Temperature dependent properties of environmentally important synthetic musks

Environmental fate determining physical properties including their temperature dependence for five nitro musks and for seven polycyclic musks were estimated. The properties evaluated were vapor pressure in a solid and liquid state (PS and PL), solubility in water (S), Henry's law coefficient (H = PL/S) and log octanol-water partition coefficient (log KOW). Gas chromatography for starting values of vapor pressure estimation and HPLC experiments at 5-20 degrees C for comparison of the theoretical versus experimental solubilities in water were performed. The values of temperature (T) dependence coefficients (Ai and Bi) in equations: log (Property)i = Ai - Bi/T were determined. Values of properties were compared with literature-based data, and an example of their use in environmental hazard estimation by fate modeling was given.     

Effects of soil phosphorus status on environmental risk assessment of glyphosate and glufosinate-ammonium

The increased use of herbicides poses a risk to the aquatic environment. Easy and economical methods are needed to identify the fields where specific environment protection measures are needed. Phosphorus (P) and organophosphorus herbicides compete for the same adsorption sites in soil. In this study the relationship between P obtained in routine Finnish agronomic tests (acid ammonium acetate [P(AC)]) and adsorption of glyphosate and glufosinate-ammonium was investigated to determine whether P(AC) values could be used in the risk assessment. The adsorption of glyphosate ((N-(phosphonomethyl)glycine) and glufosinate-ammonium (2-amino-4-(hydroxymethylphosphinyl)butanoic acid) was studied in a clay and a sandy loam soil enriched with increasing amounts of P added as potassium dihydrogen phosphate. Desorption was also determined for some P-enriched soil samples. The adsorption of both herbicides diminished with increasing P(AC) value. The correlations between Freundlich adsorption coefficients obtained in the adsorption tests and P(AC) were nonlinear but significant (r > 0.98) in both soils. The exponential models of the relationship between soil P(AC) values and glyphosate adsorption were found to fit well to an independent Finnish soil data set (P < 0.1 for glyphosate and P < 0.01 for glufosinate-ammonium). The desorption results showed that glufosinate-ammonium sorption is not inversely related to soil P status, and the high correlation coefficients obtained in the test of the model were thus artifacts caused by an abnormal concentration of exchangeable potassium in soil. The solved equations are a useful tool in assessing the leaching risks of glyphosate, but their use for glufosinate-ammonium is questionable.     

Analyses of known and new types of polyhalogenated aromatic substances in oven ash from recycled aluminium production

Persistent aromatic bromine, chlorine and mixed chlorine-bromine compounds were analysed from recycled aluminium smelter (ALS) ashes to explore the impact of brominated flame retardants (BFR) on their formation. Polybrominated diphenyl ethers (PBDE) were the most abundant original BFRs found. Induction furnace ash contained tetra- to octa-BDEs about 2000ng g(-1) in similar congener ratios as the original scrap, but contents of nona- and deca-BDEs were only 25 and 5ng g(-1) indicating their significant degradation in ALS process. In the most non-polar fraction, PCB levels and profiles were similar as earlier ALS ash samples in 1990s. The highest PCB level measured was that of deca-CB (450ng g(-1)) in the induction furnace ash. In this fraction, bromo compounds were non-detectable (<5ng g(-1)). Fraction of the most polar compounds (from reversed toluene elution of carbon column ("dioxin fraction") contained PCDDs, PCDFs and polychlorinated dibenzothiophenes (PCDTs) in similar amounts and congener profiles as earlier investigated ALS ash samples. Bromine-containing dioxin and furan congeners were not detected. From individual PCDDs and PCDFs, octaCDF was the most abundant (205ng g(-1)) in induction furnace ash. In this fraction, the original BFR, tetrabromo-bisphenol-A, was identified. Its level in the induction furnace ash was approximated to be 388ng g(-1). In addition, 12 novel brominated and chlorinated compounds were found as abundant (8-441ng g(-1) in the induction furnace ash) contaminants from the fraction. Four of them were bisphenol derivatives, five biphenylols, then octachlorofluorenone (OCFL) and octachlorobiphenylene (OCBP). Their structures or structure types were deduced from total low-resolution EI mass spectra by theoretical isotope cluster simulation (ICLU) and through known fragmentation rules.     

PCDTs in the environment

Polychlorinated dibenzothiophenes (PCDTs) are sulfur analogues of polychlorinated dibenzofurans. Recently, PCDTs have been found in stack gas and fly ash samples, pulp mill effluents, sediments and in some aquatic organisms. PCDTs have been analyzed by high resolution GC/MS and by other GC-MS techniques. Combustion is until now the major known source of PCDTs in the environment. Tri-, tetra- and pentaCDTs in concentrations approaching those of PCDTs have been analyzed in some samples from waste incineration and metal reclamation. Concentrations of PCDTs in pulp mill effluents have been found to be quite low. 2378-TeCDT was found to be the major TeCDT isomer in some pulp mill effluents. Preliminary toxicological investigations have shown that PCDTs possess some kind of dioxin type toxicity.     

Identification and level estimation of chlorinated neutral aromatic sulfur compounds and their alkylated derivatives in pulp mill effluents and sediments

Seven effluent samples from a modern pulp mill, in which chlorine and chlorine dioxide bleaching is used, and five sediment samples from the recipient watercourse were investigated for polychlorinated dibenzothiophenes (PCDBTs), polychlorinated thianthrenes (PCTAs), polychlorinated diphenylsulfides (PCDPSs) and for alkylated derivatives of these. Mainly di-, tri-, tetra- and pentachlorinated congeners were studied. Particles and filtrates from the effluents were analyzed separately. The concentration levels of the nonalkylated compounds were found to be higher in the filtrates than in the particles. Trichlorinated dibenzothiophenes and thianthrenes were found as the major congeners. Pentachlorinated derivatives were not found. Alkylated di- and trichlorodibenzothiophenes were detected in some samples, while alkylated chlorinated thianthrenes and diphenylsulfides were nondetectable. The estimated concentration levels of the compounds detected were in the range of 40–2700 pg/L in the pulp mill effluents and in the range of 2–40 pg/g dry weight in the sediments. Mixtures of methylated di- and trichlorodibenzothiophenes used as references in analyses were prepared from methylchlorobiphenyls. Some new pure model compounds were obtained by HPLC fractionation of the chlorination mixture of dibenzothiophene. Structures of these were determined by ¹H NMR.     

Polychlorinated dibenzothlophenes in bleached pulp mill effluents

Polychlorinated dibenzothiophenes, PCDBTs, have been analysed with HRGC/HRMS from different bleached pulp mill effluents. 2,3,7,8-TeCDBT was found to be the dominating TeCDBT isomer in some samples. The estimated concentrations of the TeCDBTs in the samples were < 1 to 60 pg/L. PeCDBTs and other higher chlorinated PCDBTs were not found (< 1 pg/L).     

A wood preservative metabolite in river water

- A previously unknown pollutant in river water was identified to be 2-mercaptobenzothiazole (2-MBT) by interpretation and simulation of its GC/LRMS spectrum. Further GC/HRMS measurement of the isotope composition of the molecular ion verified this structure. 2-MBT is a well-known agent for corrosion inhibition and a stable metabolite of several other benzothiazoles. The present 2-MBT trace was most probably a metabolite of the wood preservative TCMTB which leaked from an upstream sawmill. The metabolite had been detected earlier in urine of the sawmill workers, but now was identified in the recipient water environment for the first time.     

Polybrominated methoxy diphenyl ethers (MeO-PBDEs) in fish and guillemot of Baltic, Atlantic and Arctic environments

Arctic cod liver samples from Vestertana Fjord at the Arctic coast of Norway, salmon and guillemot samples from the Baltic Sea and the Atlantic Ocean, and salmon and lamprey larva samples from Kymijoki River in southern Finland were analysed for the occurrence of tri-, tetra- and pentabromomethoxy diphenyl ethers and their concentration levels were estimated. These compounds have previously been identified by other research groups in salmon, seal and dolphin samples. The aim of this study was to find out a possible temporal trend in the concentrations of these compounds in the cod liver samples from years 1987-1998 and to investigate the possible spatial differences in the concentrations in biota samples from the Baltic Sea, Atlantic Ocean, Arctic Sea and contaminated freshwater river. Two most abundant methoxy-tetrabromo diphenyl ether congeners occurred in the same statistically significant ratio in 14 sea biota samples. Levels in lamprey larvae were below detection limit. The origin of these methoxylated bromodiphenyl ethers in biota samples remained unknown. They may be metabolites of polybrominated diphenyl ethers used as flame retardants or compounds of natural origin.