Growth, respiration and nitrogen content in needles of Scots pine exposed to elevated ozone and carbon dioxide in the field

Single Scots pine (Pinus sylvestris L.) trees, aged 30 years, were grown in open-top chambers and exposed to two atmospheric concentrations of ozone (O3; ambient and elevation) and carbon dioxide (CO2) as single variables or in combination for 3 years (1994-1996). Needle growth, respiration and nitrogen content were measured simultaneously over the period of needle expansion. Compared to ambient treatment (33 nmol mol(-1) O3 and 350 micromol mol(-1) CO2) doubled ambient O3 (69 nmol mol(-1)) significantly reduced the specific growth rates (SGRs) of the needles in the early stage of needle expansion and needle nitrogen concentration (N1) in the late stage, but increased apparent respiration rates (ARRs) in the late stage. Doubled ambient CO2 (about 650 micromol mol(-1)) significantly increased maximum SGR but reduced ARR and N1 in the late stage of needle expansion. The changes in ARR induced by the different treatments may be associated with treatment-induced changes in needle growth, metabolic activities and turnover of nitrogenous compounds. When ARR was partitioned into its two functional components, growth and maintenance respiration, the results showed that neither doubled ambient O3 nor doubled ambient CO2 influenced the growth respiration coefficients (Rg). However, doubled ambient O3 significantly increased the maintenance respiration coefficients (Rm) regardless of the needle development stage, while doubled ambient CO2 significantly reduced Rm only in the late stage of needle expansion. The increase in Rm under doubled ambient O3 conditions appeared to be related to an increase in metabolic activities, whereas the decrease in Rm under doubled ambient CO2 conditions may be attributed to the reduced N1 and turnover rate of nitrogenous compounds per unit. The combination of elevated O3 and CO2 had very similar effects on growth, respiration and N1 to doubled ambient O3 alone, but the interactive mechanism of the two gases is still not clear.     

Metal accumulation in tissues of seabirds from Chaun, northeast Siberia, Russia

Concentrations of four essential elements (Fe, Mn, Zn, and Cu) and two toxic metals (Cd and Hg) were determined in selected tissues of 11 seabird species collected in Chaun, northeast Siberia. In oldsquaw, arctic tern and herring gull, zinc concentrations were correlated with Cd concentrations. Cadmium concentrations in all the species were highest in kidney and Hg in liver. Cd levels in the liver and kidney of herring gulls were higher than those observed from other breeding areas. Similarly, Hg concentrations were also high in the liver of herring gull. High concentrations of Cd and Hg found in some birds from Chaun might have arisen from exposure on migration.     

Relationship between copper speciation in sediments and bioaccumulation by marine bivalves of Taiwan

This paper evaluates the relationships between copper species in sediments and accumulation by the purple clam (Hiatula diphos) and venus clam (Gomphina aeguilatera) collected from the field and culture (aquaculture) ponds in the polluted coastal area of Lukang, Taiwan. Sediment was sampled along with the molluscs, including oysters (Crassostrea gigas), purple clams (Hiatula diphos), rock-shells (Thais clavigera), venus clams (Gomphina aeguilatera), and hard clams (Meretrix lusoria), from two unique environments of Lukang during the period from August 1993 to July 1994. The data indicate that the total copper concentrations in sediments from culture ponds (185 microg g(-1)) was higher than those of the field (44.0 microg g(-1)). Copper species in sediments were analyzed by a sequential leaching technique. Results show that concentrations of various copper species in the sediments are in the range of 1.14 +/- 0.59 to 13.2 +/- 22.4 microg g(-1) and 0.36 +/- 0.24 to 133 +/- 36.7 microg g(-1) for the two environments, respectively. Also the exchangeable copper in sediment from culture ponds was 15 times higher than that from the field. In addition, the sum of exchangeable and copper carbonates had the highest percentages of copper in both the pond sediment (86.6 %) and the field sediment (50.7 %). Maximum copper concentrations (309 +/- 35.1 microg g(-1)) in oysters were much higher than those in the other benthic organisms by about 4-127 times. Similarly, the data also showed that copper concentrations in Thais clavigera were 12-32 times higher than those in other benthic organisms. Copper concentrations in various benthic organisms differed significantly (p < 0.05) from that in Thais clavigera. This capacity makes Thais clavigera a potential candidate for monitoring copper in marine sediments. In terms of copper species, the best correlation was generally obtained between copper carbonates in sediments and copper concentrations in Hiatula diphos (r = 0.886*). A strong multiple regression correlation (p < 0.05, r2 = 0.7894) also indicates that the copper carbonates may dominate as the available form of copper to Hiatula diphos from various environments in the Lukang coastal area under natural physicochemical conditions.     

Assessing ozone-precursor relationships based on a smog production model and ambient data

A semi-empirical model, Johnson's smog production model (SPM), which relates precursor emissions to ozone levels and estimates the relative effectiveness of volatile organic compounds (VOC) and NOx emission controls, has been evaluated and a modified version of SPM has been introduced. Both versions have been applied to routine data from 1989-1991 in five areas in the United States. In particular, extent parameters, which reveal the relative merit of VOC and NOx controls in reducing high ozone levels, have been calculated. Preliminary applications of SPM reveal interesting features with respect to VOC vs. NOx controls in reducing high ozone levels. For hourly data with ozone > or =0.08 ppm, distributions of extent parameters resulting from the modified SPM show the effectiveness of VOC controls at more monitoring sites than those from Johnson's SPM; however, relative features between the two versions are similar. On the other hand, for hourly data with ozone > or =0.12 ppm, the two SPM versions show very similar relative effectiveness of VOC and NOx controls with chosen values of model parameters. To improve the credibility of SPM, the range of validity of relationships between maximum smog produced or maximum ozone and NOx concentrations must be determined, and the parameters in these relationships must be better determined for typical VOC mixtures. Another essential parameter, which determines the fractional loss of NOy (NO and its oxidation products) from the gas phase must be better determined.     

An operational assessment of the application of the relative reduction factors in the demonstration of attainment of the 8-hr ozone National Ambient Air Quality Standard

The U.S. Environmental Protection Agency in 1997 revised the 1-hr ozone (O3) National Ambient Air Quality Standard (NAAQS) to one based on an 8-hr average, resulting in potential nonattainment status for substantial portions of the eastern United States. The regulatory process provides for the development of a state implementation plan that includes a demonstration that the projected future O3 concentrations will be at or below the NAAQS based on photochemical modeling and analytical techniques. In this study, four photochemical modeling systems, based on two photochemical models, Community Model for Air Quality and the Comprehensive Air Quality Model with extensions, and two emissions processing models, Sparse Matrix Optimization Kernel for Emissions and Emissions Modeling System, were applied to the eastern United States, with emphasis on the northeastern Ozone Transport Region in terms of their response to oxides of nitrogen and volatile organic carbon-focused controls on the estimated design values. With the 8-hr O3 NAAQS set as a bright-line test, it was found that a given area could be termed as being in or out of attainment of the NAAQS depending upon the modeling system. This suggests the need to provide an estimate of model-to-model uncertainty in the relative reduction factor (RRF) for a better understanding of the uncertainty in projecting the status of an area's attainment. Results indicate that the model-to-model differences considered in this study introduce     

Rapid reductive destruction of hazardous organic compounds by nanoscale Fe0

Fe0-mediated reductive destruction of hazardous organic compounds such as chlorinated organic compounds (COCs) and nitroaromatic compounds (NACs) in the aqueous phase is one of the latest innovative technologies. In this paper, rapid reductive degradation of COCs and NACs by synthesized nanoscale Fe0 in anaerobic batch systems was presented. The nanoscale Fe0, characterized by high specific surface area and high reactivity, rapidly transformed trichloroethylene (TCE), chloroform (CF), nitrobenzene (NB), nitrotoluene (NT), dinitrobenzene (DNB) and dinitrotoluene (DNT) under ambient conditions, which results in complete disappearance of the parent compounds from the aqueous phase within a few minutes. GC analysis reported that the main products of the dechlorination of TCE and CF were ethane and methane as well as that most of the nitro groups in NACs were reductively transformed to amine groups. These results suggest that the rapid reductive destruction by nanoscale Fe0 is potentially a viable in situ or aboveground treatment of groundwater contaminated with hazardous organic compounds including COCs and NACs.     

Performance of different microalgal species in removing nickel and zinc from industrial wastewater

A series of batch experiments was conducted to compare the ability of 11 microalgal species of the same cell density in removing nickel (Ni) and zinc (Zn) from synthetic wastewater. These included Chlorella vulgaris (commercially available), Chlorella sorokiniana and Scenedesmus quadricauda (isolates from polluted water of Wuhan, China), and eight different isolates from Hong Kong. The Wuhan isolate of Scenedesmus removed most Ni, probably due to its large biomass. Nickel concentration was reduced from an initial 30 to 0.9 mg/l after 5 min (97% Ni removal), and further declined to 0.4 mg/l after 90 min of treatment. In wastewater containing 30 mg/l Ni and 30 mg/l Zn, more than 98%, Ni and Zn were removed simultaneously at the end of 5 min treatment, indicating that the presence of Zn in wastewater did not affect Ni removal by this Scenedesmus isolate. The second most effective species for Ni removal was an isolate, tentatively identified as Chlorella miniata, Ni concentration was reduced to 10 mg/l after 90 min, and was only slightly interfered by the presence of Zn. In terms of metal removal per unit biomass or unit surface area of algal cells, C. miniata was the best species in removing Ni and Zn. At the other extreme, one Hong Kong isolate (Synechocystis sp.) did not remove any Ni and only achieved 40% Zn removal. Performance of the other isolates was comparable with the commercial C. vulgaris, less than 50% Ni was removed after 5 h of treatment and Ni removal was significantly reduced by the presence of Zn. All algae tested were found to be viable, showing these 11 species could tolerate a mixture of 30 mg/l Ni and 30 mg/l Zn in wastewater.     

Heavy metal concentrations in green-lipped mussels collected from Tolo Harbour and markets in Hong Kong and Shenzhen

Green-lipped mussels, Perna viridis, were collected from Kat O, Yim Tin Tsai, Ma Liu Shui and Tap Mun around Tolo Harbour and six local markets in Hong Kong (Aberdeen, Shau Kei Wan, Kowloon City, Mongkok, Yuen Long) and Shenzhen (Dongmun) between July 1994 and February 1995 and analysed for cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn). The metal concentrations of mussels collected from the study sites were Cd (0.45-1.44 microg/g), Cr (0.82-4.89 microg/g), Cu (6.02-23.99 microg/g), Ni (3.25-6.87 microg/g), Pb (2.02-4.36 microg/g) and Zn (90-135 microg/g), while those from the markets were Cd (0.27-1.44 microg/g), Cr (1.09-3.30 microg/g), Cu (9.05-17.8 microg/g), Ni (2.44-5.25 microg/g), Pb (1.17-5 microg/g) and Zn (51-103 microg/g). The metal concentrations were below the maximum permissible levels set by the Hong Kong Government. In addition, seasonal variation of metal accumulation in mussels was investigated in Yim Tin Tsai and Ma Liu Shui and a reduction in the total heavy metal concentrations during winter was noted. The non-carcinogenic hazard index of mussels collected from Tolo Harbour and from Hong Kong markets was between 0.46 and 1.36 compared with those from Shenzhen markets (0.85-1.46), which indicated a low but possible risk in consuming the mussels.     

Zinc-copper interaction affecting plant growth on a metal-contaminated soil

In order to assess the effects of metal interactions on plant growth, a greenhouse experiment was conducted, in which spring barley was grown for 48 days in a soil to which cadmium, copper, lead and zinc were added singly and in combination. Plant growth was measured as shoot and root dry matter production. At the end of the experiment the plant material was analysed for metal uptake and the soil was extracted with CaCl(2) solution, to measure the plant-available metal content. The most consistent effect on plant growth was an interaction between copper and zinc, which was also important in determining uptake of these metals and the amounts extractable with CaCl(2) solution. An analysis of the underlying mechanism led to the conclusion that the growth of barley was controlled principally by the amount of plant-available zinc, which depended on the amounts of both added zinc and added copper. The effect of the added copper was to increase the toxicity of the added zinc.     

Elevated levels of lead and other metals in roadside soil and grass and their use to monitor aerial metal depositions in Hong Kong

The Pb, Cu, Zn, Fe, Mn and Cd contents in roadside soils and grass from 36 sites on the Island of Hong Kong were determined by atomic absorption spectrometry. Results showed that both soil and grass contained elevated levels of the metals studied. Linear regression analysis between the logarithmic concentration of the metals in the samples and the logarithmic traffic volume of the sites revealed that, apart from Cd in soil, the two were strongly related (variance ratios' P values <0.001), thus indicating that the motor vehicle forms a major source of these metals in the roadside. The regional distribution of Pb and Cu in roadside soil and grass (presented in maps herein) shows high levels of contamination occurring mainly in the highly urbanised northern part of the Island where most of the traffic is concentrated. Apparently, both soil and grass could be utilised to reflect the extent of aerial deposition of metals in the roadside.