The relationship between whole effluent toxicity (WET) and chemical-based effluent quality assessment in Vojvodina (Serbia)

The relationship between whole effluent toxicity (WET) and chemical-based effluent quality assessment across a range of effluent types was examined for the first time in Serbia. WET was determined by Daphnia magna acute tests, while chemical-based toxicity was taken as theoretical for concentrations of priority chemicals and effluent quality assessment based on the valid Serbian regulations. A poor correlation was found between WET and chemical-based effluent quality assessment: positive toxicity tests were found, in general, in cases where samples satisfied the requirements of mandatory effluent monitoring. Statistically insignificant correlation between the predicted and observed toxicity indicated that the presence of priority substances accounted to the overall toxicity only to a certain degree, most probably due to a rather short list of priority pollutants regularly analysed in effluents. Current monitoring requirements neglect hazards that derive from potentially present toxicants and unpredictable toxicity of complex mixtures, which led to poor correlation between the WET and chemical-based results in this study.     

A complex investigation of the extent of pollution in sediments of the Sava River. Part 1: Selected elements

The Sava River is the biggest tributary to the Danube River. As a part of the 6th FW EU project, Sava River Basin: Sustainable Use, Management and Protection of Resources (SARIB), ecological status of sediments was investigated. In order to assess the geographical distribution in sediment contamination of the Sava River, inorganic and persistent organic pollutants were analyzed in sediments at 20 selected sampling sites along the Sava River from its spring to its outfall into the Danube River. For comparability of data to other river basins the sediment fraction below 63 μm was studied. Due to complexity of the work performed, the results are published separately (“Part I: Selected elements” and “Part II: Persistent organic pollutants”). In the present study, the extent of pollution was estimated by determination of the total element concentrations and by the identification of the most hazardous highly mobile element fractions and anthropogenic inputs of elements to sediments. To assess the mobile metal fraction extraction in 0.11 mol L^???1, acetic acid was performed (first step of the Community Bureau of Reference extraction procedure), while anthropogenic inputs of elements were estimated on the basis of normalization to aluminum (Al) concentration. According to the Water Framework Directive, the following elements were investigated in sediments: cadmium (Cd), lead (Pb), nickel (Ni), and mercury (Hg). Furthermore, copper (Cu), zinc (Zn), chromium (Cr), arsenic (As), and phosphorous (P) were determined. The analyses of sediments demonstrated slightly elevated values for Hg, Cr, and Ni in industrially exposed sites (concentrations up to 0.6, 380, and 210 mg kg^???1, respectively). However, the latter two elements exist in sparingly soluble forms and therefore do not represent an environmental burden. P concentrations were found in elevated concentrations at agricultural areas and big cities (up to 1,000 mg kg^???1).     

Fungal bioremediation of the creosote-contaminated soil: influence of Pleurotus ostreatus and Irpex lacteus on polycyclic aromatic hydrocarbons removal and soil microbial community composition in the laboratory-scale study

The aim of this study was to determine the efficacy of selected basidiomycetes in the removing of polycyclic aromatic hydrocarbons (PAH) from the creosote-contaminated soil. Fungi Pleurotus ostreatus and Irpex lacteus were supplemented with creosote-contaminated (50-200 mg kg(-1) PAH) soil originating from a wood-preserving plant and incubated at 15 °C for 120 d. Either fungus degraded PAH with 4-6 aromatic rings more efficiently than the microbial community present initially in the soil. PAH removal was higher in P. ostreatus treatments (55-67%) than in I. lacteus treatments (27-36%) in general. P. ostreatus (respectively, I. lacteus) removed 86-96% (47-59%) of 2-rings PAH, 63-72% (33-45%) of 3-rings PAH, 32-49% (9-14%) of 4-rings PAH and 31-38% (11-13%) of 5-6-rings PAH. MIS (Microbial Identification System) Sherlock analysis of the bacterial community determined the presence of dominant Gram-negative bacteria (G-) Pseudomonas in the inoculated soil before the application of fungi. Complex soil microbial community was characterized by phospholipid fatty acids analysis followed by GC-MS/MS. Either fungus induced the decrease of bacterial biomass (G- bacteria in particular), but the soil microbial community was influenced by P. ostreatus in a different way than by I. lacteus. The bacterial community was stressed more by the presence of I. lacteus than P. ostreatus (as proved by the ratio of the fungal/bacterial markers and by the ratio of trans/cis mono-unsaturated fatty acids). Moreover, P. ostreatus stimulated the growth of Gram-positive bacteria (G+), especially actinobacteria and these results indicate the potential of the positive synergistic interaction of this fungus and actinobacteria in creosote biodegradation.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Spatial and seasonal characteristics of river water chemistry in the Taizi River in Northeast China

Anthropogenic activities have led to water quality deterioration in many parts of the world, especially in Northeast China. The current work investigated the spatiotemporal variations of water quality in the Taizi River by multivariate statistical analysis of data from the 67 sampling sites in the mainstream and major tributaries of the river during dry and rainy seasons. One-way analysis of variance indicated that the 20 measured variables (except pH, 5-day biological oxygen demand, permanganate index, and chloride, orthophosphate, and total phosphorus concentrations) showed significant seasonal (p?≤?0.05) and spatial (p?<?0.05) variations among the mainstream and major tributaries of the river. Hierarchical cluster analysis of data from the different seasons classified the mainstream and tributaries of the river into three clusters, namely, less, moderately, and highly polluted clusters. Factor analysis extracted five factors from data in the different seasons, which accounted for the high percentage of the total variance and reflected the integrated characteristics of water chemistry, organic pollution, phosphorous pollution, denitrification effect, and nitrogen pollution. The results indicate that river pollution in Northeast China was mainly from natural and/or anthropogenic sources, e.g., rainfall, domestic wastewater, agricultural runoff, and industrial discharge.     

Speciation of mercury in the strongly polluted sediments of the Deûle River (France)

The De?le River in Northern France experienced serious contamination from the metallurgical industry, especially from the smelter Metaleurop prior to 2003. In 2002 the surface sediments were collected from the bed of the river around 10 km above and 10 km below the smelter. Total mercury (HgT) and methylmercury (MeHg) concentrations exceeded the background value of 0.1 mg kg(-1). The average concentrations were 19.67 ± 1.02 mg kg(-1) and 10.88 ± 1.08 μg kg(-1), respectively. In 2003 the sediment core samples were collected at two different sites near the factory for survey depth profiles of Hg contamination. The concentrations of HgT and MeHg in sediment cores varied from 10.47 to 259.44 mg kg(-1) and from 3.24 to 82.61 μg kg(-1), respectively. The concentration of total mercury was significantly correlated with the methylmercury concentration in the sediment below a depth of 23.5 cm (R(2) = 0.81, p < 0.01). This may suggest that the production of MeHg is directly related to the HgT concentration. Nevertheless the MeHg/HgT ratio in the upper part of the sediment core was higher than that in the lower part. This suggests that HgT and MeHg may have been co-deposited together. However, the methylmercury production takes place in the surface sediment by microorganisms. The strong correlation observed between MeHg and acid volatile sulfides (AVS) suggests that MeHg variability is associated with the bacterial activity (presence of AVS).     

Monitoring of ozone effects on the vitality and increment of Norway spruce and European beech in the Central European forests

The ozone effect on Norway spruce (Picea abies (L) Karst.) and European beech (Fagus sylvatica L.) was studied on 48 monitoring plots in 2005-2008. These plots represent two major forest tree species stands of different ages in eight regions of the Czech Republic. The forest conditions were represented by defoliation and the annual radial increment of individual trees. The ozone exposure was assessed by using modeled values of mean annual O(3) concentration and the AOT40 index. The malondialdehyde (MDA) content of the foliage was analysed and used as an indicator of oxidative stress. The correlation analysis showed a significant relation of Norway spruce defoliation to the AOT40 exposure index, and European beech defoliation to the MDA level. The radial increment response to ozone was significant only for the European beech: (a) the correlation analysis showed its decrease with increasing AOT40; (b) the regression model showed its decrease with increasing mean annual ozone concentration only at lower altitudes (<700 m a.s.l.).     

Chemical dynamics of the Sava riverine system

Presented here is a study of the geochemical dynamics of the entire River Sava watershed, a major tributary of the River Danube which has not previously been investigated. The sampling was performed at 33 selected locations along the main channel of the stream and at its largest tributaries during three sampling seasons (fall 2005, spring 2006 and fall 2006), going from headwater locations to the mouth near the confluence with the Danube. Almost 80% of the solutes are derived from carbonate mineral weathering and represent over 50% of specific HCO(3)(-) flux normalized to unit basin area at the mouth of the Danube. Statistical analysis indicates that agricultural and industrial sources contribute significantly to increased Na(+), K(+), Cl(-), SO(4)(2-) and NO(3)(-) concentrations in tributary waters. Different processes control the water chemistry along the course of the Sava's drainage-the upper reaches are largely regulated by contributions from carbonate mineral weathering, the middle reaches are influenced by agricultural activity and biological processes related to eutrophication, while the lower reaches tend to have more pronounced parameters related to the industrial processing along with leakages from municipal sanitary systems of these higher population density areas.     

Edaphic factors affecting the vertical distribution of radionuclides in the different soil types of Belgrade, Serbia

The specific activities of natural radionuclides ((40)K, (226)Ra and (232)Th) and Chernobyl-derived (137)Cs were measured in soil profiles representing typical soil types of Belgrade (Serbia): chernozems, fluvisols, humic gleysols, eutric cambisols, vertisols and gleyic fluvisols. The influence of soil properties and content of stable elements on radionuclide distribution down the soil profiles (at 5 cm intervals up to 50 cm depth) was analysed. Correlation analysis identified associations of (40)K, (226)Ra and (137)Cs with fine-grained soil fractions. Significant positive correlations were found between (137)Cs specific activity and both organic matter content and cation exchange capacity. Saturated hydraulic conductivity and specific electrical conductivity were also positively correlated with the specific activity of (137)Cs. The strong positive correlations between (226)Ra and (232)Th specific activities and Fe and Mn indicate an association with oxides of these elements in soil. The correlations observed between (40)K and Cr, Ni, Pb and Zn and also between (137)Cs and Cd, Cr, Pb and Zn could be attributed to their common affinity for clay minerals. These results provide insight into the main factors that affect radionuclide migration in the soil, which contributes to knowledge about radionuclide behaviour in the environment and factors governing their mobility within terrestrial ecosystems.     

The determination of the extractability of selected elements from agricultural soil

Concentrations of Ag, Al, Ba, Cd, Co, Cr, Cu, Fe, K, Mn, Na, Ni, Pb, Sr, and Zn—isolated by sequential extraction steps from apple orchard soil—were analyzed by inductively coupled plasma-atomic emission spectroscopy and compared to the total amount of metal in soil determined by XRF. The extractable amount of each metal was calculated by the extraction yields of the four steps. The LODs of the different elements in all extracts ware below 3 μg/L except for Ba (steps 1 and 2), Cu (step 1), Fe (all steps), K (steps 1–3), Mn (step 2), Na (steps 1–3), Ni (step 1), Pb (steps 1 and 4), and Zn (steps 1 and 2). The highest LOD (>10 μg/L) was found for Fe, K, and Na (step 1). The recovery of all metals after four sequential extraction steps was 90–112%. The repeatability (<1.1%), the intermediate precision (<5.3%), the day-to-day reproducibility (<6.2%), and the overall uncertainty of measurement (approximately 4–8.5%) for all analyzed metals supports the choice of the method used.