters containing poly(ethylene terephthalate) (PET) and poly(-caprolactone) (PCL) were synthesized from PET and PCL homopolymers by transesterification reaction at 270°C in the presence of catalyst. The copolyesters were characterized by¹³C-NMR and differential scanning calorimetry (DSC). The degradation behavior of PCL byPseudomonas sp. lipase in buffer solution (pH 7) and tetrahydrofuran (THF) was investigated by gel permeation chromatography (GPC) and¹H-NMR. From these experiments, it was found thatPseudomonas sp. lipase acted endoenzymatically on PCL. Using this lipase, degradation tests for PET/PCL copolyesters whose PCL content was below 50% by weight were also performed in buffer solution (pH 7). However, evenPseudomonas sp. lipase with high degradation activity on PCL did not easily degrade the PCL unit in PET/PCL copolyesters.     

Removal characteristics of CO2 using aqueous MEA/AMP solutions in the absorption and regeneration process

The carbon dioxide (CO2) removal efficiency, reaction rate, and CO2 loading into aqueous blended monoethanolamine (MEA) + 2-amino-2-methyl-1-propanol (AMP) solutions to enhance absorption characteristics of MEA and AMP were carried out by the absorption/regeneration process. As a result, compared to aqueous MEA and AMP solutions, aqueous blended MEA+AMP solutions have a higher CO2 loading than MEA and a higher reaction rate than AMP. The CO2 loading of rich amine of aqueous 18 wt.% MEA+12 wt.% AMP solution was 0.62 mol CO2/mol amine, which is 51.2% more than 30 wt.% MEA (0.41 mol CO2/mol amine). Consequently, blending MEA and AMP could be an effective way to design cousidering economical efficiency and used to operate absorber for a long time.     

Salinity intrusion characteristics analysis using EFDC model in the downstream of Geum River

As social interest in the environmental conservation and ecological restoration has recently increased, more research works have been done to resolve problems concerning environmental management of estuaries. In this study, a three-dimensional numerical model, Environmental Fluid Dynamics Code (EFDC) was used in the analysis of the salinity intrusion characteristics in the downstream of Geum River. The numerical simulation was performed to investigate the influence range for salinity intrusion when the gates were fully opened. The conditions used for simulation were the four flow regimes in Geum River Basin, Korea. Results indicated that the ranges of salinity intrusion from the barrage were 50.72 km (drought flow), 48.87 km (low flow), 46.56 km (normal flow) and 42.10 km (flood flow). These results indicated that the EFDC model used for numerical simulation has high accuracy. The result concluded in this study can be used as a basis in understanding the extent of salinity intrusion e ects at di erent flow rates.     

Development of a cloud condensation nuclei (CCN) counter using a laser and charge-coupled device (CCD) camera

A continuous flow streamwise thermal gradient cloud condensation nuclei (CCN) counter with an aerosol focusing and a laser-charge-coupled device (CCD) camera detector system was developed here. The counting performance of the laser-CCD camera detector system was evaluated by comparing its measured number concentrations with those measured with a condensation particle counter (CPC) using polystyrene latex (PSL) and NaCl particles of varying sizes. The CCD camera parameters (e.g. brightness, gain, gamma, and exposure time) were optimized to detect moving particles in the sensing volume and to provide the best image to count them. The CCN counter worked well in the particle number concentration range of 0.6–8000 #·cm^-3 and the minimum detectable size was found to be 0.5 μm. The supersaturation in the CCN counter with varying temperature difference was determined by using size-selected sodium chloride particles based on K?hler equation. The developed CCN counter was applied to investigate CCN activity of atmospheric ultrafine particles at 0.5% supersaturation. Data showed that CCN activity increased with increasing particle size and that the higher CCN activation for ultrafine particles occurred in the afternoon, suggesting the significant existence of hygroscopic or soluble species in photochemically-produced ultrafine particles.     

Why Economics Matters for Endangered Species Protection

Abstract: We offer three reasons why economics matters more to species protection than many people think and what this implies for the ongoing debate over the reauthorization of the Endangered Species Act of 1973. Economics matters because (1) human behavior generally, and economic parameters in particular, help determine the degree of risk to a species; (2) in a world of scarce resources, the opportunity cost of species protection—the costs of reduced resources for other worthwhile causes—must be taken into account in decision making; and (3) economic incentives are critical in shaping human behavior, and consequently the recovery of species. Endangered species protection that explicitly addresses these basic principles can avoid wasting valuable resources that yield no gain in species protection.     

Environmental and public health co-benefits of consumer switches to immunity-supporting food

During COVID-19, there has been a surge in public interest for information on immunity-boosting foods. There is little scientific support for immunity-supporting properties of specific foods, but strong evidence for food choice impacts on other health outcomes (e.g. risk of non-communicable disease) and environmental sustainability. Here, we relate online recommendations for “immunity-boosting” foods across five continents to their environmental and human health impacts. More frequently recommended food items and groups are plant based and have lower land use and greenhouse gas emission impacts plus more positive health outcomes (reducing relative risks of mortality or chronic diet-related diseases) per serving of food. We identify trade-offs between environmental outcomes of increasing consumption of recommended food items, with aquatic environment impacts increasing with food recommendation frequency. People’s reliance on the Internet for health information creates an opportunity to consolidate behaviour change towards consuming foods with multiple co-benefits. Our study identifies win–win options for nudging online information-seeking behaviour towards more sustainable choices for terrestrial biodiversity conservation and human health.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01693-w.