Simultaneous DOAS and mist-chamber IC measurements of HONO in Houston,TX

Nitrous acid is an important component of nighttime N-oxide chemistry, and provides a significant source of both OH and NO in polluted urban air masses shortly after sunrise. Several recent studies have called for new sources of HONO to account for daytime levels much higher than are consistent with current understanding. However, measurement of HONO is problematic, with most in-situ techniques reporting higher values than simultaneous optical measurements by long-path DOAS, especially during daytime. The discrepancy has been attributed to positive interference in the in-situ techniques, negative interference in DOAS retrievals, the difficulty of comparing the different air masses sampled by the methods, or combinations of these.During August and September 2006, HONO mixing ratios from collocated long-path DOAS and automated mist-chamber/ion chromatograph (MC/IC) systems ranged from several ppbv during morning rush hour to daytime minima near 100 pptv. Agreement between the two techniques was excellent across this entire range during many days, showing that both instruments accurately measured HONO during this campaign. A small bias towards higher LP-DOAS observations at night can be attributed to slow vertical mixing leading to pronounced HONO profiles. A positive daytime bias of the MC/IC instrument during several days in late August/early September was correlated with photochemically produced compounds such as ozone, HNO₃ and HCHO, but not with NO₂, NO_x, HO₂NO₂, or the NO₂ photolysis rate. While an interferant could not be identified organic nitrites appear a possible explanation for our observations.     

Occurrence and distribution of pharmaceuticals in wastewater from households, livestock farms, hospitals and pharmaceutical manufactures

Twenty-four pharmaceuticals were measured in wastewater from 12 municipal wastewater treatment plants (M-WWTPs), four livestock WWTPs (L-WWTPs), four hospital WWTPs (H-WWTPs) and four pharmaceutical manufacture WWTPs (P-WWTPs). The total concentration of pharmaceuticals in the influent samples was highest in the L-WWTPs followed by the P-WWTPs, H-WWTPs and M-WWTPs. The effluents had different patterns of pharmaceuticals than their corresponding influents because of the different fate of each compound in the WWTPs. Non-steroidal anti-inflammatory drugs (NSAIDs) were the most dominant in the influents from the M-WWTPs and P-WWTPs, while antibiotics were dominantly detected in the L-WWTP. In the H-WWTP influents, NSAIDs, caffeine and carbamazepine were dominant. In the P-WWTPs, the distribution of pharmaceuticals in the effluents varied with sampling sites and periods. The M-WWTP influents had the highest daily loads, while the effluents showed somewhat similar levels in all source types.     

Effect of chemical amendments on remediation of potentially toxic trace elements (PTEs) and soil quality improvement in paddy fields

Remediation of potentially toxic trace elements (PTEs) in paddy fields is fundamental for crop safety. In situ application of chemical amendments has been widely adapted because of its cost-effectiveness and environmental safety. The main purpose of this research was to (1) evaluate the reduction in dissolved concentrations of cadmium (Cd) and arsenic (As) with the application of chemical amendments and (2) monitor microbial activity in the soil to determine the remediation efficiency. Three different chemical amendments, lime stone, steel slag, and acid mine drainage sludge, were applied to paddy fields, and rice (Oryza sativa L. Milyang 23) was cultivated. The application of chemical amendments immobilized both Cd and As in soil. Between the two PTEs, As reduction was significant (p < 0.05) with the addition of chemical amendments, whereas no significant reduction was observed for Cd than that for the control. Among six soil-related variables, PTE concentration showed a negative correlation with soil pH (r = ?0.70 for As and r = ?0.54 for Cd) and soil respiration (SR) (r = ?0.88 for As and r = ?0.45 for Cd). This result indicated that immobilization of PTEs in soil is dependent on soil pH and reduces PTE toxicity. Overall, the application of chemical amendments could be utilized for decreasing PTE (As and Cd) bioavailability and increasing microbial activity in the soil.     

Persistent organochlorine residues in estuarine and marine sediments from Ha Long Bay, Hai Phong Bay, and Ba Lat Estuary, Vietnam

To assess the organochlorine contamination in the northeast coastal environment of Vietnam, a total of 41 surface sediments were collected from Ha Long Bay, Hai Phong Bay, and Ba Lat estuary, and analyzed for their organochlorine content. Organochlorine compounds (OCs) were widely distributed in the Vietnamese coastal environment. Among the OCs measured, DDT compounds predominated with concentrations ranging from 0.31 to 274 ng g(-1). The overall contamination level of DDTs in coastal sediments from northern Vietnam is comparable with those from other Asian countries. However, concentrations exceeding 100 ng g(-1) are comparable with high concentrations reported from India and China, the largest DDT consumers in the world. The overall concentrations of PCBs, HCHs, and chlordanes in surface sediments were in the ranges of 0.04-18.71 ng g(-1), not detected (n.d.) - 1.00 ng g(-1), and n.d. - 0.75 ng g(-1), respectively. Ha Long Bay and Hai Phong Bay were relatively more contaminated with DDTs and PCBs than other regions, respectively. In contrast, the distribution of HCHs was relatively homogeneous. OCs contamination in the coastal environment of Vietnam is closely related to shipping and industrial activities. The levels of DDT compounds in harbors and industrial areas exceeded their sediment quality guideline values suggested by Environment Canada [CCME (Canadian Council of Ministers of the Environment), 2002. Canadian sediment quality guidelines for the protection of aquatic life. In: Canadian Environmental Quality Guidelines. Canadian Council of Ministers of the Environment, Winnipeg, MB] and Australian and New Zealand [ANZECC and ARMCANZ, 2000. National water quality management strategy. Paper No. 4, Australian and New Zealand Guidelines for Fresh and Marine Water Quality, vol. 1, The Guidelines. Australia. Document: http://www.deh.gov.au/water/quality/nwqms/volume1.html], indicating that adverse effects may occur to marine species in that areas.     

Applicability of grid-net detection system for landfill leachate and diesel fuel release in the subsurface

The grid-net system estimating the electrical conductivity changes was evaluated as a potential detection system for the leakage of diesel fuel and landfill leachate. Aspects of electrical conductivity changes were varied upon the type of contaminant. The electrical conductivity in the homogeneous mixtures of soil and landfill leachate linearly increased with the ionic concentration of pore fluid, which became more significant at higher volumetric water contents. However, the electrical conductivity in soil/diesel fuel mixture decreased with diesel fuel content and it was more significant at lower water contents. The electrode spacing should be determined by considering the type of contaminant to enhance the electrode sensitivity especially when two-electrode sensors are to be used. The electrode sensitivity for landfill leachate was constantly maintained regardless of the electrode spacings while that for the diesel fuel significantly increased at smaller electrode spacings. This is possibly due to the fact that the insulating barrier effect of the diesel fuel in non-aqueous phase was less predominant at large electrode spacing because electrical current can form the round-about paths over the volume with relatively small diesel fuel content. The model test results showed that the grid-net detection system can be used to monitor the leakage from waste landfill and underground storage tank sites. However, for a successful application of the detection system in the field, data under various field conditions should be accumulated.     

Removal characteristics of CO2 using aqueous MEA/AMP solutions in the absorption and regeneration process

The carbon dioxide (CO2) removal efficiency, reaction rate, and CO2 loading into aqueous blended monoethanolamine (MEA) + 2-amino-2-methyl-1-propanol (AMP) solutions to enhance absorption characteristics of MEA and AMP were carried out by the absorption/regeneration process. As a result, compared to aqueous MEA and AMP solutions, aqueous blended MEA+AMP solutions have a higher CO2 loading than MEA and a higher reaction rate than AMP. The CO2 loading of rich amine of aqueous 18 wt.% MEA+12 wt.% AMP solution was 0.62 mol CO2/mol amine, which is 51.2% more than 30 wt.% MEA (0.41 mol CO2/mol amine). Consequently, blending MEA and AMP could be an effective way to design cousidering economical efficiency and used to operate absorber for a long time.     

Assessment of PCDD/F risk after implementation of emission reduction at a MSWI

Municipal solid waste incinerators (MSWIs) have been shown to be important sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). The emission of PCDD/Fs by MSWIs is a controversial subject in human health risk assessment. In this study the effect of a MSWI on a residential area was assessed before and after the installation of an additional treatment system for flue gas. This additional treatment system resulted in a dramatic decrease in PCDD/F concentrations in stack flue gas samples by 99.98%, while the concentrations in air decreased by approximately 50% (36,500 and 0.75 pg I-TEQ m(-3) for air in 1999; 3.5 and 0.38 pg I-TEQ m(-3) in 2002; 1.6 and 0.076 pg I-TEQ m(-3) in 2005 for stack gas and air, respectively). Considering the congener distributions of PCDD/Fs between stack flue gas and air samples, the study area seemed to have been contaminated by other urban sources as well as the MSWI. ISC3 model results support the conclusion that this incinerator became only a minor contributor to the study area after installation of the supplementary systems. This resulted from both proper MSWI operation using modern technology and additional sources of contaminants in this region. Finally, PCDD/F uptake by humans through inhalation of contaminated air was estimated. Assuming that inhalation exposure contributes 10% of total exposure, total exposure was lower than WHO guidelines. These results confirm that proper operation and maintenance of the incinerator led to a reduction in emissions and potential health impacts of PCDD/Fs.     

Response surface optimization of substrates for thermophilic anaerobic codigestion of sewage sludge and food waste

This study investigated the effects of food waste constituents on thermophilic (55 degrees C) anaerobic codigestion of sewage sludge and food waste by using statistical techniques based on biochemical methane potential tests. Various combinations of grain, vegetable, and meat as cosubstrate were tested, and then the data of methane potential (MP), methane production rate (MPR), and first-order kinetic constant of hydrolysis (kH) were collected for further analyses. Response surface methodology by the Box-Behnken design can verify the effects and their interactions of three variables on responses efficiently. MP was mainly affected by grain, whereas MPR and kH were affected by both vegetable and meat. Estimated polynomial regression models can properly explain the variability of experimental data with a high-adjusted R2 of 0.727, 0.836, and 0.915, respectively. By applying a series of optimization techniques, it was possible to find the proper criteria of cosubstrate. The optimal cosubstrate region was suggested based on overlay contours of overall mean responses. With the desirability contour plots, it was found that optimal conditions of cosubstrate for the maximum MPR (56.6 mL of CH4/g of chemical oxygen demand [COD]/day) were 0.71 g of COD/L of grain, 0.18 g of COD/L of vegetable, and 0.38 g of COD/L of meat by the simultaneous consideration of MP, MPR, and kH. Within the range of each factor examined, the corresponding optimal ratio of sewage sludge to cosubstrate was 71:29 as the COD basis. Elaborate discussions could yield practical operational strategies for the enhanced thermophilic anaerobic codigestion of sewage sludge and food waste.     

Using GA-Ridge regression to select hydro-geological parameters influencing groundwater pollution vulnerability

For groundwater conservation and management, it is important to accurately assess groundwater pollution vulnerability. This study proposed an integrated model using ridge regression and a genetic algorithm (GA) to effectively select the major hydro-geological parameters influencing groundwater pollution vulnerability in an aquifer. The GA-Ridge regression method determined that depth to water, net recharge, topography, and the impact of vadose zone media were the hydro-geological parameters that influenced trichloroethene pollution vulnerability in a Korean aquifer. When using these selected hydro-geological parameters, the accuracy was improved for various statistical nonlinear and artificial intelligence (AI) techniques, such as multinomial logistic regression, decision trees, artificial neural networks, and case-based reasoning. These results provide a proof of concept that the GA-Ridge regression is effective at determining influential hydro-geological parameters for the pollution vulnerability of an aquifer, and in turn, improves the AI performance in assessing groundwater pollution vulnerability.     

Analysis on biochemical methane potential of agricultural byproducts with different types of silage storage

The aim of this work is to estimate biogas production by anaerobic digestion of agricultural byproduct silage at the low carbon green village in South Korea. The composition of agricultural byproduct from hot pepper farms was analyzed and it was found to be favorable with anaerobic digestion. In the cases of silage materials, the theoretical methane potentials of all of the ensiled materials were increased with silage storage having an increased range from 103 to 120 % compared to that without ensiling. The biochemical methane potential (BMP) tests showed that the ultimate methane potential of ensiled material was measured to be higher than that of raw material without silage storage, while the first order hydrolysis constant was lower. All of the silage materials containing microbial additives used in this study showed higher ultimate methane potentials and first order hydrolysis constants than raw material and silage material without additives. The change of ultimate methane potential was analyzed over time, and all of the test materials, except Day 2, showed higher ultimate methane potential than raw material, Day 0, and the highest was found on Day 40.