青稞β-1,3-葡聚糖酶Ⅱ基因启动子的克隆分析及表达载体的构建

根据本实验室克隆并公布的藏青稞β-1,3-葡聚糖酶Ⅱ(BGH Ⅱ)基因序列,以藏青稞QB09基因组DNA为模板,构建DNA步移文库,并通过步移技术克隆出BGH Ⅱ起始密码子上游调控序列BGHP.鉴定和分析表明,BGHP具备大多数高等植物启动子的保守元件,预测它对BGHⅡ基因的表达具有一定的作用.为鉴定BGHⅡ基因的基本启动子元件,将基因5’侧翼序列做缺失片段分析,利用PCR方法从BGHP中得到3个不同大小两端带有HindⅢ、BamH Ⅰ酶切位点的片段BGHP1、BGHP2和BGHP3,定向插入载体pMGFP4(pBI221改建,报告基因为GFP)中,取代原有的CaMV35S启动子,构建了由驱动报告基因GFP的植物表达载体BGHPV1、BGHPV2和BGHPV3,用于大麦的遗传转化,为进一步研究其功能奠定了基础.图5表1参15     

Chemical speciation and anthropogenic sources of ambient volatile organic compounds (VOCs) during summer in Beijing, 2004

Volatile organic compounds (VOCs) were measured at six sites in Beijing in August, 2004. Up to 148 VOC species, including C₃ to C₁₂ alkanes, C₃ to C₁₁ alkenes, C₆ to C₁₂ aromatics, and halogenated hydrocarbons, were quantified. Although the concentrations differed at the sites, the chemical compositions were similar, except for the Tongzhou site where aromatics were significantly high in the air. Based on the source profiles measured from previous studies, the source apportionment of ambient VOCs was preformed by deploying the chemical mass balance (CMB) model. The results show that urban VOCs are predominant from mobile source emissions, which contribute more than 50% of the VOCs (in mass concentrations) to ambient air at most sites. Other important sources are gasoline evaporation, painting, and solvents. The exception is at the Tongzhou site where vehicle exhaust, painting, and solvents have about equal contribution, around 35% of the ambient VOC concentration. As the receptor model is not valid for deriving the sources of reactive species, such as isoprene and 1,3-butadiene, other methodologies need to be further explored.     

高炉煤气袋式除尘系统的问题及改进

钢铁生产会产生大量的煤气.袋式除尘是高炉煤气除尘的发展方向.对重钢高炉煤气袋式除尘系统问题的分析研究结果表明:要使钢铁企业煤气除尘系统更高效、低耗、环保的运行,必须采用灵活、可操作性强的煤气温度调节手段,选择适宜的阀门和喷吹控制方式,优化除尘灰的保温模式和卸灰设备的结构等.     

全氟辛烷磺化物及其环境问题

全氟辛烷磺化物(PFOS)是全氟化合物(PFCS)的代表物,以PFOS为原料可以生产许多用途广泛的PFOS相关物质,并且在环境中都能降解生成PFOS.PFOS是一种新型的持久性有机污染物(POPs),已经成为环境科学研究的热点问题.主要从物理化学性质、毒性、环境及人体暴露水平等方面对PFOS进行了综述,并将中国有关的现有数据与其他国家进行了比较.研究表明,中国人体、水体均存在着大范围的以PFOS为主的PFCS污染.     

Microbial kinetic analysis of three different types of EBNR process

The disadvantages of developed biological nutrient removal (BNR) processes (additional energy for liquid circulation and addition of external carbon substrate for denitrification in anoxic zones) were improved by reconfiguring the process into (1) an anaerobic zone followed by multiple stages of aerobic-anoxic zones (TNCU3 process) or (2) anaerobic, oxic, anoxic, oxic zones in sequence (TNCU2 process). These two pilot plants were operated at a recycling sludge ratio of 0.5 without internal recycle of nitrified supernatant. The sludge retention time was maintained at 10 d. The main objective of this study is to analyze the kinetics of different microorganisms in these two processes and A2O process by using the Activated Sludge Model No. 2d. The effective removal efficiency of carbon, total phosphorus and total nitrogen at 87-98%, 92-100% and 63-80%, respectively, were achieved in the testing runs. According to model simulations, the microbial kinetics in the TNCU3 and TNCU2 processes would be affected by different operations. When the step feeding strategy was adopted, the HRT was longer due to the less influent flowrate in the front stages and the microbes would grow in quantities by about 6% in the aerobic reactors. In the followed anoxic reactors, the microbes would decrease in quantities by about 12% due to the dilution effect. The dilution effects in TNCU3 and TNCU2 processes did not take place in A2O process because the recycling mixed liquid from the aerobic reactor to the anoxic reactor still contained particulate components. The XH, XPAO, and XAUT concentrations in the effluent of the last tank were lower when the step-feeding mode was adopted. The TNCU3 and TNCU2 processes could be operated efficiently without nitrified liquid circulation and addition of external carbon substrate for denitrification.     

炼焦废水生化处理技术研究进展

综述了近几年来炼焦废水及炼焦废水中主要成分(酚类、氨类物质、氰化物)的生化处理方法.其中废水中酚类物质的去除方法有投加有效菌、超滤法等;去除氨类物质的方法有A2/O法、纳滤法和反渗透法等;去除氰化物的方法有生物法和化学法等.综合处理炼焦废水的方法有双层生物膜法、生物脱氮法和含铁活性污泥处理技术等.     

运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计

二次风口的合理布设是实现炉膛内气体混合均匀、反应完全的有效措施之一，运用CFD技术进行二段往复炉排焚烧炉二次风口的辅助设计，借助PHOENICS软件模拟二次风口对炉内流场的影响。通过模拟发现，二次风口的布设可明显提高烟气的湍流程度．前后墙各设一排直径为0．04m的二次风口可以实现最佳的炉膛流场工况。     

絮凝体分形维数投药控制研究

依据分形理论，通过先进的图像分析处理技术，实现了对絮凝体分形维数的联机在线监测，试验证实分形维数可以很好地反映絮凝程度及其混凝处理效果，通过建立的混凝剂投加量、分形维数及沉后水浊度三者间的模糊控制模型，最终实现了对混凝剂投加量的自动控制与调节。     

小型磷化废水处理成套设备的开发与设计

考虑到机械行业磷化废水的特点 ,利用混凝沉淀与结晶除磷的原理 ,设计成 2t h的磷化废水处理成套设备     

生物脱氮除磷工艺的研究进展

为遏制水体富营养化的恶化，氮，磷的排放标准日趋严格，生脱氮除磷工艺能有效地去除水体中的氮、磷。通过对现有的生物脱氮除磷传统工艺和新近发展工艺的介绍和分析，指出经济、高效、低能耗是其发展的方向，同时认为今后应加强对生物脱氮除磷机理更深入的研究，大力开发技术成熟，高效经济又符合我国国情的新工艺。