U- and Th-series radionuclides in snowshoe hare (Lepus americanus) taken near U mill tailings close to Elliot Lake, Ontario, Canada

Snowshoe hare (Lepus americanus) trapped near U tailings had higher concentrations of (226)Ra in their bones (250 +/- 94 mBq g(-1) dry wt) than those from local control sites 3-15 km from the tailings (20-30 mBq g(-1) dry wt) and those from a distant control site 880 km away from the U mining area, which were below the detection limit (DL) (3.7 mBq g(-1) dry wt). Most chyme (stomach content) samples contained 226Ra below DL. Concentration ratios of 226Ra from tissues of local plants, considered important in the hare's diet, to bone ranged from 0.22 to 8.60. Concentrations of 210Pb and 210Po (95-245 mBq g(-1) dry wt) were not significantly different among tailings and control site populations. Disequilibrium between these isotopes and their precursors was noted. No significant accumulation of U and Th was noted at any site. Higher concentrations of 228Th compared to 232Th are attributed to accumulation of 228Ra in a manner similar to that of 226Ra. Based on bone 226Ra and 210Po contents, the maximum internal dose rates to the skeleton and the maximum life-time dose of hare living near tailings were 3.9 x 10(-5) Gy d(-1) and 4.2 x 10(-2) Gy, respectively. These rates were below the threshold required to produce osteosarcoma in other mammals and were considered unlikely to adversely affect hare during their lifetime. Radionuclide uptake by the animals was concluded to have no environmental significance in the transport of radionuclides from tailings to other locations.     

Multi-criteria analysis and risk assessment

ELECTRE or Concordance Analysis is a French system of multicriteria analysis which is used in economics.The application of ELECTRE for hazard evaluation and risk assessment of chemical substances is suggested, and a first attempt in adapting it for this purpose is presented.     

4-Methylsterols in recent lacustrine sediments: Terrestrial,planktonic or some other origin?

Sediment cores from oxygen depleted zones of lake Léman (lake of Geneva) and from anoxic surface sediment from Voua de la Motte (France) were analyzed for their sterol compositions. 4-methylstanols were found to be major sterols in Motte lake sediment, which is rich in organic matter. In lake Léman, the relative abundances of the same 4-methylstanols increase with the depth in the core, but they remain always minor compounds. An extensive search for a possible external source for these compounds included the analysis of water, of the plankton and of the surrounding soil material. All these results, along with those of an in situ incubation experiment, give strong evidence in favor of their in situ bacterial biosynthesis.     

Brominated flame retardant concentrations and trends in abiotic media

BFR burdens in abiotic media have been less studied than in biota, despite their essential value as an aide to identifying sources, temporal and geographic trends and exposure routes. Many polymer products consist of several percent by weight of BFRs. Global trade in these can result in rapid and wholesale BFR movement. Loss from in-use products of nonreactive BFRs may be important, particularly in respect to indoor exposure. In the case of BDE-209, discharges from publicly owned treatment works may be substantial. BFR burdens in air, water and sewage sludge respond rapidly to changes in environmental BFR inputs. PBDEs have been the most widely studied. In many locales PBDE burdens in these media now surpass those of PCBs. Air and water near sources and urban areas are typically enriched relative to rural locales. The more volatile PBDEs dominate in the vapor phase, while BDE-209 typically predominates on particulates. Evidence exists for long-range transport of the more volatile PBDEs. A greater diversity of BFRs (mostly PBDEs, HBCD and TBBP-A) has been detected in sewage sludges. Land application of these sludges on agricultural fields is one conduit for soil contamination. In general, environmental concentrations of BDE-209 appear to be increasing, while penta-BDE burdens in Europe may have peaked. Sediments function as longer-term integrators of environmental burdens. Concentrations of common BFRs therein may be substantial near point sources. Evidence for debromination in the environment has been limited to date. However, some laboratory and field observations suggest it is possible to a limited extent.     

Remediation of contaminated agricultural soils near a former Pb/Zn smelter in Austria: batch, pot and field experiments

Metal contaminated crops from contaminated soils are possible hazards for the food chain. The aim of this study was to find practical and cost-effective measures to reduce metal uptake in crops grown on metal contaminated soils near a former metal smelter in Austria. Metal-inefficient cultivars of crop plants commonly grown in the area were investigated in combination with in-situ soil amendments. A laboratory batch experiment using 15 potential amendments was used to select 5 amendments to treat contaminated soil in a pot study using two Barley (Hordeum vulgare L.) cultivars that differed in their ability to accumulate cadmium. Results from this experiment identified 3 of these amendments for use in a field trial. In the pot experiment a reduction in ammonium nitrate extractable Cd (<41%) and Pb (<49%) compared to the controls was measured, with a concurrent reduction of uptake into barley grain (Cd<62%, Pb<68%). In the field extractable fractions of Cd, Pb, and Zn were reduced by up to 96%, 99%, and 99%, respectively in amended soils.     

Occurrence and accumulation of organochlorine contaminants in swordfish from Mediterranean Sea: a case study

Polychlorinated biphenyls including coplanar congeners and DDT compounds were measured in the liver of a teleost species: namely, Xiphias gladius. PCB concentrations (median: 1121 ng/g lipid wt) were comparable with DDT levels (median: 1236 ng/g lipid wt). PCBs revealed a profile dominated by hexa-, penta- and heptachlorinated congeners. Among DDTs, the compound in the greatest concentration was p,p'-DDE, representing 70% of the total DDT burden, followed by o,p'-DDT>p,p'-DDT>p,p'-DDD=o,p'-DDD. Mean total 2,3,7,8-TCDD equivalent of five coplanar PCBs was 8.83 pg/g lipid weight. The isomers with higher TEQs values were non-ortho congeners than mono-ortho ones.     

Uranium transport around the reactor zone at Bangombé and Okélobondo (Oklo): examples of hydrogeological and geochemical model integration and data evaluation

The sites at Bangombé and Okélobondo (Oklo) in Gabon provide a unique opportunity to study the behaviour of products from natural nuclear reactions in the vicinity of reactor zones which were active around two billion years ago. The Commission of the European Communities initiated the Oklo Natural Analogue Programme. One of the principal aims was to study indications of present time migration of elements from the reactor zones under ambient conditions. The hydrogeological and hydrochemical data from the Oklo sites were modelled in order to better understand the geochemical behaviour of radionuclides in the natural system, by using independent models and by comparing the modelling outcome. Two modelling approaches were used: M3 code (hydrochemical mixing and mass balance model), developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) and HYTEC (reactive transport model) developed by Ecole des Mines de Paris. Two different reactor zones were studied: Bangombé, a shallow site, the reactor being at 11 m depth, and OK84 at Okélobondo, situated at about 450 m depth, more comparable with a real repository location. This allowed the validation of modelling tools in two different sedimentary environments: one shallow, with a more homogeneous layering situated in an area of meteoric alteration, and the other offering the opportunity to study radionuclide migration from the reaction zone over a distance of 450 m through very heterogeneous sedimentary layers. The modeling results indicate that the chemical reactions retarding radionuclide transport are very different at the two sites. At Bangombé, the decomposition of organic material consumes oxygen and at Okélobondo the oxygen is consumed by inorganic reactions resulting, in both cases, in uranium retardation. Both modelling approaches (statistic with M3 code and deterministic with HYTEC code) could describe this situation. The goal of this exercise is to test codes which can help to describe and understand the processes taking place at the sites, validate the models with in situ data, and thus build confidence in the tools used for future site characterization. Ultimately, this allows identifying and selecting processes and parameters that can be used as input into repository performance assessment calculations and modelling exercises.     

Electrochemical degradation of chlorophenoxy and chlorobenzoic herbicides in acidic aqueous medium by the peroxi-coagulation method

The degradation of 4-chlorophenoxyacetic acid (4-CPA), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) as chlorophenoxy herbicides, as well as of 3,6-dichloro-2-methoxybenzoic acid (dicamba) as chlorobenzoic herbicide, has been studied by peroxi-coagulation. This electrochemical method yields a very effective depollution of all compounds in acidic aqueous medium of pH 3.0 working under pH regulation, since they are oxidized with hydroxyl radicals produced from Fenton's reaction between Fe(2+) and H(2)O(2) generated by the corresponding Fe anode and O(2)-diffusion cathode. Their products can then be removed by mineralization or coagulation with the Fe(OH)(3) precipitate formed. Both degradative paths compete at low currents, but coagulation predominates at high currents. The peroxi-coagulation process of dicamba at I>or=300 mA leads to more than 90% of coagulation, being much more efficient than its comparative electro-Fenton treatment with a Pt anode and 1 mM Fe(2+), where only mineralization takes place. For the chlorophenoxy compounds, electro-Fenton gives a slightly lower depollution than peroxi-coagulation, because more easily oxidable products are produced. Oxidation of chlorinated products during peroxi-coagulation is accompanied by the release of chloride ion to the solution. The efficiency of this method decreases with increasing electrolysis time and current. The decay of all herbicides follows a pseudo-first-order reaction, with a similar constant rate for 4-CPA, MCPA, 2,4-D and 2,4,5-T, and a higher value for dicamba.     

Multivariate statistical study of heavy metal enrichment in sediments of the Pearl River Estuary

The concentrations and chemical partitioning of heavy metals in the sediment cores of the Pearl River Estuary were studied. Based on Pearson correlation coefficients and principal component analysis results, Al was selected as the concentration normalizer for Pb, while Fe was used as the normalizing element for Co, Cu, Ni and Zn. In each profile, sections with metal concentrations exceeding the upper 95% prediction interval of the linear regression model were regarded as metal enrichment layers. The heavy metal accumulation mainly occurred at sites in the western shallow water areas and east channel, which reflected the hydraulic conditions and influence from riparian anthropogenic activities. Heavy metals in the enrichment sections were evaluated by a sequential extraction method for possible chemical forms in sediments. Since the residual, Fe/Mn oxides and organic/sulfide fractions were dominant geochemical phases in the enriched sections, the bioavailability of heavy metals in sediments was generally low. The 206Pb/207Pb ratios in the metal-enriched sediment sections also revealed the influence of anthropogenic sources. The spatial distribution of cumulative heavy metals in the sediments suggested that the Zn and Cu mainly originated from point sources, while the Pb probably came from non-point sources in the estuary.