PM2.5 assessment in 21 European study centers of ECRHS II: Method and first winter results

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989-1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 microm aerodynamic diameter (PM2.5) in the ECRHS II and to present the PM2.5 results from the winter period 2000-2001. Because PM2.5 is not routinely monitored in Europe, we measured PM2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year. Winter mean PM2.5 mass concentrations (November 2000-February 2001) varied substantially, with Iceland reporting the lowest value (5 microg/m3) and northern Italy the highest (69 microg/m3). A standardized procedure appropriate for PM2.5 exposure assessment in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM2.5, however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.     

Investigation of appropriate initial composition and aeration method for co-composting of yard waste and market wastes

The purpose of this research was to shorten the composting period by speeding up the composting process and to obtain good quality compost that can be used in agriculture. In order to accomplish the acceleration of the process, different mixtures of feedstock were loaded to the composting containers to observe the effect of initial composition on the quality of the compost and the rate of composting. The first feedstock prepared was composed of grass, leaves and market waste whereas the second feedstock composed only of leaves and market wastes. Composting process was accomplished by applying different composting methods such as composting without manual stirring, with manual stirring, with aeration by air, with aeration by oxygen, with manual stirring and aeration by air and finally by with manual stirring and aeration by oxygen to achieve the purpose of the research. Aeration was found as a primary requirement for the acceleration of composting because it was observed that when the aeration was not applied the conversion of nutrients was very low. The high conversion efficiency of the nutrients in the feedstock with market and yard wastes-without grass-resulted in higher quality end product. The organic content of the composted yard and market wastes were monitored and the best operational parameters and methods were identified. Parameters such as temperature, moisture, pH and end-product metal contents were also monitored in the study. and the experiments were run in duplicates. Corrected C/N, (C/N)t/(C/N)initial, were used in the calculations which provided objectivity in comparison of the compost quality with respect to nutritional components. The C/N change was found to be higher in the container that was manually stirred and aerated with oxygen but with regard to the economic feasibility of the system aeration with air was preferred. Compost quality that was achieved in the study was compared to the standards of different countries with respect to the amount of metal contents in the end-product. The applicability of the end-product in agriculture depends on the level of contaminants in the compost, especially metals that have to be present only in trace amounts.     

Methane oxidation in two Swedish landfill covers measured with carbon-13 to carbon-12 isotope ratios

The release of methane (CH4) from landfills to the atmosphere and the oxidation of CH4 in the cover soils were quantified with static chambers and a 13C-isotope technique on two landfills in Sweden. One of the landfills had been closed and covered 17 years before this investigation while the other was recently covered. On both landfills, the tops of the landfills were compared with the sloping parts in the summer and winter. Emitted CH4, captured in chambers, was significantly enriched in 13C during summer compared with winter (P < 0.0001), and was enriched relative to anaerobic-zone methane. The difference between emitted and anaerobic zone delta 13C-CH4 was used to estimate soil methane oxidation. In summer, these differences ranged from 9 to 26@1000, and CH4 oxidation was estimated to be between 41 and 50% of the produced CH4 in the new landfill, and between 60 and 94% in the old landfill. In winter, when soil temperature was below 0 degree C, no difference in delta 13C was observed between emitted and anaerobic-zone CH4, suggesting that there was no soil oxidation. The temperature effect shown in this experiment suggests that there may be both seasonal and latitudinal differences in the importance of landfill CH4 oxidation. Finally the isotopic fractionation factor (alpha) varied from 1.023 to 1.038 and was temperature dependent, increasing at colder temperatures. Methanotrophic bacteria appeared to have high growth efficiencies and the majority of the methane consumed in incubations did not result in immediate CO2 production.     

The consequences of tourism for sustainable water use on a tropical island: Zanzibar, Tanzania

Many developing countries in the tropics have focused on tourism to generate additional income sources and to diversity the economy. Coastlines in particular have been on the forefront of tourist infrastructure development. Here, the presence of a large number of tourists has often had negative consequences for the sustainable use of the available resources, which in turn has had an effect on the integrity of the ecosystems. In this paper, the situation is described for the use of freshwater resources on the east coast of Zanzibar, Tanzania. This region is water poor, relying on freshwater derived from seasonal rains and stored in less efficient aquifers, which consist of freshwater lenses floating on the underlying seawater. Tourism in the area has grown rapidly in recent years and is expected to further increase in the future. This development is expected to put additional pressure on the freshwater resources of the east coast, which show already signs of over-use. The consequences of overexploitation can include the lowering of the groundwater table, land subsidence, deteriorating groundwater quality, and saltwater intrusion. These, in turn, determine the living conditions in coastal areas and the effects will be felt both by the local populations and the tourist industry. An investigation is made into the causes and consequences of water abstraction by the tourist industry. The results show that present levels of withdrawal are not sustainable, and parts of the local populations are already experiencing water deficits on a daily basis. In the future, if the expected increase in tourist numbers occurs, the pressure on the aquifers will correspondingly increase. The results could be that the tourism in the area becomes unsustainable, which could have an adverse effect on the national economy and also on the local population and environment. Therefore, a precautionary water-management approach is suggested.     

Monitoring, modelling and environmental exposure assessment of industrial chemicals in the aquatic environment

Monitoring and laboratory data play integral roles alongside fate and exposure models in comprehensive risk assessments. The principle in the European Union Technical Guidance Documents for risk assessment is that measured data may take precedence over model results but only after they are judged to be of adequate reliability and to be representative of the particular environmental compartments to which they are applied. In practice, laboratory and field data are used to provide parameters for the models, while monitoring data are used to validate the models' predictions. Thus, comprehensive risk assessments require the integration of laboratory and monitoring data with the model predictions. However, this interplay is often overlooked. Discrepancies between the results of models and monitoring should be investigated in terms of the representativeness of both. Certainly, in the context of the EU risk assessment of existing chemicals, the specific requirements for monitoring data have not been adequately addressed. The resources required for environmental monitoring, both in terms of manpower and equipment, can be very significant. The design of monitoring programmes to optimise the use of resources and the use of models as a cost-effective alternative are increasing in importance. Generic considerations and criteria for the design of new monitoring programmes to generate representative quality data for the aquatic compartment are outlined and the criteria for the use of existing data are discussed. In particular, there is a need to improve the accessibility to data sets, to standardise the data sets, to promote communication and harmonisation of programmes and to incorporate the flexibility to change monitoring protocols to amend the chemicals under investigation in line with changing needs and priorities.     

Mass Spectrometric Detection and Identification of Polar Pesticides and their Degradation Products - A Comparison of Different Ionization Methods

Due to increasing use of polar pesticides, they are found together with their degradation products in ground- and surface waters serving for drinking water treatment. The triazine derivatives acetamido-atrazine, ametryne, atrazine, cyanazine, deethylatrazine, deethyldeisopropyl-hydroxyatrazine, deethyl-hydroxyatrazine, deisopropyl-atrazin, deisopropyl-hydroxyatrazine, desmetryn, hydroxyatrazine, prometryne, propazine, simazine, terbumeton, terbutryne and terbutylazine, and the pesticides 2,4-D, dichlorprop, isoproturon, diuron, metolachlor, glyphosate, metsulfuronmethyl and dalapon, all of them belonging to this type of pesticides, have been studied. For determination of triazine derivatives UV detection by means of diode array detector (DAD) as well as mass spectrometric (MS) detection coupled by thermospray interface (TSP) have been used successfully after liquid chromatoraphic (LC) separation. Interfaces like thermospray (TSP), electrospray (ESP) and atmospheric pressure chemical ionisation (APCI) were examined with regard to their suitability for substance-specific detection of polar pesticides by flow injection analysis (FIA) with MS- and tandem mass spectroscopic detection (MS/MS) without preceding LC separation. Optimised detection conditions for these pesticides using FIA are presented, and solutions for occurring problems are offered.     

Layer of organic pine forest soil on top of chlorophenol-contaminated mineral soil enhances contaminant degradation

Chlorophenols, like many other synthetic compounds, are persistent problem in industrial areas. These compounds are easily degraded in certain natural environments where the top soil is organic. Some studies suggest that mineral soil contaminated with organic compounds is rapidly remediated if it is mixed with organic soil. We hypothesized that organic soil with a high degradation capacity even on top of the contaminated mineral soil enhances degradation of recalcitrant chlorophenols in the mineral soil below. We first compared chlorophenol degradation in different soils by spiking pristine and pentachlorophenol-contaminated soils with 2,4,6-trichlorophenol in 10-L buckets. In other experiments, we covered contaminated mineral soil with organic pine forest soil. We also monitored in situ degradation on an old sawmill site where mineral soil was either left intact or covered with organic pine forest soil. 2,4,6-Trichlorophenol was rapidly degraded in organic pine forest soil, but the degradation was slower in other soils. If a thin layer of the pine forest humus was added on top of mineral sawmill soil, the original chlorophenol concentrations (high, ca. 70 μg g^?1, or moderate, ca. 20 μg g^?1) in sawmill soil decreased by >40 % in 24 days. No degradation was noticed if the mineral soil was kept bare or if the covering humus soil layer was sterilized beforehand. Our results suggest that covering mineral soil with an organic soil layer is an efficient way to remediate recalcitrant chlorophenol contamination in mineral soils. The results of the field experiment are promising.     

Integrating energy efficiency performance in production management – gap analysis between industrial needs and scientific literature

For governments and for manufacturing companies, global warming, rising energy prices, and customers’ increasing ecological awareness have pushed energy efficient manufacturing to the top of the agenda. Governments and companies are both striving to identify the most effective measures to increase energy efficiency in manufacturing processes. Based on results of a recent EU-funded roadmapping project, this paper highlights the needs of industrial companies for integrating energy efficiency performance in production management. First, it analyses concepts and tools for measurement, control and improvement of energy efficiency in production management proposed in literature. Second, the paper outlines that ICT tools and standardization are important enablers for energy efficient manufacturing. Third, industrial needs in these areas are presented based on expert interviews. The industrial needs thus identified are contrasted with concepts proposed in literature to point out the implementation gaps between practice and theory. The paper demonstrates that there exists a gap between the solutions available and the actual implementation in industrial companies. It concludes by deriving requirements for energy management in production that future collaborative research projects should address.     

Stem cell transplantation before birth – a realistic option for treatment of osteogenesis imperfecta?

Osteogenesis imperfecta (OI) is characterized by severe bone deformities, growth retardation and bones that break easily, often from little or no apparent cause. OI is a genetic disorder primarily with defective type I collagen with a wide spectrum of clinical expression. In the more severe cases, it can be diagnosed before birth. Transplantation of mesenchymal stem cells (MSC) has the potential to improve the bone structure and stability, growth and fracture healing. Prenatal and postnatal cell transplantation has been investigated in preclinical and clinical studies of OI and suggests that this procedure is safe and has positive effects. Cell transplantation resulted in improved linear growth, mobility and reduced fracture incidence. However, the effect is transient and for this reason re-transplantation may be needed. So far there is limited experience in this area, and proper studies are required to accurately determine if MSC transplantation is of clinical benefit in the treatment of OI. In this review, we summarize what is currently known in this field. © 2015 John Wiley & Sons, Ltd.