Cost effective management of stochastic coastal water pollution

This study develops a theoretical tool for investigating the impact on cost effective coastal water management from explicit treatment of: coastal pollutant transports, stochastic pollutant transports in the catchment areas, and wetlands as a pollutant abatement option. It is applied to a relatively well investigated estuary, Himmerfjärden, south of the Swedish capital, Stockholm. The theoretical results indicate that all three factors influence cost effective allocation of measures and associated design of economic instruments. The consideration of stochastic pollutant transports will increase costs, but the direction of influence of the other two factors cannot be determined without empirical support. The application to nitrogen transport in Himmerfjärden shows that, for target nitrogen reductions given in terms of a percentage of pre-abatement loads, the inclusion of coastal transports in the cost calculations lowers the estimated total costs for targets interpreted in terms of nitrogen loads to the marine water. The alternative investigated target interpretation was in terms of nitrogen loads to coastal waters. Depending on the ability of wetlands to abate nitrogen and to change the variance in pollutant load to the coastal recipients, costs are either increased or decreased as compared to when wetlands are excluded as nitrogen abatement options.     

Solid fuels in chemical-looping combustion

The feasibility of using a number of different solid fuels in chemical-looping combustion (CLC) has been investigated. A laboratory fluidized bed reactor system for solid fuel, simulating a chemical-looping combustion system by exposing the sample to alternating reducing and oxidizing conditions, was used. In each reducing phase 0.2 g of fuel in the size range 180–250 μm was added to the reactor containing 40 g oxygen carrier of size 125–180 μm. Two different oxygen carriers were tested, a synthetic particle of 60% active material of Fe₂O₃ and 40% MgAl₂O₄ and a particle consisting of the natural mineral ilmenite. Effect of steam content in the fluidizing gas of the reactor was investigated as well as effect of temperature. A number of experiments were also made to investigate the rate of conversion of the different fuels in a CLC system. A high dependency on steam content in the fluidizing gas as well as temperature was shown. The fraction of volatiles in the fuel was also found to be important. Furthermore the presence of an oxygen carrier was shown to enhance the conversion rate of the intermediate gasification reaction. At 950 °C and with 50% steam the time needed to achieve 95% conversion of fuel particles with a diameter of 0.125–0.18 mm ranged between 4 and 15 min depending on the fuel, while 80% conversion was reached within 2–10 min. In almost all cases the synthetic Fe₂O₃ particle with 40% MgAl₂O₄ and the mineral ilmenite showed similar results with the different fuels.     

Distribution of some organochlorine compounds in pine needles from Central and Northern Europe

Levels of selected organochlorine compounds in pine needles were measured in two sampling series. The first series collected in 1989 covered Southern Germany to Northern Scandinavia, and the second collected in 1990 covered Czechoslovakia to Estonia. The levels of alpha-hexachlorocyclohexane (alpha-HCH) and hexachlorobenzene (HCB) were relatively uniform throughout Europe, while the levels of gamma-hexachlorocyclohexane (gamma-HCH) and the DDT group show higher levels in the southern parts of the investigated area. The deposition patterns of all compounds except alpha-HCH indicate a dependence on fresh release from diffuse or point sources rather than global fractionation. The analytes accumulate in the needles until senescence starts and, generally, the oldest needles have the highest concentrations. The accumulation rate of the analytes in mountain pine needles is about half that of Scots pine needles indicating the importance of species differences.     

Survival of weed seeds and animal parasites as affected by anaerobic digestion at meso- and thermophilic conditions

Anaerobic digestion of residual materials from animals and crops offers an opportunity to simultaneously produce bioenergy and plant fertilizers at single farms and in farm communities where input substrate materials and resulting digested residues are shared among member farms. A surplus benefit from this practice may be the suppressing of propagules from harmful biological pests like weeds and animal pathogens (e.g. parasites). In the present work, batch experiments were performed, where survival of seeds of seven species of weeds and non-embryonated eggs of the large roundworm of pigs, Ascaris suum, was assessed under conditions similar to biogas plants managed at meso- (37 °C) and thermophilic (55 °C) conditions. Cattle manure was used as digestion substrate and experimental units were sampled destructively over time. Regarding weed seeds, the effect of thermophilic conditions (55 °C) was very clear as complete mortality, irrespective of weed species, was reached after less than 2 days. At mesophilic conditions, seeds of Avena fatua, Sinapsis arvensis, Solidago canadensis had completely lost germination ability, while Brassica napus, Fallopia convolvulus and Amzinckia micrantha still maintained low levels (～1%) of germination ability after 1 week. Chenopodium album was the only weed species which survived 1 week at substantial levels (7%) although after 11 d germination ability was totally lost. Similarly, at 55 °C, no Ascaris eggs survived more than 3 h of incubation. Incubation at 37 °C did not affect egg survival during the first 48 h and it took up to 10 days before total elimination was reached. In general, anaerobic digestion in biogas plants seems an efficient way (thermophilic more efficient than mesophilic) to treat organic farm wastes in a way that suppresses animal parasites and weeds so that the digestates can be applied without risking spread of these pests.     

Characterization of Shredder Residues generated and deposited in Denmark

This study presents a detailed characterization of Shredder residues (SR) generated and deposited in Denmark from 1990 to 2010. It represents approximately 85% of total Danish SR. A comprehensive sampling, size fractionation and chemical analysis was carried out on entire samples as well as on each individual size fraction. All significant elemental contents except oxygen were analyzed. The unexplained “balance” was subsequently explained by oxygen content in metal oxides, carbonates, sulphates and in organics, mainly cellulose. Using mass and calorific balance approaches, it was possible to balance the composition and, thereby, estimate the degree of oxidation of elements including metals. This revealed that larger fractions (>10 mm, 10–4 mm, 4–1 mm) contain significant amount of valuable free metals for recovery. The fractionation revealed that the >10 mm coarse fraction was the largest amount of SR being 35–40% (w/w) with a metal content constituting about 4–9% of the total SR by weight and the <1 mm fine fraction constituted 27–37% (w/w) of the total weight. The lower heat value (LHV) of SR samples over different time periods (1990–2010) was between 7 and 17 MJ/kg, declining with decreasing particle size. The SR composition is greatly dependent on the applied shredding and post shredding processes at the shredding plants causing some variations. There are uncertainties related to sampling and preparation of samples for analyses due to its heterogeneous nature and uncertainties in the chemical analyses results (≈15–25%). This exhaustive characterization is believed to constitute hitherto the best data platform for assessing potential value and feasibility of further resource recovery from SR.     

Evaluation of Monte Carlo-based calibrations of HPGe detectors for in situ gamma-ray spectrometry

The aim of this work was to evaluate the use of Monte Carlo-based calibrations for in situ gamma-ray spectrometry. We have performed in situ measurements at five different sites in Sweden using HPGe detectors to determine ground deposition activity levels of ¹³⁷Cs from the 1986 Chernobyl accident. Monte Carlo-calculated efficiency calibration factors were compared with corresponding values calculated using a more traditional semi-empirical method. In addition, results for the activity ground deposition were also compared with activity densities found in soil samples. In order to facilitate meaningful comparisons between the different types of results, the combined standard uncertainty of in situ measurements was assessed for both calibration methods. Good agreement, both between the two calibration methods, and between in situ measurements and soil samples, was found at all five sites. Uncertainties in in situ measurements for the given measurement conditions, about 20 years after the fallout occurred, were found to be in the range 15–20% (with a coverage factor k = 1, i.e. with a confidence interval of about 68%).