Factors affecting the distribution of microplastics in soils of China

● Microplastic (MP) abundance in soil of China was highly heterogeneous. ● MP abundance was higher near large rivers and central land affected by monsoons. ● MP abundance was correlated with longitude, mulching film, and average temperature. ● Factors suitable for predicting MP pollution using models were discussed. Microplastics (MPs) are found worldwide in high abundance, posing a potential threat to ecosystems. Despite the ubiquity of MPs in the environment, very little is known about the regional distribution of MPs and underlying factors affecting this distribution in the field, which likely include human activity, but also features of the environment itself. Here, out of a total of 1157 datapoints investigated in 53 Chinese studies, 9.68% datapoints were removed as outliers in the heterogeneity analysis. This review revealed that the abundance of MPs was highly heterogeneous. In addition, microplastic (MP) distribution maps based on China demonstrated that the highest abundance of MPs tended to occur near large rivers and central land affected by the intersection of two monsoons. The model-fitting and previous studies showed that MP abundance in China was correlated with longitude, agricultural mulching film usage per capita, temperature, and precipitation. However, due to the heterogeneity of MPs and the low matching degree between the current environmental data and the sampling points, this pattern was not as evident as reported in any single study. Factors affecting the distribution of MPs can not be captured by linear relationships alone, and systematic selection of suitable environmental factors and further model optimization are needed to explore the cause of MP pollution in soil. Overall, this review revealed an uneven distribution of MPs and serves as a reference for model prediction to assess and control plastic pollution in natural soil environments.     

Trait-mediated effects on flowers: artificial spiders deceive pollinators and decrease plant fitness

Although predators can affect foraging behaviors of floral visitors, rarely is it known if these top-down effects of predators may cascade to plant fitness through trait-mediated interactions. In this study we manipulated artificial crab spiders on flowers of Rubus rosifolius to test the effects of predation risk on flower-visiting insects and strength of trait-mediated indirect effects to plant fitness. In addition, we tested which predator traits (e.g., forelimbs, abdomen) are recognized and avoided by pollinators. Total visitation rate was higher for control flowers than for flowers with an artificial crab spider. In addition, flowers with a sphere (simulating a spider abdomen) were more frequently visited than those with forelimbs or the entire spider model. Furthermore, the presence of artificial spiders decreased individual seed set by 42% and fruit biomass by 50%. Our findings indicate that pollinators, mostly bees, recognize and avoid flowers with predation risk; forelimbs seem to be the predator trait recognized and avoided by hymenopterans. Additionally, predator avoidance by pollinators resulted in pollen limitation, thereby affecting some components of plant fitness (fruit biomass and seed number). Because most pollinator species that recognized predation risk visited many other plant species, trait-mediated indirect effects of spiders cascading down to plant fitness may be a common phenomenon in the Atlantic rainforest ecosystem.     

Human intoxication by agrochemicals in the region of South Brazil between 1999 and 2014

The objective of this study was to evaluate pesticide poisonings in the southern region of Brazil between years 1999 and 2014. Data were collected from the database Sinitox. Intoxications and deaths were evaluated according to the distribution by gender (female and male), age group (≤14, 15–59 and ≥60 years), area of occurrence (urban and rural), circumstance (accident, occupational and suicide attempt) and evolution of the cases over time (cure, unconfirmed cure, death and sequelae). In the evaluated period, 21,305 cases of intoxication were registered. The results show that males between the ages of 15 and 59 years are more affected; and there is a greater representativeness in the urban area. These results are related to the application of agrochemicals being carried out by individuals between 15 and 59 years of age. The great correlation of urban area possibly occurs in function of the air currents brought from the field and as a result, population has been more affected and the consumption of contaminated food. It was observed that women handling pesticides more cautiously, in this way the accidents with male gender are more frequent, however, many women use the product intentionally to provoke suicide.     

Modeling emissions for three-dimensional atmospheric chemistry transport models

Poor air quality is still a threat for human health in many parts of the world. In order to assess measures for emission reductions and improved air quality, three-dimensional atmospheric chemistry transport modeling systems are used in numerous research institutions and public authorities. These models need accurate emission data in appropriate spatial and temporal resolution as input. This paper reviews the most widely used emission inventories on global and regional scales and looks into the methods used to make the inventory data model ready. Shortcomings of using standard temporal profiles for each emission sector are discussed, and new methods to improve the spatiotemporal distribution of the emissions are presented. These methods are often neither top-down nor bottom-up approaches but can be seen as hybrid methods that use detailed information about the emission process to derive spatially varying temporal emission profiles. These profiles are subsequently used to distribute bulk emissions such as national totals on appropriate grids. The wide area of natural emissions is also summarized, and the calculation methods are described. Almost all types of natural emissions depend on meteorological information, which is why they are highly variable in time and space and frequently calculated within the chemistry transport models themselves. The paper closes with an outlook for new ways to improve model ready emission data, for example, by using external databases about road traffic flow or satellite data to determine actual land use or leaf area. In a world where emission patterns change rapidly, it seems appropriate to use new types of statistical and observational data to create detailed emission data sets and keep emission inventories up-to-date.

Implications: Emission data are probably the most important input for chemistry transport model (CTM) systems. They need to be provided in high spatial and temporal resolution and on a grid that is in agreement with the CTM grid. Simple methods to distribute the emissions in time and space need to be replaced by sophisticated emission models in order to improve the CTM results. New methods, e.g., for ammonia emissions, provide grid cell–dependent temporal profiles. In the future, large data fields from traffic observations or satellite observations could be used for more detailed emission data.     

Contamination by lead in sediments at Toledo River,hydrographic basin of PARANÁ III

Due to intense agricultural and industrial activities, the environment has been affected by increasing amounts of pollutants, such as lead, a toxic heavy metal. When introduced to the environment, toxic metals are distributed and incorporated into the liquid medium, sediments, and aquatic biota; bioaccumulating. This research aimed to identify and quantify the levels of toxic metals present in the waters and sediments of Toledo River, compare the obtained results with legislation and other studies, as well as to evaluate the possible pollutant sources of the water body. Six water and sediment samples were taken at seven strategic sites. The concentrations of Cu, Zn, Fe, Mn, Cd, Pb, and Cr in water were compared to the maximum limits established by Brazilian legislation IN CONAMA No. 357/05, for class II fresh waters. The sediment samples were submitted to nitroperchloric digestion, and then the total concentrations of the metals were determined by flame atomic absorption spectrometry (FAAS). The toxicological quality of the Toledo River has been considerably affected by the activities carried out in its surroundings, such as extensive areas of agriculture, pig farming and industrial areas, causing concentrations of Cd, Fe, and mainly Pb, which is observed at concentrations higher than value allowed by the legislation.     

Styrene/Lignin-Based Polymeric Composites Obtained Through a Sequential Mass-Suspension Polymerization Process

A modified sequential mass-suspension polymerization was employed to ensure adequate dispersion of lignin into the monomeric phase. Due to its complex macromolecular structure and low compatibility with styrene, eucalyptus wood-extracted lignin, via a modified Kraft method, was esterified with methacrylic anhydride to ensure organic phase homogeneity into the reaction medium. Infrared spectroscopy showed a decrease in the hydroxyl band, a characteristic of natural lignin (3200–3400 cm^?1) and an increase in the characteristic ester band (1720–1740 cm^?1) whereas nuclear magnetic resonance measurements exhibited intense peaks in the range from 1.7 to 2.05 ppm (–CH₃) and 5.4 to 6.2 ppm (=CH₂), related to methacrylic anhydride. Comparatively, the esterified lignin also displayed an increase of its glass transition temperature for 98?°C, related to natural lignin, whose T _g was determined to be equal to 91?°C. Styrene/lignin-based polymers exhibited higher average molar masses in comparison to the values observed for polystyrene synthesized with similar amounts of benzoyl peroxide, due to the ability of lignin to act as a free-radical scavenger. Composites obtained with styrene and natural or esterified lignin were successfully synthesized, presenting regular morphology and proper lignin dispersion. Based on a very simple polymerization system, it is possible to enhance the final properties of polystyrene through the incorporation of lignin, which represents an important platform for developing attractive polymeric materials from renewable resources.     

Integrated hydro- and wind power generation: a game changer towards environmental flow in the Sub-middle and Lower São Francisco River Basin?

Many renewable resources for the generation of electricity, such as hydropower and wind power, are dependent on climatic factors. Reservoirs have been created to overcome the stochastic nature of river flows and to make water supply more reliable. However, reservoirs are affecting the ecological status of river ecosystems, e.g., by modifying the flow regime, triggering discussions regarding the discharge of reservoirs. In Brazil’s northeast region, the installed capacity for wind power generation has increased substantially in recent years. Setting up a modeling system for simulating wind power and hydropower generation in this study, it is analyzed whether wind power generation, peaking in the dry season, can help to achieve a more environmentally oriented flow regime in the Sub-middle and Lower São Francisco River Basin. Simulated higher discharges from reservoirs during the rainy season and lower discharges during the dry season, representing a more natural flow regime, will reduce hydropower generation in the dry season. Under recent conditions, the resulting gap in electricity generation can only be partially covered by wind power. A large share needs to be generated by thermal power plants or be imported from other regions in Brazil. The planned future increase in installed wind power capacity can change this picture; the demand for electricity generated by thermal power plants and imported will decrease. Adopting an integrated approach for hydropower and wind power generation, the flow regime in the Sub-middle and Lower São Francisco River Basin can be modified to improve the ecological status of the river system.     

Use of Maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.) for phytomanagement of Cd-contaminated soils: a critical review

Maize (Zea mays L.) has been widely adopted for phytomanagement of cadmium (Cd)-contaminated soils due to its high biomass production and Cd accumulation capacity. This paper reviewed the toxic effects of Cd and its management by maize plants. Maize could tolerate a certain level of Cd in soil while higher Cd stress can decrease seed germination, mineral nutrition, photosynthesis and growth/yields. Toxicity response of maize to Cd varies with cultivar/varieties, growth medium and stress duration/extent. Exogenous application of organic and inorganic amendments has been used for enhancing Cd tolerance of maize. The selection of Cd-tolerant maize cultivar, crop rotation, soil type, and exogenous application of microbes is a representative agronomic practice to enhance Cd tolerance in maize. Proper selection of cultivar and agronomic practices combined with amendments might be successful for the remediation of Cd-contaminated soils with maize. However, there might be the risk of food chain contamination by maize grains obtained from the Cd-contaminated soils. Thus, maize cultivation could be an option for the management of low- and medium-grade Cd-contaminated soils if grain yield is required. On the other hand, maize can be grown on Cd-polluted soils only if biomass is required for energy production purposes. Long-term field trials are required, including risks and benefit analysis for various management strategies aiming Cd phytomanagement with maize.     

Determining soil quality in urban agricultural regions by soil enzyme-based index

Urban agricultural soils are highly variable, and careful selection of sensitive indicators is needed for the assessment of soil quality. This study is proposed to develop an index based on soil enzyme activities for assessing the quality of urban agricultural soils. Top soils were collected from urban agricultural areas of Korea, and soil chemical properties, texture, microbial fatty acids, and enzyme activities were determined. The soils belonged to five textural classes with the highest frequency of sandy loam. There was no clear correlation between the soil chemical properties and soil microbial properties. Principal component analysis (PCA) and factor analysis were applied to microbial groups for identification of microbial community variation in soils. Two soil groups, namely group 1 (G1) and group 2 (G2), based on microbial community abundance were examined by PCA, and those were more prominent in factor analysis. The G1 soils showed higher microbial community abundance than G2 soils. The canonical discriminant analysis was applied to the enzyme activities of sandy loam soil to develop an index, and the index validation was confirmed using the unused soils and published data. The high-quality soils in published literature assigned the high valued index. Microbial fatty acids and soil enzyme activities can be suitable indicators for soil quality evaluation of urban agricultural soils.

     

The Emissions of Major Aromatic Voc as Landfill Gas from Urban Landfill Sites in Korea

In this study, concentrations of major aromatic VOCs were determined from landfill gas (LFG) at a total of five municipal landfill sites in Korea including Nan Ji (NJ), Woon Jung (WJ), Sam Poong (SP), Hoei Chun (HC), and No Hyung (NH). The concentration levels of those VOC were found to be significantly different, mainly as a function of such a parameter as landfill aging. The VOC concentrations measured from the unclosed landfill sites (e.g., WJ) were characterized by exceedingly high values above a few tens of ppm. However, the results of the abandoned site (e.g., SP) were about three orders of magnitude lower than the others so as to merely exceed the typical ambient concentration levels. It was most striking to find a systematic dominance of toluene over other aromatic VOC under most circumstances. The LFG flux values of all aromatic VOC and the four specific major ones (termed as BTEX: benzene, toluene, ethylbenzene, and xylene) were also computed for each vent pipe from all study sites using their concentrations and the concurrently determined environmental parameters. The results, if calculated in terms of the average BTEX quantity emitted per vent pipe, showed that the magnitude of their emissions can vary substantially, with the values ranging from 0.05 (SP) to 49.2 kg yr⁻¹ (WJ in wintertime). The LFG flux values of aromatic VOC, when compared to the contribution of non-methane hydrocarbons (NMHC), were able to explain a constant, but minor, proportion of the LFG carbon budget.