Comparative effects of mine wastes on the benthos of an acid and an alkaline pond

Benthic invertebrates collected from an acid (pH 3.2) and an alkaline (pH 7.9) tailing pond in the Rouyn-Noranda mining region were compared with those of a control pond in order to assess the effects of the pH on the benthic community structure and on metal accumulation by invertebrates. The acid pond showed high mean soluble concentrations of aluminium (2600 ppb), copper (230 ppb), iron (6500 ppb) and zinc (4900 ppb) in the water and high mean concentrations of copper (340 ppm), iron (15,238 ppm) and zinc (445 ppm) in the sediments. The benthic fauna was dominated by Chironomus spp and the water beetle Ilybius sp. The Shannon-Weaver diversity index was 0.04. The alkaline pond had high mean sediment concentrations of cadmium (21 ppm), iron (15,823 ppm), manganese (658 ppm) and nickel (146 ppm). A total of 37 insect genera and a diversity index of 3.4 were recorded for this pond. Of the seven metals studied only copper and aluminium showed greater accumulations in the biota of the contaminated ponds than in that of the control. Insects dominated the benthic fauna in both contaminated ponds and crustacea in the control.     

The sensitivity of surface waters of Great Britain to acidification predicted from catchment characteristics

Using a combination of soil, land use and geological information, a map of Great Britain has been derived which indicates the sensitivity of surface waters to acidification. For the geological information, a slightly modified version of an available map was used which indicated the sensitivity of groundwaters to acidification. For soils, 1-km databases of soil information for England and Wales and for Scotland were employed to map the soil sensitivity as determined by buffering capacity. The derived soils map was modified to take account of agricultural liming in arable and managed grassland areas using the ITE Land Classification. The final map of surface water sensitivity was obtained by using a geographic information system overlay procedure which enabled each combination of soil and geology sensitivity to be uniquely defined. The final sensitivity classification was based upon expert knowledge and the experience of a similar sensitivity mapping exercise for Wales.     

Characterization of food waste and bulking agents for composting

The characterization of food waste (FW) and locally available bulking agents (BA) are a prerequisite to optimizing compost recipes. This study measured the variation in FW characteristics (pH, dry matter (DM), carbon (C), wet bulk density and Total Kjeldahl Nitrogen (TKN)) produced by a restaurant and a community kitchen in downtown Montreal, Canada from May to August 2004. The project also measured the mass of FW produced by another restaurant and a group of 20-48 households, from June to August 2004. Locally available BA (hay, straw, pine wood shavings, cardboard, left over cattle feed and wheat residue pellets) were also characterized to formulate composting recipes based on the FW characteristics observed during a period representative of winter and summer conditions. Residential and restaurant FW characteristics varied significantly over the summer months, although the mass produced remained constant at 0.61 and 0.56 kg capita(-1)day(-1), respectively. In addition, the number of customers served by the restaurant increased by nearly 50% from June to August. The BA with the highest moisture adsorption capacity was found to be the wheat residue pellets, followed by chopped straw. Wheat residue pellets, chopped hay and left over cattle feed all presented a balanced C/N ratio. Wheat residue pellets and wheat straw, chopped hay and cardboard demonstrated neutral pH values. Based on the variable FW characteristics and monthly production rates, the formulation of recipes indicates that compost facilities must be flexible enough to handle seasonal variations of as much as 50% by volume.     

Characterization of food waste generators: a Hawaii case study

Information on food waste disposal and on recycling methods and recycled amounts is reported. Data were obtained from a mail and phone survey of all licensed food establishments in Hawaii conducted in 2004 and 2005. Of 8253 licensed food establishments, 5033 completed surveys. It was found that relationships exist between food establishment size (measured by the number of meals served per day or the number of employees) and the amount of food an establishment recycled; establishment type and recycling behavior; and establishment type and amount recycled. The amount of food waste recycled in the state of Hawaii was estimated to be 264,000 L/day and annual food waste generation was estimated to be 336,000 tonnes.     

Mechanical properties of concrete containing a high volume of tire-rubber particles

Due to the increasingly serious environmental problems presented by waste tires, the feasibility of using elastic and flexible tire-rubber particles as aggregate in concrete is investigated in this study. Tire-rubber particles composed of tire chips, crumb rubber, and a combination of tire chips and crumb rubber, were used to replace mineral aggregates in concrete. These particles were used to replace 12.5%, 25%, 37.5%, and 50% of the total mineral aggregate's volume in concrete. Cylindrical shape concrete specimens 15 cm in diameter and 30 cm in height were fabricated and cured. The fresh rubberized concrete exhibited lower unit weight and acceptable workability compared to plain concrete. The results of a uniaxial compressive strain control test conducted on hardened concrete specimens indicate large reductions in the strength and tangential modulus of elasticity. A significant decrease in the brittle behavior of concrete with increasing rubber content is also demonstrated using nonlinearity indices. The maximum toughness index, indicating the post failure strength of concrete, occurs in concretes with 25% rubber content. Unlike plain concrete, the failure state in rubberized concrete occurs gently and uniformly, and does not cause any separation in the specimen. Crack width and its propagation velocity in rubberized concrete are lower than those of plain concrete. Ultrasonic analysis reveals large reductions in the ultrasonic modulus and high sound absorption for tire-rubber concrete.     

Assessing the Geographic Representativeness of Genebank Collections: the Case of Bolivian Wild Potatoes

Abstract: Genebank collection databases can be used for ecogeographical studies under the assumption that the accessions are a geographically unbiased sample. We evaluated the representativeness of a collection of wild potatoes from Bolivia and defined and assessed four types of bias: species, species-area, hotspot, and infrastructure. Species bias is the sampling of some species more often than others. Species-area bias is a sampling that is disproportionate to the total area in which a species is found. Hotspot bias is the disproportionate sampling of areas with high levels of diversity. Infrastructure bias is the disproportionate sampling of areas near roads and towns. Each of these biases is present in the Bolivian wild potato collection. The infrastructure bias was strong: 60% of all wild potato accessions were collected within 2 km of a road, as opposed to 22%, if collections had been made randomly. This analysis can serve as a guide for future collecting trips. It can also provide baseline information for the application of genebank data in studies based on geographic information systems.     

Phylogeny and biogeographic history of hake (genus Merluccius), inferred from mitochondrial DNA control-region sequences

 Phylogenetic analyses of the left domain of the mitochondrial DNA control-region sequence have been used to examine the relationships among species of the genus Merluccius (Rafinesque, 1810), and to compare these with hypotheses based on morphological, meristic and allozyme characters. Analysis of aligned sequences revealed that transition bias was much lower than in mammalian mtDNA, and that nucleotide composition of control-region sequences was biased toward A and T. We have roughly calibrated a molecular clock for the genus, based on the rise of the Isthmus of Panamá, which is believed to have created a barrier to dispersal between marine species of the Atlantic and Pacific Oceans. Our mtDNA-based phylogeny was highly congruent with allozyme-based phylogenies, but poorly so with a previously described phylogeny based on morphology. Specifically, our phylogeny resolved two well-supported principal clades, one of American (west Atlantic and east Pacific) species and the other of Euro–African (east Atlantic) species. This suggests an evolutionary history during which the ancestral lineage of Merluccius was divided between two geographic regions, with subsequent dispersal and vicariant events resulting in the evolution and distribution of extant taxa. However, the relationships between some taxa within the American clade could not be resolved. We suggest that this is consistent with an hypothesis of a rapid origin and radiation of these taxa. Received: 12 December 1998 / Accepted: 15 October 1999     

Cadmium accumulation in the female shore crab Carcinus maenas during the moult cycle and ovarian maturation

 The influence of moulting and ovarian maturation on cadmium accumulation in the tissues of female shore crabs Carcinus maenas exposed to 1 mg Cd l⁻¹ in the water was investigated. Cadmium accumulation in all tissues examined was markedly increased in crabs in the postmoult stages (A and B) compared to crabs in all other moult stages. During the moult cycle, average cadmium accumulation in the midgut gland ranged from 29 μg Cd g⁻¹ dw at premoult stage (D₂) to 589 μg Cd g⁻¹ dw at postmoult stage (A). Average cadmium concentrations in the haemolymph ranged from 0.56 μg Cd ml⁻¹ at intermoult stage (C₄) to 4.6 μg Cd ml⁻¹ at postmoult stage (A), while the gills accumulated from 103 μg Cd g⁻¹ dw in intermoult stage (C₃) to 352 μg Cd g⁻¹ dw in postmoult stage (A). Cadmium concentration in gills and haemolymph was also significantly higher in crabs in late premoult stage (D₃) compared to C₄-crabs, while midgut gland cadmium concentration remained elevated in C₁- and C₃- intermoult stages relative to C₄. During ovarian maturation the cadmium accumulation in midgut gland, gills, ovaries and haemolymph decreased. Average cadmium concentration in the midgut gland decreased from 63 μg g⁻¹ dw in ovarian Stage I to 19 μg g⁻¹ dw in ovarian Stage VI. The same pattern was observed for gills, haemolymph and ovaries. The present study demonstrates that cadmium accumulation in the female shore crab strongly depends on the physiological status of the animal. A possible association between physiological calcium requirements and cadmium accumulation during moulting is discussed. Received: 20 January 2000 / Accepted: 20 July 2000     

The nature of heat coma in Littorina littorea (Mollusca: Gastropoda)

 The nature of heat coma was examined in the edible periwinkle Littorina littorea (L.). Duration of acclimation did not influence heat-coma temperature at 12 °C, although other acclimation temperatures were important in influencing thermal tolerance, with positive shifts in coma temperature observed in response to elevated temperatures. Previous thermal history also influenced heat-coma temperatures. Individuals subjected to repeat heat-coma events on a daily basis showed significant declines (P < 0.05) in coma-temperature; in contrast individuals exposed to repeat heat-coma events on a weekly basis showed no decline in thermal tolerance. Size-effects occurred at selected sites, where decreased heat-coma temperatures were recorded in large individuals. Received: 16 August 1999 / Accepted: 13 June 2000