Spatial differences in ambient coarse and fine particles in the Monterrey metropolitan area,Mexico: Implications for source contribution

The ambient air of the Monterrey Metropolitan Area (MMA) in Mexico frequently exhibits high levels of PM₁₀ and PM_2.5. However, no information exists on the chemical composition of coarse particles (PM_c = PM₁₀ – PM_2.5). A monitoring campaign was conducted during the summer of 2015, during which 24-hr average PM₁₀ and PM_2.5 samples were collected using high-volume filter-based instruments to chemically characterize the fine and coarse fractions of the PM. The collected samples were analyzed for anions (Cl^–, NO₃^–, SO₄^2–), cations (Na⁺, NH₄⁺, K⁺), organic carbon (OC), elemental carbon (EC), and 35 trace elements (Al to Pb). During the campaign, the average PM_2.5 concentrations did not showed significance differences among sampling sites, whereas the average PM_c concentrations did. In addition, the PM_c accounted for 75% to 90% of the PM₁₀ across the MMA. The average contribution of the main chemical species to the total mass indicated that geological material including Ca, Fe, Si, and Al (45%) and sulfates (11%) were the principal components of PM_c, whereas sulfates (54%) and organic matter (30%) were the principal components of PM_2.5. The OC-to-EC ratio for PM_c ranged from 4.4 to 13, whereas that for PM_2.5 ranged from 3.97 to 6.08. The estimated contribution of Secondary Organic Aerosol (SOA) to the total mass of organic aerosol in PM_2.5 was estimated to be around 70–80%; for PM_c, the contribution was lower (20–50%). The enrichment factors (EF) for most of the trace elements exhibited high values for PM_2.5 (EF: 10–1000) and low values for PM_c (EF: 1–10). Given the high contribution of crustal elements and the high values of EFs, PM_c is heavily influenced by soil resuspension and PM_2.5 by anthropogenic sources. Finally, the airborne particles found in the eastern region of the MMA were chemically distinguishable from those in its western region.

Implications: Concentration and chemical composition patterns of fine and coarse particles can vary significantly across the MMA. Public policy solutions have to be built based on these observations. There is clear evidence that the spatial variations in the MMA’s coarse fractions are influenced by clearly recognizable primary emission sources, while fine particles exhibit a homogeneous concentration field and a clear spatial pattern of increasing secondary contributions. Important reductions in the coarse fraction can come from primary particles’ emission controls; for fine particles, control of gaseous precursors—particularly sulfur-containing species and organic compounds—should be considered.     

Biofiltration pretreatment for reverse osmosis (RO) membrane in a water reclamation system

Biofouling control is considered as a major challenge in operating membrane systems. A lab-scale RO system was setup at a local water reclamation plant to study the feasibility of using biofiltration as a pretreatment process to control the biofouling. The biological activity in the RO system (feed, product, reject streams) was tested using the standard serial dilution plating technique. Operational parameters such as differential pressure (DP) and permeate flowrate of the system were also monitored. Effects of biofilter on AOC and DOC removals were investigated. Biofiltration was found to be a viable way of assimilable organic carbon (AOC) and dissolved organic carbon (DOC) removals, with removal efficiencies of 40-49% and 35-45% at an empty bed contact time (EBCT) of 30 min. It was also found that using the biofiltration as a pretreatment reduced the rate of biofouling. It took only about 72 h for biofouling to have a significant impact on the performance of the RO membrane, when the system was operated without using biofiltration as pretreatment. There was, however, a five times increase in operational length to more than 300 h when biofiltration was used. This study presented the suitability of the biofilter as an economical and simple way of biofouling control for RO membrane.     

A new screening measure to identify potential carbon monoxide hotspots

To demonstrate conformity of transportation projects to National Ambient Air Quality Standards in accordance with State Implementation Plans, the U.S. Environmental Protection Agency (EPA) uses intersection level of service (LOS) as one of its major criteria for screening for potential carbon monoxide (CO) hotspots. Although intersection LOS is a measure of traffic volume, signal timing, and related congestion and delay, the assigned level reflects only the computed averaged stopped delay (ASD) per vehicle at the intersection. Thus, intersections can often operate at the same LOS but produce vastly different levels of predicted CO concentrations. For example, a two-lane approach operating at LOS D will produce very different levels of CO than a five-lane approach also operating at LOS D. This study explores the effectiveness of the LOS D criterion as a screen for identifying potential CO hotspots. The study results indicate that LOS is a poor predictor of potential CO hotspots when compared to results generated with the EPA-recommended micro-scale model CAL3QHCr. To more consistently screen out those intersections that will not be identified as CO hotspots using the micro-scale models, a new criterion, equivalent red-time vehicles (ERTV), is introduced. The modeling results using ERTV suggest that it is a more robust measure for identifying potential CO hotspots, and conversely, screening out those intersections that are not likely to be identified as hotspots using micro-scale simulation results.     

Interactive effects of temperature and heavy metal stress on the growth and some biochemical compounds in wheat seedlings

In this study, the interaction between temperature and heavy metal stress was investigated in two wheat varieties (Triticum aestivum L. cv. Gerek-79 and Bolal-2973). Effects of different concentrations of lead and cadmium (0, 50, 100, 250, 500 mg l(-1)) simultaneously applied at various temperatures (8/4, 25/18, 35/26 degrees C day/night) to the seedlings were detected by measuring changes in the plant length, percentage of dry weight, chlorophyll (a, b, a/b), total soluble phenolics, and free proline. At the high cadmium concentrations, significant changes occurred in plant length and in the amounts of dry weight, chlorophyll, total soluble phenolics, and free proline. Significant differences were not observed in the parameters examined for the lead treatments. These data indicated that heavy metal toxicity increases in parallel with temperature. In addition, lead did not have any toxic effects on plants in sand-perlite mixture at 500 mg l(-1), whereas cadmium showed toxic effect even at such low concentrations as 50 mg l(-1).     

14C-dimethoate residues in olive oil during oil processing

An olive tree was treated twice in the field with 14C-dimethoate (237.7 muCi, 2.4 g) and 14C residues were determined in the olive fruits at harvest. The fruits were crushed and pressed to extract the crude oil, then refined by neutralization, bleaching and deodorization. The crude oil contained 14.1% of the total 14C in the olive fruits. Neutralization resulted in a reduction of 14C by about 50% of the total 14C residues in oil. Bleaching and deodorization processes further reduced the 14C residues and the refined oil contained 31.6% (which corresponds to 4.4% of 14C residues of the total 14C in olive fruits) of the total 14C in the crude oil. Industrially extracted crude oil was fortified with 14C-dimethoate at 1.8 mg kg-1 (0.02 muCi) level and subjected to the same refining process. A sharp decrease in the amount of 14C was observed by neutralization and the amount of 14C remaining in the refined oil was about 7.3% of the total 14C in the crude fortified oil. The data suggest that the 14C residues in the aged and the fortified oil amples were not of the same nature. The terminal 14C residue in the refined oil obtained from the field experiment did not contain dimethoate and/or its oxon.     

Trace analysis of dissolved polychlorinated organic compounds in the water of the Yangtse River (Nanjing, China)

Eighteen organochlorine contaminants from the water samples of the Yangtse River have been qualitatively and quantitatively analyzed. The analysis of polychlorinated organic compounds (PCOCs) extracted by C18 Solid Phase Extract (SPE) was performed using HP6890 gas chromatograph coupled by ECD detector. The analytical results demonstrate that the analytical methods are reliable based on the fact that most of the recoveries for the targeted compounds are 60-90%. Most of the concerned contaminants, i.e. chlorinated pesticides and PCBs were found in the water samples of the Yangtse River, but their concentration was very low, <2.97 ng l(-1), which is far less than 1 microg l(-1)--the standard of drinking water of China. It is apparent that the PCOCs were in high concentration during the dry season, and in low concentration during the rainy season. The situation of PCOCs contamination in the water of the Yangtse River in 1999 was greatly improved in comparison with 10 years ago.     

Effects of leachate recirculation on biogas production from landfill co-disposal of municipal solid waste,sewage sludge and marine sediment

Leachate recirculation is an emerging technology associated with the management of landfill. The impact of leachate recirculation on the co-disposal of three major wastes (municipal solid waste, sewage sludge and sediment dredgings) was investigated using a laboratory column study. Chemical parameters (pH, COD, ammoniacal-N, total-P) and gas production (total gas volume, production rates and concentrations of CH4 and CO2) were monitored for 11 weeks. Leachate recirculation reduced waste-stabilization time and was effective in enhancing gas production and improving leachate quality, especially in terms of COD. The results also indicated that leachate recirculation could maximize the efficiency and waste volume reduction rate of landfill sites.     

Meteorological effects on the evolution of high ozone episodes in the greater Seoul area

Three high O3 episodes--7 days in 1992 (July 3-July 9), 9 days in 1994 (July 21-July 29), and another 3 days in 1994 (August 22-August 24)--were selected on the basis of morning (7:00 a.m.-10:00 a.m.) average wind direction and speed and daily maximum O3 concentrations in the greater Seoul, Korea, of 1990-1997. To better understand their characteristics and life cycles, surface data from the Seoul Weather Station (SWS) and surface and 850-hPa wind field data covering northeast Asia around the Korean Peninsula were used for the analysis. In the July 1992 episode, westerly winds were most frequent as a result of the influence of a high-pressure system west of the Korean Peninsula behind a trough. In contrast, in the July 1994 episode, easterly winds were most frequent as a result of the effect of a typhoon moving north from the south of Japan. Despite different prevailing wind directions, the peak O3 concentrations for each episode occurred when a sea/land breeze developed in association with weak synoptic forcing. The August 1994 episode, which was selected as being representative of calm conditions, was another typical example in which a well-developed     

Comparison of quantitation of polychlorinated dibenzodioxins and polychlorinated dibenzofurans in complex environmental samples by high resolution gas chromatography with flame ionization, electron capture and mass spectrometric detection

A complete separation of PDDD and PCDF from a complex sample matrix by a two-step HPLC clean-up procedure shows the feasibility of analysis of PCDD and PCDF using less expensive instruments. This is demonstrated by a comparison of quantitative results of PCDD and PCDF in a complex flyash sample analyzed using GC/FID, GC/ECD, and GC/MSD.