Health implications of radon distribution in living rooms and bedrooms in U.K. dwellings--a case study in Northamptonshire

Environmental radon exposure of residents of domestic premises in the United Kingdom (UK) and elsewhere in Europe is estimated on the basis of the measured radon concentrations in, and the relative occupancies of, the principal living room and bedroom. While studies on radon concentration variability in the individual units in apartment blocks in various countries have been described, little data has been reported on variability in two-storey single-family dwellings, and the majority of extant studies consolidate living room and bedroom data early in the analysis. To investigate this further, detailed analysis was made of radon concentration data from a set of thirty-four homes situated in areas of Northamptonshire known to exhibit high radon levels. All homes were of typical UK construction of brick/block/stone walls under a pitched tile/slate roof. Approximately 50% of the sample were detached houses, the remainder being semi-detached (duplex) or terraced (row-house). Around 25% of the sample possessed cellars, while 12% were single-storey dwellings (bungalows), reflecting the typical incidence of this type of dwelling in England. In the two-storey homes, all monitored bedrooms were on the upper floor. Distribution of the ratios of bedroom/living room radon concentrations (BR/LR ratio) in individual properties was left-skewed (mean 0.67, median 0.73, range 0.05-1.05) with a tail extending to just above 1.0. The mean is consistent with the outcome of earlier extensive studies in England, while the variability depends principally on the characteristics of the property, and not on seasonal factors. In a small set of homes, the BR/LR ratio was anomalously low, (mean 0.3). BR/LR ratios in single-storey homes clustered around a value of 1.0, indicating that house design, rather than lifestyle, is the dominant factor in determining bedroom radon concentrations. Homes with higher mean annual radon concentrations showed lower BR/LR ratios, supporting our proposal that, in some homes, radon emanation from building materials may comprise a significant component of the overall radon level.     

Stable and radioiodine concentrations in cow milk: dependence on iodine intake

For testing the potential use of stable iodine as a countermeasure to reduce radioiodine transfer to milk, concentrations of stable iodine and radioiodine in the milk of dairy cows fed different amounts of stable iodine were measured. The results indicated that, compared to a normal average stable iodine intake of about 20 mg d(-1) for cows, low iodine dietary intake (<1.5 mg d(-1)) resulted in a reduced transfer of radioiodine to milk by 25%, varying stable iodine intakes in the range of 10-500 mg d(-1) did have no significant effect; at stable iodine intake rates above 1000 mg I d(-1), a reduction by a factor of approximately two was achieved. The high dietary iodine intakes--being about 100 times the normal iodine supply--required to reduce the radioiodine transfer significantly, will result in stable iodine concentrations in milk in excess of advised or legal limits for human consumption. Nevertheless, the provision of stable iodine via the milk pathway might be considered for emergency situations when stable iodine is used as a preventative measure for dose reduction to humans.     

The value of Seasonal Correction Factors in assessing the health risk from domestic radon: a case study in Northamptonshire, UK

Following an intensive survey of domestic radon levels in the United Kingdom (UK), the former National Radiological Protection Board (NRPB), now the Radiation Protection Division of the Health Protection Agency (HPA-RPD), established a measurement protocol and promulgated Seasonal Correction Factors applicable to the country as a whole. Radon levels in the domestic built environment are assumed to vary systematically and repeatably during the year, being generally higher in winter. The Seasonal Correction Factors therefore comprise a series of numerical multipliers, which convert a 1-month or 3-month radon concentration measurement, commencing in any month of the year, to an effective annual mean radon concentration. In a recent project undertaken to assess the utility of short-term exposures in quantifying domestic radon levels, a comparative assessment of a number of integrating detector types was undertaken, with radon levels in 34 houses on common geology monitored over a 12-month period using dose-integrating track-etch detectors exposed in pairs (one upstairs, one downstairs) at 1-month and 3-month resolution. Seasonal variability of radon concentrations departed significantly from that expected on the basis of the HPA-RPD Seasonal Correction Factor set, with year-end discontinuities at both 1-month and 3-month measurement resolutions. Following this study, monitoring with electrets was continued in four properties, with weekly radon concentration data now available for a total duration in excess of three and a half years. Analysis of this data has permitted the derivation of reliable local Seasonal Correction Factors. Overall, these are significantly lower than those recommended by HPA-RPD, but are comparable with other results from the UK and from abroad, particularly those that recognise geological diversity and are consequently prepared on a regional rather than a national basis. This finding calls into question the validity of using nationally aggregated Seasonal Correction Factors, especially for shorter exposures, and the universal applicability of these corrections is discussed in detail.     

Assessment of ecological risk from bioaccumulation of PCDD/Fs and dioxin-like PCBs in a coastal lagoon

The ecological risk posed by dioxin-like PCBs and PCDD/Fs congeners mixtures in five organisms representative of the food web of the lagoon of Venice (Italy) was estimated by applying the US-EPA [US-EPA. Guidelines for Ecological Risk Assessment. EPA/630/R-95/002F. Final Report. U.S. Environmental Protection Agency, Washington, DC; 1998.] procedure. Experimental concentrations of dioxin-like PCBs and PCDD/Fs in sediments, water, and organisms in six lagoon zones were used to define the spatial distribution of the pollutant homolog patterns. The Principal Component Analysis of homolog patterns in biota permitted to remark the difference between PCDD/Fs and dioxin-like PCBs bioaccumulation. Dioxin-like PCBs were found almost unaltered in all selected organisms, while PCDD/Fs homologs underwent an enrichment of low chlorinated furans in fish. The ecological risk for the dioxin-like PCBs and PCDD/Fs was estimated in the selected lagoon zones according to the Hazard Quotient approach by comparing the biota experimental concentrations in TEQ with an Internal No Effect Concentration of the 2,3,7,8-TCDD, estimated from both Ambient Quality Criteria and literature toxicity data. A high potential risk was found for benthic biota (i.e. clam and crab) and for mussel, while a negligible risk was estimated for fish. Moreover, the ecological risk resulted higher in the central part of the lagoon, and lower in the northern lagoon. Finally, the comparison between the TEQ concentrations of each homolog in biota and the estimated ecological risk highlighted that the risk was determined essentially by lower chlorinated PCDD/Fs (i.e. pentachloro and hexachloro PCDD/Fs), and by pentachloro-PCBs. These compounds should be regarded as homologs of concern and preferentially investigated in environmental monitoring of sediment, water, and biota.     

Presence, biotransformation and effects of sulfophenylcarboxylic acids in the benthic fish Solea senegalensis

The presence of linear alkylbenzene sulfonates (LAS) and their degradation intermediates, sulfophenylcarboxylic acids (SPCs), with concentrations up to 100 ppb has been found in surface waters taken from the estuary of the river Guadalete (Cádiz, SW of Spain). Higher concentrations were found at the sampling site located adjacent to the discharge outlet of a wastewater treatment plant (WWTP). The concentrations decreased downstream to a few ppb as a result of dilution, sorption, and degradation processes, which were taking place along the estuary. Once the presence of both xenobiotics was confirmed in the environment, an in vivo assay was conducted to study their biotransformation and effects in the benthic fish Solea senegalensis. A flow-through system was employed, consisting of an exposure phase (120 h) with environmental levels of the surfactant (200, 500 and 800 microg/L of 2?C(10)LAS), followed by a depuration stage (72 h). The generation of SPCs has been quantified during these phases in both water and fish, with LAS biotransformation shown in all cases. The antioxidant enzymes catalase (CAT), glutathione peroxidase (GPX), glutathione reductase (GR), the phase II enzyme glutathione S-transferase (GST), and the phase III acid and alkaline phosphatases (AcP, ALP) were also estimated and utilized as biomarkers.     

Muskox status,recent variation,and uncertain future

Ambio - Muskoxen (Ovibos moschatus) are an integral component of Arctic biodiversity. Given low genetic diversity, their ability to respond to future and rapid Arctic change is unknown, although...     

Development of an activated carbon impregnation process with iron oxide nanoparticles by green synthesis for diclofenac adsorption

The objective of this study was to impregnate the surface of palm coconut activated carbon with nanoparticles of iron compounds using Moringa oleifera leaf extracts and pomegranate leaf by a green synthesis method and to evaluate its adsorption capacity for sodium diclofenac. The adsorbent material was characterized by zeta potential, X-ray diffraction (XRD), N₂ adsorption/desorption (BET method), transmission electronic microscopy (TEM), and scanning electronic microscopy (SEM) coupled to dispersive energy spectrometry X-ray (EDX) methods. To evaluate the adsorption capacity of sodium diclofenac, the influence of pH, kinetics, isotherms, and thermodynamic properties were analysed. The impregnated adsorbents showed efficiency in the adsorption of sodium diclofenac. The kinetic model that best fit the experimental data was the pseudo-second-order model, and the equilibrium model was the Langmuir model. As for the thermodynamic study, it was verified that the adsorption reaction for all adsorbents occurs in a spontaneous, favourable way, and it is endothermic by physisorption. Therefore, this process is promising because it is a clean and non-toxic method when compared with chemical methods for the synthesis of nanoparticles.

     

Biogeochemical consequences of a changing Arctic shelf seafloor ecosystem

Unprecedented and dramatic transformations are occurring in the Arctic in response to climate change, but academic, public, and political discourse has disproportionately focussed on the most visible and direct aspects of change, including sea ice melt, permafrost thaw, the fate of charismatic megafauna, and the expansion of fisheries. Such narratives disregard the importance of less visible and indirect processes and, in particular, miss the substantive contribution of the shelf seafloor in regulating nutrients and sequestering carbon. Here, we summarise the biogeochemical functioning of the Arctic shelf seafloor before considering how climate change and regional adjustments to human activities may alter its biogeochemical and ecological dynamics, including ecosystem function, carbon burial, or nutrient recycling. We highlight the importance of the Arctic benthic system in mitigating climatic and anthropogenic change and, with a focus on the Barents Sea, offer some observations and our perspectives on future management and policy.     

Pilot project of mechanical-biological treatment of waste in Brazil

By mechanical-biological treatment (MBT) of residual municipal solid waste the behaviour of landfills can be significantly improved. After MBT the organic content (COD and BOD5), total organic carbon, and total nitrogen in the leachate, as well as the gas production rate, are reduced to values lower than 90% of the fresh untreated waste. The volume of the stabilized material to be disposed on landfills decreases enormously, by up to 70%. The monitoring effort for a landfill constructed under these conditions is reduced to a minimum and the stabilized material can be used in other ways, as material for reforestation, for cover material or for thermal utilization to produce energy. Environmental conditions are important in MBT, as well as waste characteristics. This paper describes the results of a pilot project of MBT performed in Rio de Janeiro, Brazil. The results have shown that this technology can be used successfully in developing countries, with economy for the society and important results for the environment.     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.